Factory For Glass Beads - Stainless steel grit – TAA
Factory For Glass Beads - Stainless steel grit – TAA Detail:
Features
* Can be used to replace a variety of mineral sands & non-metallic abrasives,such as corundum, silicon carbide, arenaceous quartz, glass beads, etc.
* Low dust emissions,improving operating environment, environmental friendly.
* Can replace part of the pickling process.
* Low dust emission and excellent operating environment, reducing the treatment of pickling waste.
* Low comprehensive cost, the service life is 30-100 times that of non-metallic abrasive such as corundum.
* Can Be Used for Different Machines: blast rooms and blast cabinets as well as in centrifugal wheel blast machines.
* Blasting systems:Both Pressure blast system, Airless blast-cleaning equipment workable.
Technical specification
Hardness: >HRC57
Density: ＞ 7.0g/cm3
|
Screen |
In |
mm |
SG18 |
SG25 |
SG40 |
SG50 |
SG80 |
|
14# |
0.0555 |
1.40 |
All pass |
||||
|
16# |
0.0469 |
1.18 |
All pass |
||||
|
18# |
0.0394 |
1.00 |
≥75% |
All pass |
|||
|
20# |
0.0331 |
0.85 |
|||||
|
25# |
0.0280 |
0.71 |
≥85% |
≥70% |
All pass |
||
|
30# |
0.0232 |
0.60 |
|||||
|
35# |
0.0197 |
0.500 |
|||||
|
40# |
0.0165 |
0.425 |
≥80% |
≥70% |
All pass |
||
|
45# |
0.0138 |
0.355 |
|||||
|
50# |
0.0117 |
0.300 |
≥80% |
≥65% |
|||
|
80# |
0.0070 |
0.180 |
≥75% |
≥60% |
|||
|
120# |
0.0049 |
0.125 |
≥70% |
Application
* Surface finishing of non-ferrous components
* Surface preparation prior to paint or coating
* Removal of ceramic from investment castings
* Descaling of non-ferrous heat treat parts
* Cleaning of welded joints
* Etching of plastic components prior to bonding
* Anchor profiling for paint and powder coat adhesion
Product detail pictures:
Related Product Guide:
As for competitive selling prices, we believe that you will be searching far and wide for anything that can beat us. We will state with absolute certainty that for such excellent at such charges we are the lowest around for Factory For Glass Beads - Stainless steel grit – TAA , The product will supply to all over the world, such as: Canberra, Malaysia, Honduras, Company name, is always regarding quality as company' s foundation, seeking for development via high degree of credibility , abiding by ISO quality management standard strictly, creating top-ranking company by spirit of progress-marking honesty and optimism.
By Elma from Niger - 2017.09.22 11:32
This manufacturer can keep improving and perfecting products and service, it is in line with the rules of market competition, a competitive company.
By Joyce from belarus - 2017.12.09 14:01
Related products
-
Wholesale Dealers of Brown Fused Alumina Manufa...
We made great improvement in material and the techniques on the basis of the traditional production process. Utilizing high quality alloy steel wire as the substrate that higher the mechanical properties and make it more stable. Improving the wiredrawing craft which make the internal organization more dense. Improving the traditional passivation process that completely relying on impacting to reduce the damage during blasting, enhancing the service life. Item Technical index Chemi...
-
Cheap price 7inch Grinding Wheel - Grinding wh...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
Low price for S930 Steel Shot - Zinc cut wire ...
Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. Features 1. Bright colour and ...
-
Cheap PriceList for Sus410 Stainless Steel Cut ...
We made great improvement in material and the techniques on the basis of the traditional production process. Utilizing high quality alloy steel wire as the substrate that higher the mechanical properties and make it more stable. Improving the wiredrawing craft which make the internal organization more dense. Improving the traditional passivation process that completely relying on impacting to reduce the damage during blasting, enhancing the service life. Item Technical index Chemi...
-
Manufacturer for Stainless Steel Beads For Blas...
Features * Can be used to replace a variety of mineral sands & non-metallic abrasives,such as corundum, silicon carbide, arenaceous quartz, glass beads, etc. * Low dust emissions,improving operating environment, environmental friendly. * Can replace part of the pickling process. * Low dust emission and excellent operating environment, reducing the treatment of pickling waste. * Low comprehensive cost, the service life is 30-100 times that of non-metallic abrasive such as corundum. * ...
-
Wholesale Dealers of Brown Fused Alumina Manufa...
We made great improvement in material and the techniques on the basis of the traditional production process. Utilizing high quality alloy steel wire as the substrate that higher the mechanical properties and make it more stable. Improving the wiredrawing craft which make the internal organization more dense. Improving the traditional passivation process that completely relying on impacting to reduce the damage during blasting, enhancing the service life. Item Technical index ...
