Factory wholesale Round Copper Cut Wire Shot - Steel Grit – TAA
Factory wholesale Round Copper Cut Wire Shot - Steel Grit – TAA Detail:
Available Hardness:
GP: HRC46-50
Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment.
GL: HRC56-60
Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications.
GH: HRC63-65
High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment.
Production Strength:
TAA adopts Arc Furnace Smelting and Double Quenching technology, which guarantee its metal abrasives’ chemical composition and high strength, high tenacity, long service life.
Tech Data: Steel Grit
|
Chemical Composition% |
C |
0.85-1.2 |
|
Si |
0.40-1.2 |
|
|
Mn |
0.60-1.2 |
|
|
S |
≤0.050 |
|
|
P |
≤0.050 |
|
|
Hardness |
GP |
HRC 46-50 |
|
GL |
HRC 53-60 |
|
|
GH |
HRC 63-65 |
|
|
Density |
≥7.4 g/cm3 |
|
|
microstructure |
Homogeneous tempered martensite or Troostite |
|
|
Appearance |
Angular |
|
Size distribution
|
Screen No. |
In |
Screen Size |
SAE J444 |
|||||||||
|
G10 |
G12 |
G14 |
G16 |
G18 |
G25 |
G40 |
G50 |
G80 |
G120 |
|||
|
6 |
0.132 |
3.35 |
|
|
|
|
|
|
|
|
|
|
|
7 |
0.111 |
2.80 |
All Pass |
|
|
|
|
|
|
|
|
|
|
8 |
0.0937 |
2.36 |
|
All Pass |
|
|
|
|
|
|
|
|
|
10 |
0.0787 |
2.00 |
≥80% |
|
All Pass |
|
|
|
|
|
|
|
|
12 |
0.0661 |
1.70 |
≥90% |
≥80% |
|
All Pass |
|
|
|
|
|
|
|
14 |
0.0555 |
1.40 |
|
≥90% |
≥80% |
|
All Pass |
|
|
|
|
|
|
16 |
0.0469 |
1.18 |
|
|
≥90% |
≥75% |
|
All Pass |
|
|
|
|
|
18 |
0.0394 |
1.00 |
|
|
|
≥85% |
≥75% |
|
All |
|
|
|
|
20 |
0.0331 |
0.850 |
|
|
|
|
|
|
|
|
|
|
|
25 |
0.0280 |
0.710 |
|
|
|
|
≥85% |
≥70% |
|
All Pass |
|
|
|
30 |
0.0232 |
0.600 |
|
|
|
|
|
|
|
|
|
|
|
35 |
0.0197 |
0.500 |
|
|
|
|
|
|
|
|
|
|
|
40 |
0.0165 |
0.425 |
|
|
|
|
|
≥80% |
≥70% |
|
All Pass |
|
|
45 |
0.0138 |
0.355 |
|
|
|
|
|
|
|
|
|
|
|
50 |
0.0117 |
0.300 |
|
|
|
|
|
|
≥80% |
≥65% |
|
All Pass |
|
80 |
0.007 |
0.180 |
|
|
|
|
|
|
|
≥75% |
≥65% |
|
|
120 |
0.0049 |
0.125 |
|
|
|
|
|
|
|
|
≥75% |
≥60% |
|
200 |
0.0029 |
0.075 |
|
|
|
|
|
|
|
|
|
≥75% |
Application
Blast cleaning: Used for blast cleaning of casting, die-casting, forging; sand removal of casting, steel plate, H type steel, steel structure.
Rust removal: Rust removal of casting, forging, steel plate, H type steel, steel structure.
Sand blasting: Sand blasting of profile steel, ship board, steel board, steel material, steel structure.
Pre-treatment: Pre-treatment of surface, steel board, profile steel, steel structure, before painting or coating.
Product detail pictures:
Related Product Guide:
We can easily normally satisfy our respected buyers with our excellent high-quality, excellent selling price and good service due to we've been far more expert and more hard-working and do it in cost-effective way for Factory wholesale Round Copper Cut Wire Shot - Steel Grit – TAA , The product will supply to all over the world, such as: Bulgaria, Somalia, Colombia, Many products fully conform to the most rigorous of international guidelines and with our first-rate delivery service you will have them delivered at any time and in any place. And because Kayo deals in the entire spectrum of protective equipment, our customers don't need to waste time shopping around.
By Elvira from Munich - 2018.06.12 16:22
We are old friends, the company's product quality has been always very good and this time the price is also very cheap.
By Andy from Germany - 2018.12.30 10:21
Related products
-
Popular Design for Fused Aluminum Oxide Powder ...
Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. Features 1. Bright colour and lustre...
-
Cheap price Continuous Diamond Cutting Blade -...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
China Supplier Small Grinding Wheel - Grinding...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
China Supplier 220# Brown Fused Alumina - Bear...
Compared with traditional steel grit made by crushing steel shot, bearing steel grit has the following Features: Raw Material Bearing steel grit is made by Chromium bearing steel which has good harden ability due to its high content of Chromium. Technology Bearing steel grit is made by crushing the forged bearing steel directly which is free from casting defects. Low wear The forged state bearing steel grit with sharp edges has higher mechanical property than traditional cast steel gr...
-
OEM Supply Hanger Shot Blasting Machine - Drum...
Advantages of drum shot blast machine Reliable Blasting Technology: Drum shot blast machines are manufactured in several different variants, types and sizes. They are compact and only have a very small footprint. Continuous throughput can be realised by linking several machines. Maintenance-friendly Layout: Regular maintenance is important for preserving the long-term value of the equipment. Large service and inspection doors provide easy access to all of the important components. As a result...
-
Newly Arrival Blast Wheel - Roller conveyor sh...
Important Advantages TAA blasting technology: Our turbines are strong power units which are highly cost-effective due to fewer wear parts and a high abrasive flfl ow. Easy to maintain The innovative filtering technology convinces through strong performances. Automation Blasting of flame cut pieces in a basket Blasting machine with adjustable passage height Bar blasting machine Blast machine for metal sheets, sections and constructions with a passage height of up...
