New Fashion Design for Shot Peening 316 Stainless Steel - Steel Grit – TAA
New Fashion Design for Shot Peening 316 Stainless Steel - Steel Grit – TAA Detail:
Available Hardness:
GP: HRC46-50
Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment.
GL: HRC56-60
Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications.
GH: HRC63-65
High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment.
Production Strength:
TAA adopts Arc Furnace Smelting and Double Quenching technology, which guarantee its metal abrasives’ chemical composition and high strength, high tenacity, long service life.
Tech Data: Steel Grit
|
Chemical Composition% |
C |
0.85-1.2 |
|
Si |
0.40-1.2 |
|
|
Mn |
0.60-1.2 |
|
|
S |
≤0.050 |
|
|
P |
≤0.050 |
|
|
Hardness |
GP |
HRC 46-50 |
|
GL |
HRC 53-60 |
|
|
GH |
HRC 63-65 |
|
|
Density |
≥7.4 g/cm3 |
|
|
microstructure |
Homogeneous tempered martensite or Troostite |
|
|
Appearance |
Angular |
|
Size distribution
|
Screen No. |
In |
Screen Size |
SAE J444 |
|||||||||
|
G10 |
G12 |
G14 |
G16 |
G18 |
G25 |
G40 |
G50 |
G80 |
G120 |
|||
|
6 |
0.132 |
3.35 |
||||||||||
|
7 |
0.111 |
2.80 |
All Pass |
|||||||||
|
8 |
0.0937 |
2.36 |
All Pass |
|||||||||
|
10 |
0.0787 |
2.00 |
≥80% |
All Pass |
||||||||
|
12 |
0.0661 |
1.70 |
≥90% |
≥80% |
All Pass |
|||||||
|
14 |
0.0555 |
1.40 |
≥90% |
≥80% |
All Pass |
|||||||
|
16 |
0.0469 |
1.18 |
≥90% |
≥75% |
All Pass |
|||||||
|
18 |
0.0394 |
1.00 |
≥85% |
≥75% |
All |
|||||||
|
20 |
0.0331 |
0.850 |
||||||||||
|
25 |
0.0280 |
0.710 |
≥85% |
≥70% |
All Pass |
|||||||
|
30 |
0.0232 |
0.600 |
||||||||||
|
35 |
0.0197 |
0.500 |
||||||||||
|
40 |
0.0165 |
0.425 |
≥80% |
≥70% |
All Pass |
|||||||
|
45 |
0.0138 |
0.355 |
||||||||||
|
50 |
0.0117 |
0.300 |
≥80% |
≥65% |
All Pass |
|||||||
|
80 |
0.007 |
0.180 |
≥75% |
≥65% |
||||||||
|
120 |
0.0049 |
0.125 |
≥75% |
≥60% |
||||||||
|
200 |
0.0029 |
0.075 |
≥75% |
|||||||||
Application
Blast cleaning: Used for blast cleaning of casting, die-casting, forging; sand removal of casting, steel plate, H type steel, steel structure.
Rust removal: Rust removal of casting, forging, steel plate, H type steel, steel structure.
Sand blasting: Sand blasting of profile steel, ship board, steel board, steel material, steel structure.
Pre-treatment: Pre-treatment of surface, steel board, profile steel, steel structure, before painting or coating.
Product detail pictures:
Related Product Guide:
We provide fantastic energy in top quality and advancement,merchandising,gross sales and marketing and operation for New Fashion Design for Shot Peening 316 Stainless Steel - Steel Grit – TAA , The product will supply to all over the world, such as: Lahore, Nairobi, Iceland, It using the world's leading system for reliable operation, a low failure rate, it suitable for Argentina customers choice. Our company is situated within the national civilized cities, the traffic is very convenient, unique geographical and economic conditions. We pursue a people-oriented, meticulous manufacturing, brainstorm, build brilliant" business philosophy. Strict quality management, perfect service, reasonable price in Argentina is our stand on the premise of competition. If necessary, welcome to contact us by our website or phone consultation, we will be happy to serve you.
By Yannick Vergoz from Ghana - 2017.12.31 14:53
The company has a good reputation in this industry, and finally it tured out that choose them is a good choice.
By Marjorie from Southampton - 2017.09.30 16:36
Related products
-
Special Price for 60# Brown Fused Alumina - Sp...
Sponge Media abrasive are available in over 20 types,achieving profiles from 0 to 100+ micron. All procides dry, low dust, low rebound blasting. The most commomly used is TAA-S series with aluminum oxide and TAA-G series with steel grit. Type Profiles Abrasive Media Agent Application TAA-S#16 ±100 micron Aluminum Oxide#16 Fast and aggressive for tough industrial coatings. TAA-S#30 ±75 micron Aluminum Oxide#30 Removal of multilayer coatings and profile to 75 micron. TAA-S#30 ±50 micro...
-
Manufacturer of Exporters Of Brown Fused Alumin...
Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. Features 1. Bright colour and ...
-
Factory best selling Bearing Steel Grit Gl50 -...
Stainless steel cut wire shot is widely used for the shot/air blasting of various types of non-ferrous metal castings, stainless steel products, aluminum parts, hardware tools, natural stone, etc, highlighting the metal color and achieving smooth, rust-free, matt fi nishing surface treatment eff ect. With good quality stainless steel wire raw material, stainless steel shot is featured with uniform particles and hardness, which guarantees its long service life and good blasting eff ect. The pe...
-
Super Purchasing for 25kg Brown Fused Alumina -...
Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. Features 1. Bright colour and ...
-
Newly Arrival Blast Wheel - Belt tumble shot b...
Advantages of TAA rubber belt tumble blast machines Reliable blasting technology Innovative filter technology Many different variants Automation through harmonisation with in-house transport system. TAA high-performance turbines: Our turbines are solid, well-constructed pieces of machinery. Due to a smaller number of wear parts and high abrasive throughput, they operate extremely economically. Many different variants: Because of the many different variants, it is possible to build the...
-
OEM China Glass Bead Blasting Near Me - Brown ...
Features Alumina oxide abrasive have high hardness and sharp angular, is widely used for both wet and dry blasting, creating the suitable profile for surface preparation. Alumina oxide abrasive is an idea blasting abrasive media for surface preparation requesting ferrous free. Alumina oxide abrasive is high efficiency blasting abrasives with sharp edges and high density. It is reusable and can be used in different types of blasting machine. Technical specification Type Item Appearance A...
