Factory wholesale Diamond Blade Wet Saw Tile Cutter - Grinding wheels FW-07 series – TAA
Factory wholesale Diamond Blade Wet Saw Tile Cutter - Grinding wheels FW-07 series – TAA Detail:
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diamond tools
Advantages
Safty and environment friendly
Fast cutting and grinding, no break off, no pollution
· High efficiency
|
Number |
Picture |
Specification |
Safety Rotary Speed(r/min) |
Application |
Performance comparisons |
|
FW100-07 |
|
100×2.5×16 |
12000 |
Flat grinding and deburring of iron casting(ductile cast iron, Gray Cast iron) |
1. Grinding iron casting surface, TAA is over 70 times than resin disk, efficiency increased by 100% 2. Grinding steel structure weld area, TAA is 40 times than resin disk, efficiency increased by 100%. 3. Grinding fiber glass, TAA is 40 times than resin disk, efficiency increased by 100%. 4. Grinding marble and ceramic, TAA is 3 times than sintered cutter disk , efficiency increas
|
|
FW125-07 |
125×2.5×22.23 |
10000 |
|||
|
FW150-07 |
150×3.0×22.23 |
9500 |
|||
|
FW180-07 |
180×3.0×22.23 |
8500 |
|||
|
FW100-09 |
|
100×2.5×16 |
12000 |
Large aread grinding of iron casting (ductile cast iron, Gray Cast iron) |
|
|
FW125-09 |
125×2.5×22.23 |
10000 |
|||
|
FW150-09 |
150×3.0×22.23 |
9500 |
|||
|
FW180-09 |
180×3.0×22.23 |
8500 |
Improving efficiency of 30%-50% than traditional cutting disk
·Long service life
Using brazing technology,diamond on the surface not falling down
TAA diamond Grinding wheel
Product detail pictures:
Related Product Guide:
We are commitment to offer the competitive price ,outstanding products quality, as well as fast delivery for Factory wholesale Diamond Blade Wet Saw Tile Cutter - Grinding wheels FW-07 series – TAA , The product will supply to all over the world, such as: Botswana, Venezuela, Tajikistan, We follow up the career and aspiration of our elder generation, and we're eager to open up a new prospect in this field, We insist on "Integrity, Profession, Win-win Cooperation", because we have now a strong backup, that are excellent partners with advanced manufacturing lines, abundant technical strength, standard inspection system and good production capacity.
By Belle from Croatia - 2017.03.07 13:42
The company keeps to the operation concept "scientific management, high quality and efficiency primacy, customer supreme", we have always maintained business cooperation. Work with you,we feel easy!
By Eunice from Mauritius - 2017.02.14 13:19
Related products
-
Wholesale Price China Cast Stainless Grit - Be...
Compared with traditional steel grit made by crushing steel shot, bearing steel grit has the following Features: Raw Material Bearing steel grit is made by Chromium bearing steel which has good harden ability due to its high content of Chromium. Technology Bearing steel grit is made by crushing the forged bearing steel directly which is free from casting defects. Low wear The forged state bearing steel grit with sharp edges has higher mechanical property than traditional cast steel gr...
-
High definition Gp14 Steel Grit - Zinc cut wir...
Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. Features 1. Bright colour and lustre...
-
Discount wholesale Bearing Steel Grit Gp14 - S...
Chemical Composition C 0.85-1.20% Si 0.40-1.20% Mn 0.60-1.20% S ≤0.05% P ≤0.05% Hardness HRC 40-50 Microstructure Homogeneous Tempered Martensite or Troostite Density ≥ 7.2g/cm3 External form Spherical Hollow particles<10% Size distribution Screen No. Inch Screen size S70 S110 S170 S230 S280 S330 S390 S460 S550 S660 S780 S930 6 0.132 3.35 All pass 7 0.111 2.80 All pass 8 0.0937 2.36 All...
-
Newly Arrival 430 Stainless Steel Cut Wire Shot...
Aluminum cut wire shot also named as aluminum shot,aluminum beads, aluminum granules, aluminum pellet. It is made from superior quality aluminum wire, appearance is bright, is an ideal media for cleaning and reinforcing the surface of nonferrous metal casting parts. It’s mainly applied for the surface treatment of Aluminum, Zinc products or work pieces with thin wall in shot blasting machine. Tech Data Products Aluminium Cut Wire Shot Chemical Composition Al≥99% Mic...
-
Chinese wholesale Fast Cut Diamond Saw Blade -...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
Manufacturer of Low Carbon Steel Shot Manufactu...
Product feature High strengthen, high tenacity, long service life. Low breakage, low dust, low pollution. Low wear of the equipments, long life of accessory. Reduce dedusting system load, lengthen usage time of dedusting equipments. Technical specification Chemical Composition% C 0.10-0.20% Si 0.10-0.35% Mn 0.35-1.50% S ≤0.05% P ≤0.05% Other alloy elements Adding Cr Mo Ni B Al Cu etc. Hardness HRC42-48/48-54 Microstructure Duplex structure co...
