• product-bg
  • product-bg

Factory wholesale glass bead abrasive - Sponge media abrasives – TAA

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

All we do is always associated with our tenet " Customer first, Trust first, devoting on the food packaging and environmental protection for Bearing Steel Grit Gh50, 1.0mm Stainless Steel Cut Wire Shot, Stainless Steel Cut Wire Shot Sus430, We are going to empower people by communicating and listening, Setting an example to others and learning from experience.
Factory wholesale glass bead abrasive - Sponge media abrasives – TAA Detail:

Sponge Media abrasive are available in over 20 types,achieving profiles from 0 to 100+ micron. All procides dry, low dust, low rebound blasting.

The most commomly used is TAA-S series with aluminum oxide and TAA-G series with steel grit.

Type Profiles Abrasive Media Agent Application
TAA-S#16 ±100 micron Aluminum Oxide#16 Fast and aggressive for tough industrial coatings.
TAA-S#30 ±75 micron Aluminum Oxide#30 Removal of multilayer coatings and profile to 75 micron.
TAA-S#30 ±50 micron Aluminum Oxide#80 Effective for one or two laryers coatings and profile to50 micron.
TAA-S#30 ±25 micron Aluminum Oxide#120 Effective on light and moderate rust, producing 25 micron profile.
TAA-S#30 <25 micron Aluminum Oxide#220 For light coatings removal or to leave minor surface profiling.
TAA-G-40 +100 micron Steel Grit G40 Removal the toughest coating. For surface preparation on deteriorated surfaces and for removing elastomeric or other extremely thich coatings.

Features

1.  Sponge media abrasives manufactured with polyurethane sponge is low breakage and longer lasting and could well suppress dust pollution which normally resulted from the abrasives breakage.
2.  The sponge material absorbs the surface contaminants (mill scale, grease, etc) and thus improves the cleanness of the subject surface.
3.  Worker safety is enhanced and risks such as eye and industrial injury is reduced due to low rebound of the porous sponge.
4.  Less quality defects and low reworking
5.  High quality surface treatment of sensitive and defined area
6.  Coating lasting longer, reducing maintaining cost.
7.  Recycling
8.  Its sand blasting equipment is small in size and portable and suitable for surface cleaning of narrow area and special part.
9. This environment friendly, safe and high efficient new abrasive brings about clean, quite and visible work sites.

Operating principle

Sponge media abrasives0101

1. Dual-component sponge media abrasive are propoed to the surface using an air-doven system
2. Blasting of sponge media abrasive
* Absorb collision energy, flattened and suppress the release of loosened surface contaminants
* Expose the abrasive, remove surface contanη inants
3. When leaving the surface, the Sponge media abrasives expands back to normal size creating a vacuum which absorbs most of the dusts and contaminants

Applications

Widely used in Marine, Offshore Engineering, Military, Petrochemical Project, Aerospace & Aviation, Nuclear Power, Historic Restoration, Wall Cleaning, Building Maintenance etc.


Product detail pictures:

Factory wholesale glass bead abrasive - Sponge media abrasives – TAA detail pictures

Factory wholesale glass bead abrasive - Sponge media abrasives – TAA detail pictures


Related Product Guide:

To meet the customers' over-expected gratification , we have our robust crew to offer our best over-all support which includes marketing, income, coming up with, production, excellent managing, packing, warehousing and logistics for Factory wholesale glass bead abrasive - Sponge media abrasives – TAA , The product will supply to all over the world, such as: Monaco, Amsterdam, Belgium, As an experienced group we also accept customized order and make it same as your picture or sample specifying specification and customer design packing. The main goal of our company is to build up a satisfactory memory to all customers, and establish a long term win-win business relationship. Choose us, we always wait for your appearance!
  • We have been engaged in this industry for many years, we appreciate the work attitude and production capacity of the company, this is a reputable and professional manufacturer.
    5 Stars By Lesley from Spain - 2017.03.28 12:22
    Good quality and fast delivery, it's very nice. Some products have a little bit problem, but the supplier replaced timely, overall, we are satisfied.
    5 Stars By Prima from Guyana - 2017.06.22 12:49
    Write your message here and send it to us

    Related products

    • Wholesale Price China Buy Steel Shot - Sponge media abrasives – TAA

      Wholesale Price China Buy Steel Shot - Sponge ...

