Good Quality Steel Grit Gp - Zinc cut wire – TAA
Good Quality Steel Grit Gp - Zinc cut wire – TAA Detail:
Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot.
These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives.
Features
1. Bright colour and lustre
2. Compact structure
3. Little impurity and high purity
4. No premature breakdown or flaking
5. Less dust than either steel or aluminum abrasives
6. Durability: 6500 times
Technological Index
|
Product Description |
Zinc Cut Wire Shot |
|
Chemical Composition |
Zn≥99.9% |
|
Microhardness |
35~45HV |
|
Tensile Intensity |
90~120Mpa |
|
Durability |
6500 Times |
|
Microstructure |
Deformed α |
|
Density |
7.1 g/cm3 |
|
Bulk Density |
4.1g/cm3 |
|
Hardness |
As cut:38-55HV Conditioned:45-60HV |
Available sizes
1. Zinc cut wire: 1.5mm 1.8mm 2.0mm 2.5mm 3.0mm
2. Zinc Shot: 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm
Shapes: As cut(cylindrical), conditioned(rounded)
Application
It is used for removing oxidation skin, burr, eliminating surface defect, removing stress, etching, strengthen, prevention rust before painting of metal die-casting, precision casting, hardware tool, machinery manufacturing, automobile spare parts, apparatus and pump valves.
Product detail pictures:
Related Product Guide:
We thinks what buyers think, the urgency of urgency to act during the interests of a purchaser position of theory, allowing for much better high-quality, reduced processing costs, charges are more reasonable, won the new and outdated consumers the support and affirmation for Good Quality Steel Grit Gp - Zinc cut wire – TAA , The product will supply to all over the world, such as: Jeddah, Senegal, Florence, Adhering to the management tenet of "Managing Sincerely, Winning by Quality", we try our best to provide excellent products and service to our clients. We look forward to making progress together with domestic and international clients.
By Jessie from Gabon - 2018.12.05 13:53
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.
By Faithe from Qatar - 2018.06.09 12:42
Related products
-
Fast delivery Diamond Stone Cutting Blades - G...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
Factory Cheap Bearing Steel Grit Gl40 - Zinc c...
Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. Features 1. Bright colour and lustre...
-
Factory For Thinset Grinding Wheel - Cutting d...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
Popular Design for G14 Bearing Steel Grit - St...
Features * Can be used to replace a variety of mineral sands & non-metallic abrasives,such as corundum, silicon carbide, arenaceous quartz, glass beads, etc. * Low dust emissions,improving operating environment, environmental friendly. * Can replace part of the pickling process. * Low dust emission and excellent operating environment, reducing the treatment of pickling waste. * Low comprehensive cost, the service life is 30-100 times that of non-metallic abrasive such as corundum. * Can B...
-
OEM Supply 0.6mm Stainless Steel Cut Wire Shot ...
Chemical Composition C 0.85-1.20% Si 0.40-1.20% Mn 0.60-1.20% S ≤0.05% P ≤0.05% Hardness HRC 40-50 Microstructure Homogeneous Tempered Martensite or Troostite Density ≥ 7.2g/cm3 External form Spherical Hollow particles<10% Size distribution Screen No. Inch Screen size S70 S110 S170 S230 S280 S330 S390 S460 S550 S660 S780 S930 6 0.132 3.35 All pass 7 0.111 2.80 All pass 8 0.0937 2.36 All...
-
OEM manufacturer Gh120 Steel Grit - Glass bead...
Advantage ■ clean and smooth, not hurt to the mechanical precision of work piece. ■ high mechanical intensity, hardness, flexibility ■ it can be reused several times, the same effect and is not easily broken. ■ uniform size, after blasting sand around the device to maintain a uniform brightness effect, not easy to leave a watermark. ■ high purity and good quality meet the international standard. ■ stable chemistry property, not pollute the metal processed. Technical specificatio...
