Hot sale Factory Concrete Protective Liner - Rubber belt Tumble Belt Shot Blast Machines – TAA
Hot sale Factory Concrete Protective Liner - Rubber belt Tumble Belt Shot Blast Machines – TAA Detail:
Advantages of AGTOS rubber belt tumble blast machines
Reliable blasting technology
Innovative filter technology
Many different variants
Automation through harmonisation with in-house transport system.
AGTOS high-performance turbines: Our turbines are solid, well-constructed pieces of machinery. Due to a smaller number of wear parts and high abrasive throughput, they operate extremely economically.
Many different variants: Because of the many different variants, it is possible to build the optimal blast machine for the intended application.
Automation: Machines can be optimally integrated with in house logistics systems. Custom solutions using special containers have already been successfully implemented.
Dual-purpose machine for mass production and individual parts.
The MGDT blast machine is character ized by a high degree of flexibility.
It is used to clean turned and milled parts after hardening. The machine’s belt has a load capacity of 400 kg for mass production parts with an individual weight of up to 15 kg. The turntable is used to clean impact-sensitive parts (e.g., armature shafts for electrical appliances). The table has a diameter of 680 mm and a load capacity of 150 kg.
Rubber belt tumble blast machines are available in the following standard sizes
| Specifications | MG 50 | MG 90 | MG 180 | MG 270 | MG 350 | MG 550 |
| Fill capacity (1) | 50 | 90 | 180 | 270 | 350 | 550 |
| Belt dimensions tp x width in mm 0x®g (ft*) | 500×700 | 600×800 | 800×900 | 800×1.350 | 1,000×1.350 | 1.200×1.200 |
| Max.single work piece weight (kg) | 10 | 10 | 15 | 25 | 25 | 25 |
| Max.weight of load(kg) | WO | 200 | 400 | 600 | 800 | xooo |
| Work piece transport | Optional | Optional | Optional | Optional | Optional | Optional |
| Abrasive conveyor system | Screw | Vibrating conveyor or screw | Vibrating conveyor or screw | Vibrating conveyor or screw |
Vibrating conveyor or screw |
Vibrating conveyor or screw |
| Turbine (number x kw) | 1×5,5 1×7,S | 1×7,S | M7,S 1×11 | 2×7,5 2×11 |
2×11 2×18,5 |
2×11 2×18,5 |
| Loader | Optional | Optional | Optional | Optional | Optional | Optional |
| Filter unit | PF 4/4 | PF 4/4 | PF 4/6 | PF 4/9 | PF 4/12 | PF 4/12 |
Product detail pictures:
Related Product Guide:
Using a full scientific good quality administration system, very good quality and superior faith, we win good standing and occupied this discipline for Hot sale Factory Concrete Protective Liner - Rubber belt Tumble Belt Shot Blast Machines – TAA , The product will supply to all over the world, such as: United Arab Emirates, Jordan, Provence, We follow superior mechanism to process these products that ensure optimum durability and reliability of the products. We follow latest effective washing and straightening processes that allow us to offer unmatched quality of products for our clients. We continually strive for perfection and all our efforts are directed towards attaining complete client satisfaction.
By Pearl Permewan from Philadelphia - 2017.09.22 11:32
The factory technical staff not only have high level of technology, their English level is also very good, this is a great help to technology communication.
By Honorio from Chile - 2018.09.29 13:24
Related products
-
Excellent quality Steel Shot S230 - Steel Grit...
Available Hardness: GP: HRC46-50 Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment. GL: HRC56-60 Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications. GH: HRC63-65 High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment. Production Strength: TAA adopts Arc Furnace Smelting an...
-
OEM/ODM Supplier S70 Steel Shot - Stainless st...
Features * Can be used to replace a variety of mineral sands & non-metallic abrasives,such as corundum, silicon carbide, arenaceous quartz, glass beads, etc. * Low dust emissions,improving operating environment, environmental friendly. * Can replace part of the pickling process. * Low dust emission and excellent operating environment, reducing the treatment of pickling waste. * Low comprehensive cost, the service life is 30-100 times that of non-metallic abrasive such as corundum. * ...
-
Hot Selling for 304 Stainless Steel Cut Wire Sh...
Chemical Composition C 0.85-1.20% Si 0.40-1.20% Mn 0.60-1.20% S ≤0.05% P ≤0.05% Hardness HRC 40-50 Microstructure Homogeneous Tempered Martensite or Troostite Density ≥ 7.2g/cm3 External form Spherical Hollow particles<10% Size distribution Screen No. Inch Screen size S70 S110 S170 S230 S280 S330 S390 S460 S550 S660 S780 S930 6 0.132 3.35 All pass 7 0.111 2.80 All pass 8 0.0937 2.36 All...
-
Wholesale Dealers of 304 0.3mm Stainless Steel ...
We made great improvement in material and the techniques on the basis of the traditional production process. Utilizing high quality alloy steel wire as the substrate that higher the mechanical properties and make it more stable. Improving the wiredrawing craft which make the internal organization more dense. Improving the traditional passivation process that completely relying on impacting to reduce the damage during blasting, enhancing the service life. Item Technical index ...
-
High Quality Gl14 Bearing Steel Grit - Steel G...
Available Hardness: GP: HRC46-50 Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment. GL: HRC56-60 Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications. GH: HRC63-65 High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment. Production Strength: TAA adopts Arc Furnace Smelting an...
-
Good Quality Dish Cup Grinding Wheel - Cutting...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