      Sponge Media abrasive are available in over 20 types,achieving profiles from 0 to 100+ micron. All procides dry, low dust, low rebound blasting. The most commomly used is TAA-S series with aluminum oxide and TAA-G series with steel grit. Type Profiles Abrasive Media Agent Application TAA-S#16 ±100 micron Aluminum Oxide#16 Fast and aggressive for tough industrial coatings. TAA-S#30 ±75 micron Aluminum Oxide#30 Removal of multilayer coatings and profile to 75 micron. TAA-S#30 ±50 micro...

    • 2018 Latest Design 304 Stainless Steel Cut Wire Shot 1.0mm - Steel Shot – TAA

      2018 Latest Design 304 Stainless Steel Cut Wire...

      Chemical Composition C 0.85-1.20% Si 0.40-1.20% Mn 0.60-1.20% S ≤0.05% P ≤0.05% Hardness HRC 40-50  Microstructure Homogeneous Tempered Martensite or Troostite Density ≥ 7.2g/cm3 External form Spherical Hollow particles<10% Size distribution Screen No. Inch Screen size S70 S110 S170 S230 S280 S330 S390 S460 S550 S660 S780 S930 6 0.132 3.35                       All pass 7 0.111 2.80                     All pass   8 0.0937 2.36                   All...

    • Reasonable price Stainless Steel Grit Sizes - Stainless steel grit – TAA

      Reasonable price Stainless Steel Grit Sizes - ...

      Features * Can be used to replace a variety of mineral sands & non-metallic abrasives,such as corundum, silicon carbide, arenaceous quartz, glass beads, etc. * Low dust emissions,improving operating environment, environmental friendly. * Can replace part of the pickling process. * Low dust emission and excellent operating environment, reducing the treatment of pickling waste. * Low comprehensive cost, the service life is 30-100 times that of non-metallic abrasive such as corundum. * ...

    • PriceList for 4.0 Mm Copper Cut Wire Shot - Zinc cut wire – TAA

      PriceList for 4.0 Mm Copper Cut Wire Shot - Zi...

      Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. Features 1. Bright colour and lustre...

    • Best-Selling Brown Fused Alumina 240# - Steel Shot – TAA

      Best-Selling Brown Fused Alumina 240# - Steel ...

      Chemical Composition C 0.85-1.20% Si 0.40-1.20% Mn 0.60-1.20% S ≤0.05% P ≤0.05% Hardness HRC 40-50  Microstructure Homogeneous Tempered Martensite or Troostite Density ≥ 7.2g/cm3 External form Spherical Hollow particles<10% Size distribution Screen No. Inch Screen size S70 S110 S170 S230 S280 S330 S390 S460 S550 S660 S780 S930 6 0.132 3.35                       All pass 7 0.111 2.80                     All pass   8 0.0937 2.36                   All...

    • Excellent quality Buy Stainless Steel Grit - Copper cut wire – TAA

      Excellent quality Buy Stainless Steel Grit - C...

      Tech Data Product Description Copper Cut Wire Shot Chemical Composition Cu: 58-99%, the rest is Zn Microhardness 110~300HV Tensile Intensity 200~500Mpa Durability 5000 Times Microstructure Deformed αorα+β Density 8.9 g/cm3 Bulk Density 5.1 g/cm3 Available sizes: 1.0mm, 1.5mm, 2.0mm, 2.5mm etc. Advantage 1. Long life time 2. Less Dust 3. Specific gravity higher than other blasting beads 4. Lower hardness than steel shot &glass b...