Manufactur standard 1.0mm Carbon Steel Cut Wire - Low Carbon Steel Shot – TAA
Manufactur standard 1.0mm Carbon Steel Cut Wire - Low Carbon Steel Shot – TAA Detail:
Product feature
High strengthen, high tenacity, long service life.
Low breakage, low dust, low pollution.
Low wear of the equipments, long life of accessory.
Reduce dedusting system load, lengthen usage time of dedusting equipments.
Technical specification
Chemical Composition% |
C |
0.10-0.20% |
Si |
0.10-0.35% |
|
Mn |
0.35-1.50% |
|
S |
≤0.05% |
|
P |
≤0.05% |
|
Other alloy elements |
Adding Cr Mo Ni B Al Cu etc. |
|
Hardness |
HRC42-48/48-54 |
|
Microstructure |
Duplex structure combined Martensite and Bainite |
|
Density |
≥ 7.2g/cm3 |
|
External form |
Spherical |
Size distribution
Screen No. | Inch | Screen size | S70 | S110 | S170 | S230 | S280 | S330 | S390 | S460 | S550 | S660 | S780 | S930 |
6 | 0.132 | 3.35 | All pass | |||||||||||
7 | 0.111 | 2.80 | All pass | |||||||||||
8 | 0.0937 | 2.36 | All pass | ≥90% | ||||||||||
10 | 0.0787 | 2.00 | All pass | All pass | ≥85% | ≥97% | ||||||||
12 | 0.0661 | 1.70 | All pass | ≤5% | ≥85% | ≥97% | ||||||||
14 | 0.0555 | 1.40 | All pass | ≤5% | ≥85% | ≥97% | ||||||||
16 | 0.0469 | 1.18 | All pass | ≤5% | ≥85% | ≥97% | ||||||||
18 | 0.0394 | 1.00 | All pass | ≤5% | ≥85% | ≥96% | ||||||||
20 | 0.0331 | 0.850 | All pass | ≤10% | ≥85% | ≥96% | ||||||||
25 | 0.0280 | 0.710 | ≤10% | ≥85% | ≥96% | |||||||||
30 | 0.0232 | 0.600 | All pass | ≥85% | ≥96% | |||||||||
35 | 0.0197 | 0.500 | ≤10% | ≥97% | ||||||||||
40 | 0.0165 | 0.425 | All Pass | ≥85% | ||||||||||
45 | 0.0138 | 0.355 | ≤10% | ≥97% | ||||||||||
50 | 0.0117 | 0.300 | ≥80% | |||||||||||
80 | 0.007 | 0.180 | ≥80% | ≥90% | ||||||||||
120 | 0.0049 | 0.125 | ≥90% | |||||||||||
200 | 0.0029 | 0.075 |
Fatigue Life Test
Consumption Contrast Figure of TAA LCB steel shot, low-carbon steel shot and high-carbon steel shot.(fatigue life test of normal grades at an impacting speed ratio of 60.96m/s)
Consumption contrast-Normal grade
Through the fatigue life test we can see that: the service life of TAA LCB Steel Shot is 1.5 times longer than common low carbon steel shot, 2 times longer than high carbon steel shot.
Application
Blast cleaning: Used for blast cleaning of casting, die-casting, forging; sand removal of casting, steel plate, H type steel, steel structure.
Rust removal: Rust removal of casting, forging, steel plate, H type steel, steel structure.
Shot peening: Shot peening of gear, heat treated parts.
Sand blasting: Sand blasting of profile steel, ship board, steel board, steel material, steel structure.
Pre-treatment: Pre-treatment of surface, steel board, profile steel, steel structure, before painting or coating.
Product detail pictures:
Related Product Guide:
All we do is usually affiliated with our tenet " Buyer to start with, Belief to start with, devoting about the food packaging and environmental defense for Manufactur standard 1.0mm Carbon Steel Cut Wire - Low Carbon Steel Shot – TAA , The product will supply to all over the world, such as: Grenada, Latvia, Grenada, Customer satisfaction is our first goal. Our mission is to pursue the superlative quality, making continual progress. We sincerely welcome you to make progress hand in hand with us, and construct a prosperous future together.
By Lynn from El Salvador - 2018.09.16 11:31
This company conforms to the market requirement and joins in the market competition by its high quality product, this is an enterprise that have Chinese spirit.
By David from Turin - 2017.06.29 18:55