Lowest Price for 304 0.6mm Stainless Steel Cut Wire Shot - Steel Grit – TAA
Lowest Price for 304 0.6mm Stainless Steel Cut Wire Shot - Steel Grit – TAA Detail:
Available Hardness:
GP: HRC46-50
Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment.
GL: HRC56-60
Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications.
GH: HRC63-65
High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment.
Production Strength:
TAA adopts Arc Furnace Smelting and Double Quenching technology, which guarantee its metal abrasives’ chemical composition and high strength, high tenacity, long service life.
Tech Data: Steel Grit
|
Chemical Composition% |
C |
0.85-1.2 |
|
Si |
0.40-1.2 |
|
|
Mn |
0.60-1.2 |
|
|
S |
≤0.050 |
|
|
P |
≤0.050 |
|
|
Hardness |
GP |
HRC 46-50 |
|
GL |
HRC 53-60 |
|
|
GH |
HRC 63-65 |
|
|
Density |
≥7.4 g/cm3 |
|
|
microstructure |
Homogeneous tempered martensite or Troostite |
|
|
Appearance |
Angular |
|
Size distribution
|
Screen No. |
In |
Screen Size |
SAE J444 |
|||||||||
|
G10 |
G12 |
G14 |
G16 |
G18 |
G25 |
G40 |
G50 |
G80 |
G120 |
|||
|
6 |
0.132 |
3.35 |
|
|
|
|
|
|
|
|
|
|
|
7 |
0.111 |
2.80 |
All Pass |
|
|
|
|
|
|
|
|
|
|
8 |
0.0937 |
2.36 |
|
All Pass |
|
|
|
|
|
|
|
|
|
10 |
0.0787 |
2.00 |
≥80% |
|
All Pass |
|
|
|
|
|
|
|
|
12 |
0.0661 |
1.70 |
≥90% |
≥80% |
|
All Pass |
|
|
|
|
|
|
|
14 |
0.0555 |
1.40 |
|
≥90% |
≥80% |
|
All Pass |
|
|
|
|
|
|
16 |
0.0469 |
1.18 |
|
|
≥90% |
≥75% |
|
All Pass |
|
|
|
|
|
18 |
0.0394 |
1.00 |
|
|
|
≥85% |
≥75% |
|
All |
|
|
|
|
20 |
0.0331 |
0.850 |
|
|
|
|
|
|
|
|
|
|
|
25 |
0.0280 |
0.710 |
|
|
|
|
≥85% |
≥70% |
|
All Pass |
|
|
|
30 |
0.0232 |
0.600 |
|
|
|
|
|
|
|
|
|
|
|
35 |
0.0197 |
0.500 |
|
|
|
|
|
|
|
|
|
|
|
40 |
0.0165 |
0.425 |
|
|
|
|
|
≥80% |
≥70% |
|
All Pass |
|
|
45 |
0.0138 |
0.355 |
|
|
|
|
|
|
|
|
|
|
|
50 |
0.0117 |
0.300 |
|
|
|
|
|
|
≥80% |
≥65% |
|
All Pass |
|
80 |
0.007 |
0.180 |
|
|
|
|
|
|
|
≥75% |
≥65% |
|
|
120 |
0.0049 |
0.125 |
|
|
|
|
|
|
|
|
≥75% |
≥60% |
|
200 |
0.0029 |
0.075 |
|
|
|
|
|
|
|
|
|
≥75% |
Application
Blast cleaning: Used for blast cleaning of casting, die-casting, forging; sand removal of casting, steel plate, H type steel, steel structure.
Rust removal: Rust removal of casting, forging, steel plate, H type steel, steel structure.
Sand blasting: Sand blasting of profile steel, ship board, steel board, steel material, steel structure.
Pre-treatment: Pre-treatment of surface, steel board, profile steel, steel structure, before painting or coating.
Product detail pictures:
Related Product Guide:
We believe in: Innovation is our soul and spirit. High-quality is our life. Consumer need to have is our God for Lowest Price for 304 0.6mm Stainless Steel Cut Wire Shot - Steel Grit – TAA , The product will supply to all over the world, such as: UK, Uruguay, Singapore, Our well-equipped facilities and excellent quality control throughout all stages of production enable us to guarantee total customer satisfaction. If you are interested in any of our products or would like to discuss a custom order, please feel free to contact me. We are looking forward to forming successful business relationship with new clients around the world.
By Emma from Angola - 2017.08.21 14:13
Company director has very rich management experience and strict attitude, sales staff are warm and cheerful, technical staff are professional and responsible,so we have no worry about product,a nice manufacturer.
By Gail from Iran - 2018.05.13 17:00
Related products
-
Chinese wholesale Grinding Disc For Aluminum -...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
2018 Good Quality Garnet Abrasive Media - Zinc...
Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. Features 1. Bright colour and lustre...
-
OEM/ODM Factory High Carbon Steel Shot - Stain...
Features * Can be used to replace a variety of mineral sands & non-metallic abrasives,such as corundum, silicon carbide, arenaceous quartz, glass beads, etc. * Low dust emissions,improving operating environment, environmental friendly. * Can replace part of the pickling process. * Low dust emission and excellent operating environment, reducing the treatment of pickling waste. * Low comprehensive cost, the service life is 30-100 times that of non-metallic abrasive such as corundum. * Can B...
-
High definition 120 Grit Garnet Blasting Media ...
Chemical Composition C 0.85-1.20% Si 0.40-1.20% Mn 0.60-1.20% S ≤0.05% P ≤0.05% Hardness HRC 40-50 Microstructure Homogeneous Tempered Martensite or Troostite Density ≥ 7.2g/cm3 External form Spherical Hollow particles<10% Size distribution Screen No. Inch Screen size S70 S110 S170 S230 S280 S330 S390 S460 S550 S660 S780 S930 6 0.132 3.35 All pass 7 0.111 2.80 All pass 8 0.0937 2.36 All...
-
Discount wholesale Side Plate Set - Belt tumbl...
Advantages of AGTOS rubber belt tumble blast machines Reliable blasting technology Innovative filter technology Many different variants Automation through harmonisation with in-house transport system. AGTOS high-performance turbines: Our turbines are solid, well-constructed pieces of machinery. Due to a smaller number of wear parts and high abrasive throughput, they operate extremely economically. Many different variants: Because of the many different variants, it is possible to build the opt...
-
factory Outlets for Tapered Grinding Wheel - G...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
