Factory source Alloy Grit - Stainless steel cut wire shot – TAA
Factory source Alloy Grit - Stainless steel cut wire shot – TAA Detail:
Stainless steel cut wire shot is widely used for the shot/air blasting of various types of non-ferrous metal castings, stainless steel products, aluminum parts, hardware tools, natural stone, etc, highlighting the metal color and achieving smooth, rust-free, matt fi nishing surface treatment eff ect. With good quality stainless steel wire raw material, stainless steel shot is featured with uniform particles and hardness, which guarantees its long service life and good blasting eff ect. The pellets after conditioning have low wear to the blasting machines.
Stainless steel cut wire
Stainless steel cut wire G1
Stainless steel cut wire G2
Stainless steel cut wire G3
Stainless steel cut wire-As cut, cylindrical
G1 Shape-After the treatment for cut surface’s edges, to get the edges passivated
G2 Shape-Semi conditioned
G3 Shape-Get rid of all the edges to make it become ball type, almost spherical
Technical specification
|
SUS304 |
SUS430 |
SUS410 |
|||||
|
Chemical Composition |
C |
≤0.08% |
≤0.12% |
≤0.15% |
|||
|
Si |
≤1.00% |
≤1.00% |
≤1.00% |
||||
|
Mn |
≤2.00% |
≤1.00% |
≤1.00% |
||||
|
S |
≤0.030% |
≤0.030% |
≤0.030% |
||||
|
P |
≤0.045% |
≤0.040% |
≤0.040% |
||||
|
Cr |
18-20% |
16-18% |
11.5-13.5% |
||||
|
Ni |
8-11% |
/ |
/ |
||||
|
Hardness |
HRC38-52 |
HRC25-35 |
HRC20-30 |
||||
|
External form |
Cylindrical/Spherical |
||||||
|
Microstructure |
Austenitic |
Ferrite |
Deformed martensite |
||||
|
Density |
≥7.80g/cm3 |
||||||
Advantages
Produces with very bright surfaces
Dust free surfaces and lower dust when blasting
Longer life than cast abrasives and carbon cut wire shot
No ferrous contamination
No hollow,splits or twins
Available “as cut” or “conditioned”
Available sizes: 0.3mm,0.4mm,0.5mm,0.6mm,0.8mm,1.0mm,1.2mm,1.4mm, 1.5mm
Packing: 25kgs/bag,40bags/wooden pallet or as request.
Product detail pictures:
Related Product Guide:
We believe that long term partnership is a result of high quality, value added service, rich experience and personal contact for Factory source Alloy Grit - Stainless steel cut wire shot – TAA , The product will supply to all over the world, such as: St. Petersburg, Swaziland, Croatia, Customer satisfaction is our goal. We are looking forward to cooperating with you and providing our best services for you. We warmly welcome you to contact us and please feel free to contact us. Browse our online showroom to see what we can do for you. And then E-mail us your specifications or inquiries today.
By mary rash from Jordan - 2017.08.28 16:02
Sales manager is very enthusiastic and professional, gave us a great concessions and product quality is very good,thank you very much!
By Ryan from Uzbekistan - 2018.09.08 17:09
Related products
-
factory customized Stainless Steel Shot Blastin...
Compared with traditional steel grit made by crushing steel shot, bearing steel grit has the following Features: Raw Material Bearing steel grit is made by Chromium bearing steel which has good harden ability due to its high content of Chromium. Technology Bearing steel grit is made by crushing the forged bearing steel directly which is free from casting defects. Low wear The forged state bearing steel grit with sharp edges has higher mechanical property than traditional cast steel grit with...
-
Factory source Stainless Steel Cut Wire Shot 0....
Chemical Composition C 0.85-1.20% Si 0.40-1.20% Mn 0.60-1.20% S ≤0.05% P ≤0.05% Hardness HRC 40-50 Microstructure Homogeneous Tempered Martensite or Troostite Density ≥ 7.2g/cm3 External form Spherical Hollow particles<10% Size distribution Screen No. Inch Screen size S70 S110 S170 S230 S280 S330 S390 S460 S550 S660 S780 S930 6 0.132 3.35 All pass 7 0.111 2.80 All pass 8 0.0937 2.36 All...
-
Professional Design Brown Fused Alumina 36# - ...
Sponge Media abrasive are available in over 20 types,achieving profiles from 0 to 100+ micron. All procides dry, low dust, low rebound blasting. The most commomly used is TAA-S series with aluminum oxide and TAA-G series with steel grit. Type Profiles Abrasive Media Agent Application TAA-S#16 ±100 micron Aluminum Oxide#16 Fast and aggressive for tough industrial coatings. TAA-S#30 ±75 micron Aluminum Oxide#30 Removal of multilayer coatings and profile to 75 micron. TAA-S#30 ±50 micro...
-
Manufacturer of G18 Sponge Media Abrasives - S...
Sponge Media abrasive are available in over 20 types,achieving profiles from 0 to 100+ micron. All procides dry, low dust, low rebound blasting. The most commomly used is TAA-S series with aluminum oxide and TAA-G series with steel grit. Type Profiles Abrasive Media Agent Application TAA-S#16 ±100 micron Aluminum Oxide#16 Fast and aggressive for tough industrial coatings. TAA-S#30 ±75 micron Aluminum Oxide#30 Removal of multilayer coatings and profile to 75 micron. TAA-S#30 ±50 micro...
-
Factory directly Steel Grits For Blasting - Zi...
Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. Features 1. Bright colour and lustre...
-
100% Original Factory Gp50 Bearing Steel Grit -...
Sponge Media abrasive are available in over 20 types,achieving profiles from 0 to 100+ micron. All procides dry, low dust, low rebound blasting. The most commomly used is TAA-S series with aluminum oxide and TAA-G series with steel grit. Type Profiles Abrasive Media Agent Application TAA-S#16 ±100 micron Aluminum Oxide#16 Fast and aggressive for tough industrial coatings. TAA-S#30 ±75 micron Aluminum Oxide#30 Removal of multilayer coatings and profile to 75 micron. TAA-S#30 ±50 micro...
