Free sample for Alloy Steel Grit - Stainless steel cut wire shot – TAA
Free sample for Alloy Steel Grit - Stainless steel cut wire shot – TAA Detail:
Stainless steel cut wire shot is widely used for the shot/air blasting of various types of non-ferrous metal castings, stainless steel products, aluminum parts, hardware tools, natural stone, etc, highlighting the metal color and achieving smooth, rust-free, matt fi nishing surface treatment eff ect. With good quality stainless steel wire raw material, stainless steel shot is featured with uniform particles and hardness, which guarantees its long service life and good blasting eff ect. The pellets after conditioning have low wear to the blasting machines.
Stainless steel cut wire
Stainless steel cut wire G1
Stainless steel cut wire G2
Stainless steel cut wire G3
Stainless steel cut wire-As cut, cylindrical
G1 Shape-After the treatment for cut surface’s edges, to get the edges passivated
G2 Shape-Semi conditioned
G3 Shape-Get rid of all the edges to make it become ball type, almost spherical
Technical specification
|
SUS304 |
SUS430 |
SUS410 |
|||||
|
Chemical Composition |
C |
≤0.08% |
≤0.12% |
≤0.15% |
|||
|
Si |
≤1.00% |
≤1.00% |
≤1.00% |
||||
|
Mn |
≤2.00% |
≤1.00% |
≤1.00% |
||||
|
S |
≤0.030% |
≤0.030% |
≤0.030% |
||||
|
P |
≤0.045% |
≤0.040% |
≤0.040% |
||||
|
Cr |
18-20% |
16-18% |
11.5-13.5% |
||||
|
Ni |
8-11% |
/ |
/ |
||||
|
Hardness |
HRC38-52 |
HRC25-35 |
HRC20-30 |
||||
|
External form |
Cylindrical/Spherical |
||||||
|
Microstructure |
Austenitic |
Ferrite |
Deformed martensite |
||||
|
Density |
≥7.80g/cm3 |
||||||
Advantages
Produces with very bright surfaces
Dust free surfaces and lower dust when blasting
Longer life than cast abrasives and carbon cut wire shot
No ferrous contamination
No hollow,splits or twins
Available “as cut” or “conditioned”
Available sizes: 0.3mm,0.4mm,0.5mm,0.6mm,0.8mm,1.0mm,1.2mm,1.4mm, 1.5mm
Packing: 25kgs/bag,40bags/wooden pallet or as request.
Product detail pictures:
Related Product Guide:
We also offer product sourcing and flight consolidation services. We have our own factory and sourcing office. We can provide you with almost every type of product related to our product range for Free sample for Alloy Steel Grit - Stainless steel cut wire shot – TAA , The product will supply to all over the world, such as: Atlanta, Ecuador, Houston, Further, we are supported by highly experienced and knowledgeable professionals, who have immense expertise in their respective domain. These professionals work in close coordination with each other to offer our clients an effective range of products.
By Fiona from San Diego - 2017.02.28 14:19
A nice supplier in this industry, after a detail and careful discussion, we reached a consensus agreement. Hope that we cooperate smoothly.
By Jenny from French - 2018.12.11 11:26
Related products
-
Hot New Products Steel Grit Gl120 - Aluminum c...
Aluminum cut wire shot also named as aluminum shot,aluminum beads, aluminum granules, aluminum pellet. It is made from superior quality aluminum wire, appearance is bright, is an ideal media for cleaning and reinforcing the surface of nonferrous metal casting parts. It’s mainly applied for the surface treatment of Aluminum, Zinc products or work pieces with thin wall in shot blasting machine. Tech Data Products Aluminium Cut Wire Shot Chemical Composition Al≥99% Microhar...
-
Factory Supply 125mm Grinding Wheel - Cutting ...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
China Cheap price Where To Buy Stainless Steel ...
Stainless steel cut wire shot is widely used for the shot/air blasting of various types of non-ferrous metal castings, stainless steel products, aluminum parts, hardware tools, natural stone, etc, highlighting the metal color and achieving smooth, rust-free, matt fi nishing surface treatment eff ect. With good quality stainless steel wire raw material, stainless steel shot is featured with uniform particles and hardness, which guarantees its long service life and good blasting eff ect. The pe...
-
High Quality Shot Blasting Machine - Steel Mil...
Steel mill tumble belt shot blast machines are used for deburring,descaling, sand removal and derusting mass parts. They are operated either as a stand-alone solution or as part of a line. In addition to the standard program, delivers this machine in several sizes and designs. The machines are equipped with the tried and tested high-performance turbines and the maintenance-friendly cartridge filter systems. Decisive Advantages of Steel mill tumble belt shot blast machines: AGTOS Blasting tech...
-
8 Year Exporter Masonry Cutting Disc - Grindin...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
High definition Copper For Shot - Aluminum cut...
Aluminum cut wire shot also named as aluminum shot,aluminum beads, aluminum granules, aluminum pellet. It is made from superior quality aluminum wire, appearance is bright, is an ideal media for cleaning and reinforcing the surface of nonferrous metal casting parts. It’s mainly applied for the surface treatment of Aluminum, Zinc products or work pieces with thin wall in shot blasting machine. Tech Data Products Aluminium Cut Wire Shot Chemical Composition Al≥99% Microhar...
