Factory making Diamond Cutting Disc 4 - Cutting disc FS-03 series – TAA
Factory making Diamond Cutting Disc 4 - Cutting disc FS-03 series – TAA Detail:
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diamond tools.
Advantages
Safty and environment friendly
Fast cutting and grinding,no break off,no pollution
· High efficiency
Improving efficiency of 30%-50% than traditional cutting disk
· Long service life
Using brazing technology,diamond on the surface not falling down
TAA diamond cutting disc
| Number | Picture | Specification | Safety Rotary Speed(r/min) | Application | Performance comparisons |
| FS100-03 |  |
100×1.2×16/20 | 12000 | Cutting of hard and brittle materials such as iron casting (ductile cast iron, Gray Cast iron and all kinds of iron), marble, fiber glass, ceramic tile, refractory material. Round cutter disk cut more smooth, kerf is flat. | 1. Cutting cast iron parts risers,the life of TAA is over 70 times than resin disk, efficiency increased by 100%. 2. Cutting marble area, the life of TAA is 3 times than sintered cutter disk , efficiency increased by 35%. 3. Cutting steel plate-concrete structure, the life of TAA is 100 times than resin cutting disk , efficiency is 3.5 times than resincutting disk. 4. Cutting fiber glass,the life of TAA is 100 times than resin cutter disk , efficiency increased by100%. |
| FS125-03 | 125×1.5×22.23 | 10000 | |||
| FS150-03 | 150×1.5×22.23 | 9500 | |||
| FS180-03 | 180×1.6×22.23/25.4 | 8500 | |||
| FS230-03 | 230×1.6×22.23/25.4 | 6000 | |||
| FS350-05 |  |
350×2.4X32 | 4500 | ||
| FS400-05 | 400×2.5X32 | 4000 |
Product detail pictures:
Related Product Guide:
We know that we only thrive if we can easily guarantee our combined cost competiveness and high-quality advantageous at the same time for Factory making Diamond Cutting Disc 4 - Cutting disc FS-03 series – TAA , The product will supply to all over the world, such as: Gambia, Indonesia, Gabon, "Good quality, Good service " is always our tenet and credo. We take every effort to control the quality, package, labels etc and our QC will check every detail during producing and before shipment. We are willing to establish long business relationship with those who seek the high quality products and good service. We have set up a wide sales network across European countries, North of America, South of America, Middle East, Africa, East Asia countries.Please contact us now, you will find our professional experience and high quality grades will contribute to your business.
By Louise from Malaysia - 2017.11.11 11:41
We have been engaged in this industry for many years, we appreciate the work attitude and production capacity of the company, this is a reputable and professional manufacturer.
By Esther from United Arab emirates - 2017.12.02 14:11
Related products
-
New Arrival China Glass Beads 320# - Bearing s...
Compared with traditional steel grit made by crushing steel shot, bearing steel grit has the following Features: Raw Material Bearing steel grit is made by Chromium bearing steel which has good harden ability due to its high content of Chromium. Technology Bearing steel grit is made by crushing the forged bearing steel directly which is free from casting defects. Low wear The forged state bearing steel grit with sharp edges has higher mechanical property than traditional cast steel gr...
-
Professional China Gl18 Bearing Steel Grit - S...
Features * Can be used to replace a variety of mineral sands & non-metallic abrasives,such as corundum, silicon carbide, arenaceous quartz, glass beads, etc. * Low dust emissions,improving operating environment, environmental friendly. * Can replace part of the pickling process. * Low dust emission and excellent operating environment, reducing the treatment of pickling waste. * Low comprehensive cost, the service life is 30-100 times that of non-metallic abrasive such as corundum. * ...
-
New Fashion Design for Lpg Cylinder Shot Blasti...
Available Spare parts materials Content of Cr-12%, 20%, 25% or as request. Product Features Advanced & scientific precision casting Process and technology . High efficiency and automatic single station drying production line. Special high chromium abrasion casting iron spare parts, making up gaps in the domestic industry. Original Equipment Manufactured (OEM) parts are available. We also offer quality aftermarket parts for other brand machines.
-
Big discounting Fused Brown Aluminum Oxide - G...
Features ■ Low Dust—The high intrinsic tenacity and a high proportion of the material itself fast the settlement rate and significantly reduce the dust emissions and dust coming from the workpiece, minimizing cleaning effort sandblasting, reducing pollution of the work area. ■ Excellent Surface Quality—It can deep into the voids and uneven parts to clean, thereby completely remove rust, soluble salts and other contaminants; surface blasting process without inserts, will not advers...
-
China Gold Supplier for 410 Stainless Steel Cut...
Tech Data Product Description Copper Cut Wire Shot Chemical Composition Cu: 58-99%, the rest is Zn Microhardness 110~300HV Tensile Intensity 200~500Mpa Durability 5000 Times Microstructure Deformed αorα+β Density 8.9 g/cm3 Bulk Density 5.1 g/cm3 Available sizes: 1.0mm, 1.5mm, 2.0mm, 2.5mm etc. Advantage 1. Long life time 2. Less Dust 3. Specific gravity higher than other blasting beads 4. Lower hardness than steel shot &glass beads 5. Sh...
-
OEM Factory for 0.4mm Carbon Steel Cut Wire - ...
Aluminum cut wire shot also named as aluminum shot,aluminum beads, aluminum granules, aluminum pellet. It is made from superior quality aluminum wire, appearance is bright, is an ideal media for cleaning and reinforcing the surface of nonferrous metal casting parts. It’s mainly applied for the surface treatment of Aluminum, Zinc products or work pieces with thin wall in shot blasting machine. Tech Data Products Aluminium Cut Wire Shot Chemical Composition Al≥99% Mic...
