Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diamond tools.

Advantages

Safty and environment friendly
Fast cutting and grinding, no break off, no pollution
· High efficiency
Improving  efficiency of 30%-50% than traditional cutting disk
· Long service life
Using brazing technology, diamond on the surface not falling down

TAA diamond cutting disc

Number	Picture	Specification	Safety Rotary Speed(r/min)	Application	Performance comparisons
FS100-03		100×1.2×16/20	12000	Cutting of hard and brittle materials such as iron casting (ductile cast iron, Gray Cast iron and all kinds of iron), marble, fiber glass, ceramic tile, refractory material. Round cutter disk cut more smooth, kerf is flat.	1. Cutting cast iron parts risers,the life of TAA is over 70 times than resin disk, efficiency increased by 100%. 2. Cutting marble area, the life of TAA is 3 times than sintered cutter disk , efficiency increased by 35%. 3. Cutting steel plate-concrete structure, the life of TAA is 100 times than resin cutting disk , efficiency is 3.5 times than resincutting disk. 4. Cutting fiber glass,the life of TAA is 100 times than resin cutter disk , efficiency increased by100%.
FS125-03		125×1.5×22.23	10000
FS150-03		150×1.5×22.23	9500
FS180-03		180×1.6×22.23/25.4	8500
FS230-03		230×1.6×22.23/25.4	6000
FS350-05		350×2.4X32	4500
FS400-05		400×2.5X32	4000