Good Quality Bearing Steel Grit Gl120 - Carbon steel cut wire shot – TAA
Good Quality Bearing Steel Grit Gl120 - Carbon steel cut wire shot – TAA Detail:
We made great improvement in material and the techniques on the basis of the traditional production process.
Utilizing high quality alloy steel wire as the substrate that higher the mechanical properties and make it more stable.
Improving the wiredrawing craft which make the internal organization more dense.
Improving the traditional passivation process that completely relying on impacting to reduce the damage during blasting, enhancing the service life.
|
Item |
Technical index |
|
|
Chemical Composition% |
C |
0.45-0.85% |
|
Si |
0.15-0.55% |
|
|
Mn |
0.30-1.30% |
|
|
S |
≤0.05% |
|
|
P |
≤0.04% |
|
|
Alloy elements |
appropriate amount |
|
|
Hardness |
HRC38-50/50-55/55-60/58-63/60-65 |
|
|
Microstructure |
Deformation pearlite |
|
|
Density |
≥ 7.6g/cm3 |
|
|
Unit weight |
4.4kg/L |
|
Main sizes we can supply: 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.7mm, 0.8mm, 1.0mm.
Application
Product detail pictures:
Related Product Guide:
Our development depends on the advanced equipment, excellent talents and continuously strengthened technology forces for Good Quality Bearing Steel Grit Gl120 - Carbon steel cut wire shot – TAA , The product will supply to all over the world, such as: Kuwait, Switzerland, Wellington, We adopt advanced production equipment and technology, and perfect testing equipment and methods to ensure our product quality. With our high-level talents, scientific management, excellent teams, and attentive service, our merchandise are favored by domestic and foreign customers. With your support, we'll build a better tomorrow!
By Abigail from Georgia - 2017.10.27 12:12
Company director has very rich management experience and strict attitude, sales staff are warm and cheerful, technical staff are professional and responsible,so we have no worry about product,a nice manufacturer.
By Darlene from panama - 2018.05.13 17:00
Related products
-
Wholesale Dealers of Cutting Disc 4inch - Grin...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
OEM/ODM Factory 0.5mm Stainless Steel Cut Wire ...
Sponge Media abrasive are available in over 20 types,achieving profiles from 0 to 100+ micron. All procides dry, low dust, low rebound blasting. The most commomly used is TAA-S series with aluminum oxide and TAA-G series with steel grit. Type Profiles Abrasive Media Agent Application TAA-S#16 ±100 micron Aluminum Oxide#16 Fast and aggressive for tough industrial coatings. TAA-S#30 ±75 micron Aluminum Oxide#30 Removal of multilayer coatings and profile to 75 micron. TAA-S#30 ±50 micro...
-
Factory Free sample Use Of Brown Fused Alumina ...
Compared with traditional steel grit made by crushing steel shot, bearing steel grit has the following Features: Raw Material Bearing steel grit is made by Chromium bearing steel which has good harden ability due to its high content of Chromium. Technology Bearing steel grit is made by crushing the forged bearing steel directly which is free from casting defects. Low wear The forged state bearing steel grit with sharp edges has higher mechanical property than traditional cast steel grit with...
-
Ordinary Discount Steel Grit G25 - Steel Grit ...
Available Hardness: GP: HRC46-50 Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment. GL: HRC56-60 Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications. GH: HRC63-65 High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment. Production Strength: TAA adopts Arc Furnace Smelting an...
-
Discount Price Sponge Jet Technology - Carbon ...
We made great improvement in material and the techniques on the basis of the traditional production process. Utilizing high quality alloy steel wire as the substrate that higher the mechanical properties and make it more stable. Improving the wiredrawing craft which make the internal organization more dense. Improving the traditional passivation process that completely relying on impacting to reduce the damage during blasting, enhancing the service life. Item Technical index Chemi...
-
Discountable price Fused Aluminum Oxides - Alu...
Aluminum cut wire shot also named as aluminum shot,aluminum beads, aluminum granules, aluminum pellet. It is made from superior quality aluminum wire, appearance is bright, is an ideal media for cleaning and reinforcing the surface of nonferrous metal casting parts. It’s mainly applied for the surface treatment of Aluminum, Zinc products or work pieces with thin wall in shot blasting machine. Tech Data Products Aluminium Cut Wire Shot Chemical Composition Al≥99% Microhar...
