Hot New Products Bearing Steel Grit Gh14 - Carbon steel cut wire shot – TAA
Hot New Products Bearing Steel Grit Gh14 - Carbon steel cut wire shot – TAA Detail:
We made great improvement in material and the techniques on the basis of the traditional production process.
Utilizing high quality alloy steel wire as the substrate that higher the mechanical properties and make it more stable.
Improving the wiredrawing craft which make the internal organization more dense.
Improving the traditional passivation process that completely relying on impacting to reduce the damage during blasting, enhancing the service life.
|
Item |
Technical index |
|
|
Chemical Composition% |
C |
0.45-0.85% |
|
Si |
0.15-0.55% |
|
|
Mn |
0.30-1.30% |
|
|
S |
≤0.05% |
|
|
P |
≤0.04% |
|
|
Alloy elements |
appropriate amount |
|
|
Hardness |
HRC38-50/50-55/55-60/58-63/60-65 |
|
|
Microstructure |
Deformation pearlite |
|
|
Density |
≥ 7.6g/cm3 |
|
|
Unit weight |
4.4kg/L |
|
Main sizes we can supply: 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.7mm, 0.8mm, 1.0mm.
Application
Product detail pictures:
Related Product Guide:
Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs of Hot New Products Bearing Steel Grit Gh14 - Carbon steel cut wire shot – TAA , The product will supply to all over the world, such as: Bangalore, Costa Rica, Paraguay, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Geraldine from Iceland - 2017.09.09 10:18
The company leader recept us warmly, through a meticulous and thorough discussion, we signed a purchase order. Hope to cooperate smoothly
By Geraldine from Bangladesh - 2018.06.21 17:11
Related products
-
Leading Manufacturer for Cut Off Wheel Sizes -...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
Special Design for Low Carbon Steel Shot For Pe...
Chemical Composition C 0.85-1.20% Si 0.40-1.20% Mn 0.60-1.20% S ≤0.05% P ≤0.05% Hardness HRC 40-50 Microstructure Homogeneous Tempered Martensite or Troostite Density ≥ 7.2g/cm3 External form Spherical Hollow particles<10% Size distribution Screen No. Inch Screen size S70 S110 S170 S230 S280 S330 S390 S460 S550 S660 S780 S930 6 0.132 3.35 All pass 7 0.111 2.80 All pass 8 0.0937 2.36 All pass ≥90% 10 0.0787 2.00 All pa...
-
One of Hottest for Types Of Cutting Discs - Cu...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
Factory wholesale Steel Grit Gh16 - Glass bead...
Advantage ■ clean and smooth, not hurt to the mechanical precision of work piece. ■ high mechanical intensity, hardness, flexibility ■ it can be reused several times, the same effect and is not easily broken. ■ uniform size, after blasting sand around the device to maintain a uniform brightness effect, not easy to leave a watermark. ■ high purity and good quality meet the international standard. ■ stable chemistry property, not pollute the metal processed. Technical specification Chemica...
-
Quality Inspection for Steel Shot And Grit - S...
Sponge Media abrasive are available in over 20 types,achieving profiles from 0 to 100+ micron. All procides dry, low dust, low rebound blasting. The most commomly used is TAA-S series with aluminum oxide and TAA-G series with steel grit. Type Profiles Abrasive Media Agent Application TAA-S#16 ±100 micron Aluminum Oxide#16 Fast and aggressive for tough industrial coatings. TAA-S#30 ±75 micron Aluminum Oxide#30 Removal of multilayer coatings and profile to 75 micron. TAA-S#30 ±50 micro...
-
Short Lead Time for Overhead Rail Shot-Blast Ma...
Important Advantages TAA blasting technology: Our turbines are strong power units which are highly cost-effective due to fewer wear parts and a high abrasive flfl ow. Easy to maintain The innovative filtering technology convinces through strong performances. Automation Blasting of flame cut pieces in a basket Blasting machine with adjustable passage height Bar blasting machine Blast machine for metal sheets, sections and constructions with a passage height of up...
