High reputation Gp120 Steel Grit - Glass beads – TAA
High reputation Gp120 Steel Grit - Glass beads – TAA Detail:
Advantage
■ clean and smooth, not hurt to the mechanical precision of work piece.
■ high mechanical intensity, hardness, flexibility
■ it can be reused several times, the same effect and is not easily broken.
■ uniform size, after blasting sand around the device to maintain a uniform brightness effect, not easy to leave a watermark.
■ high purity and good quality meet the international standard.
■ stable chemistry property, not pollute the metal processed.
Technical specification
|
Chemical Analysis |
Physical Properties |
||
|
SiO2 |
≥65.0% |
Bulk Density |
1.5g/cm3 |
|
Na2O |
≤14.0% |
Real Density |
2.5g/cm3 |
|
CaO |
≤8.0% |
Mohs Hardness |
6-7 |
|
MgO |
≥2.5% |
HRC hardness |
16 |
|
AL2O3 |
0.5-2.0% |
Roundness |
≥92.5% |
|
Fe2O3 |
≥0.15% |
Bubble |
≤10% |
|
Other |
2.0% |
||
Grades/Sizes of glass bead for sand blasting media
|
Type |
Mesh |
Diameter(um) |
|
30# |
20-40 |
850-425 |
|
40# |
30-40 |
600-425 |
|
60# |
40-60 |
425-250 |
|
80# |
60-100 |
250-150 |
|
100# |
70-140 |
210-105 |
|
120# |
100-140 |
150-100 |
|
150# |
100-200 |
150-70 |
|
180# |
140-200 |
105-70 |
|
220# |
140-270 |
105-50 |
|
280# |
200-325 |
70-45 |
|
320# |
<325 |
<44 |
Applications
1. used for semi-luster surface treatment of stainless steel products.
2. used for cleaning of mould such as forging dies, rubber, plastic, metal casting, extrusion & stamping dies etc.
3. to clear tensile stress of various parts, increase the fatigue life and corrosive power.
4. used for cleaning and removing the flash, burr of integrate circuit and semiconductor device.
5. used for shot peening of medical equipment, textile machinery and all kinds of hardware products etc.
6. used for cleaning and removing burr of all kinds of metal tube, non-ferrous alloy precision casting etc.
Product detail pictures:
Related Product Guide:
Innovation, excellent and reliability are the core values of our company. These principles today much more than ever form the basis of our success as an internationally active mid-size business for High reputation Gp120 Steel Grit - Glass beads – TAA , The product will supply to all over the world, such as: Doha, Bangladesh, Germany, Adhering to the management tenet of "Managing Sincerely, Winning by Quality", we try our best to provide excellent products and service to our clients. We look forward to making progress together with domestic and international clients.
By Louis from Qatar - 2017.02.18 15:54
Adhering to the business principle of mutual benefits, we have a happy and successful transaction, we think we will be the best business partner.
By Florence from Kyrgyzstan - 2018.12.14 15:26
Related products
-
Manufactur standard 1.0mm Carbon Steel Cut Wire...
Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. Features 1. Bright colour and lustre...
-
Manufactur standard Glass Bead Blasting Uses -...
Features * Can be used to replace a variety of mineral sands & non-metallic abrasives,such as corundum, silicon carbide, arenaceous quartz, glass beads, etc. * Low dust emissions,improving operating environment, environmental friendly. * Can replace part of the pickling process. * Low dust emission and excellent operating environment, reducing the treatment of pickling waste. * Low comprehensive cost, the service life is 30-100 times that of non-metallic abrasive such as corundum. * ...
-
Top Quality Aluminum Cut Wire Shot Suppliers -...
Available Hardness: GP: HRC46-50 Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment. GL: HRC56-60 Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications. GH: HRC63-65 High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment. Production Strength: TAA adopts Arc Furnace Smelting an...
-
China Manufacturer for Straight Cup Grinding Wh...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
China OEM Cutting Disc - Cutting disc FS-03 se...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
Factory Price 304 Stainless Steel Cut Wire Shot...
Chemical Composition C 0.85-1.20% Si 0.40-1.20% Mn 0.60-1.20% S ≤0.05% P ≤0.05% Hardness HRC 40-50 Microstructure Homogeneous Tempered Martensite or Troostite Density ≥ 7.2g/cm3 External form Spherical Hollow particles<10% Size distribution Screen No. Inch Screen size S70 S110 S170 S230 S280 S330 S390 S460 S550 S660 S780 S930 6 0.132 3.35 All pass 7 0.111 2.80 All pass 8 0.0937 2.36 All...
