High Quality for Second Hand Shot Blasting Machine - Continuous Overhead Rail Shot Blast Machines – TAA
High Quality for Second Hand Shot Blasting Machine - Continuous Overhead Rail Shot Blast Machines – TAA Detail:
Advantages of Track-passing shot blasting machine
* Reliable blasting technology: Our high performance turbine units are very reliable.
They are highly effficient due to the low number of wearing parts, maintenance-friendly design and high abrasive flow rate.
* Low maintenance: Regular maintenance helps maintain the value of the machines. Large maintenance doors provide easy access to all essential components and facilitate the rapid replacement of wearing parts.
* Innovative filter technology: The innovative filter technology has a convincing and powerful performance.
The special characteristics include the conical filter cartridges which can be replaced quickly and easily via drawer elements outside the casing. These cartridge fi lter systems can also be retrofi tted to older shot blast machines of most makes
* Robust construction: The sturdy construction uses special wear resistant steel with additional linings in areas subject to high wear. All helping to protect the owner’s investment.
There are many versions, types and sizes of catenary shot blasting machines. Their floor space is relatively small.
Because the catenary shot blasting machine is easy to integrate into the logistics system of the factory, it is widely used.
TAA Track-passing shot blasting machine are available in different sizes, including the following standard sizes:
| Technical Specifications |
HT 11-13-2-11 | HT 13-17-2-11 | HT 13-21-3-11 | HT 17-17-2-11 | HT 17-23-3-11 | HT 17-27-4-11 | HT 21-23-3-11 | HT 21-23-3-15 |
| Max. hook load (kg) | 400 | 400 | 400 | 800 | 800 | 800 | 800 | 800 |
| Alternative max. hook load (kg) |
800 | 800 | 800 | 1600 | 1600 | 1600 | 1600 | 1600 |
| Work piece diameter (mm) |
1100 | 1300 | 1300 | 1700 | 1700 | 1700 | 2100 | 2100 |
| Height of blasting zone (mm) |
1300 | 1700 | 2100 | 1700 | 2300 | 2700 | 2300 | 2300 |
| Turbine output (kW) | 2×11 | 2×11 | 3×11 | 2×11 | 3×11 | 4×11 | 3×11 | 3×15 |
| Cartridge filter | PF4-09 | PF4-12 | PF4-12 | PF4-12 | PF4-12 | PF4-20 | PF4-20P | PF4-28 |
| Suction output (m5/h) | 2600 | 4500 | 4500 | 4500 | 4500 | 7500 | 7500 | 10000 |
| Residual dust content with secondary filter (mg/m1) |
1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
Product detail pictures:
Related Product Guide:
We've been proud with the significant shopper fulfillment and wide acceptance due to our persistent pursuit of top of the range both of those on solution and repair for High Quality for Second Hand Shot Blasting Machine - Continuous Overhead Rail Shot Blast Machines – TAA , The product will supply to all over the world, such as: Italy, Brazil, Provence, If you give us a list of merchandise you are interested in, along with makes and models, we can send you quotations. Remember to email us directly. Our goal is to establish long-term and mutually profitable business relationships with domestic and overseas clients. We look forward to receiving your reply soon.
By Hazel from Swedish - 2017.08.28 16:02
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By Chloe from United States - 2017.03.07 13:42
Related products
-
Factory wholesale Glass Bead For Sand Blasting ...
Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. Features 1. Bright colour and lustre...
-
Factory Cheap Hot Glass Beads 180# - Steel Sho...
Chemical Composition C 0.85-1.20% Si 0.40-1.20% Mn 0.60-1.20% S ≤0.05% P ≤0.05% Hardness HRC 40-50 Microstructure Homogeneous Tempered Martensite or Troostite Density ≥ 7.2g/cm3 External form Spherical Hollow particles<10% Size distribution Screen No. Inch Screen size S70 S110 S170 S230 S280 S330 S390 S460 S550 S660 S780 S930 6 0.132 3.35 All pass 7 0.111 2.80 All pass 8 0.0937 2.36 All pass ≥90% 10 0.0787 2.00 All pa...
-
Factory Supply Wet Sand Blasting Machine - Bla...
Available Spare parts materials Content of Cr-12%, 20%, 25% or as request. Product Features Advanced & scientific precision casting Process and technology . High efficiency and automatic single station drying production line. Special high chromium abrasion casting iron spare parts, making up gaps in the domestic industry. Original Equipment Manufactured (OEM) parts are available. We also offer quality aftermarket parts for other brand machines.
-
Cheapest Factory 9 Inch Diamond Cutting Disc -...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
China wholesale 240# Glass Beads - Stainless s...
Stainless steel cut wire shot is widely used for the shot/air blasting of various types of non-ferrous metal castings, stainless steel products, aluminum parts, hardware tools, natural stone, etc, highlighting the metal color and achieving smooth, rust-free, matt fi nishing surface treatment eff ect. With good quality stainless steel wire raw material, stainless steel shot is featured with uniform particles and hardness, which guarantees its long service life and good blasting eff ect. The pe...
-
China Cheap price Cast Zinc Shot Blast Media -...
Advantage ■ clean and smooth, not hurt to the mechanical precision of work piece. ■ high mechanical intensity, hardness, flexibility ■ it can be reused several times, the same effect and is not easily broken. ■ uniform size, after blasting sand around the device to maintain a uniform brightness effect, not easy to leave a watermark. ■ high purity and good quality meet the international standard. ■ stable chemistry property, not pollute the metal processed. Technical specification Chemica...
