Factory source China High Carbon Steel Grit for Surface Finishing Blasting, Cleaning, Peening G10, G12, G14, G16, G18, G25, G40, G50, G80, G120
We depend on sturdy technical force and continually create sophisticated technologies to satisfy the demand of Factory source China High Carbon Steel Grit for Surface Finishing Blasting, Cleaning, Peening G10, G12, G14, G16, G18, G25, G40, G50, G80, G120, With a wide range, good quality, reasonable prices and stylish designs,Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs.
We depend on sturdy technical force and continually create sophisticated technologies to satisfy the demand of China Metal Abrasives, Surface Cleaning, We always insist on the management tenet of “Quality is First, Technology is Basis, Honesty and Innovation”.We’re able to develop new solutions continuously to a higher level to satisfy different needs of customers.
Available Hardness:
GP: HRC46-50
Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment.
GL: HRC56-60
Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications.
GH: HRC63-65
High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment.
Production Strength:
TAA adopts Arc Furnace Smelting and Double Quenching technology, which guarantee its metal abrasives’ chemical composition and high strength, high tenacity, long service life.
Tech Data: Steel Grit
Chemical Composition% |
C |
0.85-1.2 |
Si |
0.40-1.2 |
|
Mn |
0.60-1.2 |
|
S |
≤0.050 |
|
P |
≤0.050 |
|
Hardness |
GP |
HRC 46-50 |
GL |
HRC 53-60 |
|
GH |
HRC 63-65 |
|
Density |
≥7.4 g/cm3 |
|
microstructure |
Homogeneous tempered martensite or Troostite |
|
Appearance |
Angular |
Size distribution
Screen No. |
In |
Screen Size |
SAE J444 |
|||||||||
G10 |
G12 |
G14 |
G16 |
G18 |
G25 |
G40 |
G50 |
G80 |
G120 |
|||
6 |
0.132 |
3.35 |
||||||||||
7 |
0.111 |
2.80 |
All Pass |
|||||||||
8 |
0.0937 |
2.36 |
All Pass |
|||||||||
10 |
0.0787 |
2.00 |
≥80% |
All Pass |
||||||||
12 |
0.0661 |
1.70 |
≥90% |
≥80% |
All Pass |
|||||||
14 |
0.0555 |
1.40 |
≥90% |
≥80% |
All Pass |
|||||||
16 |
0.0469 |
1.18 |
≥90% |
≥75% |
All Pass |
|||||||
18 |
0.0394 |
1.00 |
≥85% |
≥75% |
All |
|||||||
20 |
0.0331 |
0.850 |
||||||||||
25 |
0.0280 |
0.710 |
≥85% |
≥70% |
All Pass |
|||||||
30 |
0.0232 |
0.600 |
||||||||||
35 |
0.0197 |
0.500 |
||||||||||
40 |
0.0165 |
0.425 |
≥80% |
≥70% |
All Pass |
|||||||
45 |
0.0138 |
0.355 |
||||||||||
50 |
0.0117 |
0.300 |
≥80% |
≥65% |
All Pass |
|||||||
80 |
0.007 |
0.180 |
≥75% |
≥65% |
||||||||
120 |
0.0049 |
0.125 |
≥75% |
≥60% |
||||||||
200 |
0.0029 |
0.075 |
≥75% |
Application
Blast cleaning: Used for blast cleaning of casting, die-casting, forging; sand removal of casting, steel plate, H type steel, steel structure.
Rust removal: Rust removal of casting, forging, steel plate, H type steel, steel structure.
Sand blasting: Sand blasting of profile steel, ship board, steel board, steel material, steel structure.
Pre-treatment: Pre-treatment of surface, steel board, profile steel, steel structure, before painting or coating.We depend on sturdy technical force and continually create sophisticated technologies to satisfy the demand of Factory source China High Carbon Steel Grit for Surface Finishing Blasting, Cleaning, Peening G10, G12, G14, G16, G18, G25, G40, G50, G80, G120, With a wide range, good quality, reasonable prices and stylish designs,Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs.
Factory source China Metal Abrasives, Surface Cleaning, We always insist on the management tenet of “Quality is First, Technology is Basis, Honesty and Innovation”.We’re able to develop new solutions continuously to a higher level to satisfy different needs of customers.