High Quality Portable Grinding Wheel - Cutting disc FS-03 series – TAA
High Quality Portable Grinding Wheel - Cutting disc FS-03 series – TAA Detail:
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diamond tools.
Advantages
Safty and environment friendly
Fast cutting and grinding,no break off,no pollution
· High efficiency
Improving efficiency of 30%-50% than traditional cutting disk
· Long service life
Using brazing technology,diamond on the surface not falling down
TAA diamond cutting disc
| Number | Picture | Specification | Safety Rotary Speed(r/min) | Application | Performance comparisons |
| FS100-03 |  |
100×1.2×16/20 | 12000 | Cutting of hard and brittle materials such as iron casting (ductile cast iron, Gray Cast iron and all kinds of iron), marble, fiber glass, ceramic tile, refractory material. Round cutter disk cut more smooth, kerf is flat. | 1. Cutting cast iron parts risers,the life of TAA is over 70 times than resin disk, efficiency increased by 100%. 2. Cutting marble area, the life of TAA is 3 times than sintered cutter disk , efficiency increased by 35%. 3. Cutting steel plate-concrete structure, the life of TAA is 100 times than resin cutting disk , efficiency is 3.5 times than resincutting disk. 4. Cutting fiber glass,the life of TAA is 100 times than resin cutter disk , efficiency increased by100%. |
| FS125-03 | 125×1.5×22.23 | 10000 | |||
| FS150-03 | 150×1.5×22.23 | 9500 | |||
| FS180-03 | 180×1.6×22.23/25.4 | 8500 | |||
| FS230-03 | 230×1.6×22.23/25.4 | 6000 | |||
| FS350-05 |  |
350×2.4X32 | 4500 | ||
| FS400-05 | 400×2.5X32 | 4000 |
Product detail pictures:
Related Product Guide:
Fast and great quotations, informed advisers to help you choose the correct product that suits all your preferences, a short creation time, responsible top quality control and different services for paying and shipping affairs for High Quality Portable Grinding Wheel - Cutting disc FS-03 series – TAA , The product will supply to all over the world, such as: Swansea, panama, Finland, Company name, is always regarding quality as company' s foundation, seeking for development via high degree of credibility , abiding by ISO quality management standard strictly, creating top-ranking company by spirit of progress-marking honesty and optimism.
By Elva from Sri Lanka - 2017.12.31 14:53
The company has a good reputation in this industry, and finally it tured out that choose them is a good choice.
By Margaret from Ethiopia - 2017.11.01 17:04
Related products
-
OEM manufacturer Stainless Steel Cut Wire Shot ...
Features * Can be used to replace a variety of mineral sands & non-metallic abrasives,such as corundum, silicon carbide, arenaceous quartz, glass beads, etc. * Low dust emissions,improving operating environment, environmental friendly. * Can replace part of the pickling process. * Low dust emission and excellent operating environment, reducing the treatment of pickling waste. * Low comprehensive cost, the service life is 30-100 times that of non-metallic abrasive such as corundum. * Can B...
-
Factory directly Sponge-Jet Blasting Media - B...
Compared with traditional steel grit made by crushing steel shot, bearing steel grit has the following Features: Raw Material Bearing steel grit is made by Chromium bearing steel which has good harden ability due to its high content of Chromium. Technology Bearing steel grit is made by crushing the forged bearing steel directly which is free from casting defects. Low wear The forged state bearing steel grit with sharp edges has higher mechanical property than traditional cast steel grit with...
-
Europe style for 100# Brown Fused Alumina - St...
Chemical Composition C 0.85-1.20% Si 0.40-1.20% Mn 0.60-1.20% S ≤0.05% P ≤0.05% Hardness HRC 40-50 Microstructure Homogeneous Tempered Martensite or Troostite Density ≥ 7.2g/cm3 External form Spherical Hollow particles<10% Size distribution Screen No. Inch Screen size S70 S110 S170 S230 S280 S330 S390 S460 S550 S660 S780 S930 6 0.132 3.35 All pass 7 0.111 2.80 All pass 8 0.0937 2.36 All...
-
Bottom price S660 Steel Shot - Stainless steel...
Features * Can be used to replace a variety of mineral sands & non-metallic abrasives,such as corundum, silicon carbide, arenaceous quartz, glass beads, etc. * Low dust emissions,improving operating environment, environmental friendly. * Can replace part of the pickling process. * Low dust emission and excellent operating environment, reducing the treatment of pickling waste. * Low comprehensive cost, the service life is 30-100 times that of non-metallic abrasive such as corundum. * Can B...
-
Well-designed Glass Bead Media Blasting Abrasiv...
Available Hardness: GP: HRC46-50 Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment. GL: HRC56-60 Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications. GH: HRC63-65 High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment. Production Strength: TAA adopts Arc Furnace Smelting an...
-
High Quality for High Pure Copper Shot - Brown...
Features Alumina oxide abrasive have high hardness and sharp angular, is widely used for both wet and dry blasting, creating the suitable profile for surface preparation. Alumina oxide abrasive is an idea blasting abrasive media for surface preparation requesting ferrous free. Alumina oxide abrasive is high efficiency blasting abrasives with sharp edges and high density. It is reusable and can be used in different types of blasting machine. Technical specification Type It...
