Newly Arrival Aluminum Cut Wire 2.5mm - Glass beads – TAA
Newly Arrival Aluminum Cut Wire 2.5mm - Glass beads – TAA Detail:
Advantage
■ clean and smooth, not hurt to the mechanical precision of work piece.
■ high mechanical intensity, hardness, flexibility
■ it can be reused several times, the same effect and is not easily broken.
■ uniform size, after blasting sand around the device to maintain a uniform brightness effect, not easy to leave a watermark.
■ high purity and good quality meet the international standard.
■ stable chemistry property, not pollute the metal processed.
Technical specification
|
Chemical Analysis |
Physical Properties |
||
|
SiO2 |
≥65.0% |
Bulk Density |
1.5g/cm3 |
|
Na2O |
≤14.0% |
Real Density |
2.5g/cm3 |
|
CaO |
≤8.0% |
Mohs Hardness |
6-7 |
|
MgO |
≥2.5% |
HRC hardness |
16 |
|
AL2O3 |
0.5-2.0% |
Roundness |
≥92.5% |
|
Fe2O3 |
≥0.15% |
Bubble |
≤10% |
|
Other |
2.0% |
||
Grades/Sizes of glass bead for sand blasting media
|
Type |
Mesh |
Diameter(um) |
|
30# |
20-40 |
850-425 |
|
40# |
30-40 |
600-425 |
|
60# |
40-60 |
425-250 |
|
80# |
60-100 |
250-150 |
|
100# |
70-140 |
210-105 |
|
120# |
100-140 |
150-100 |
|
150# |
100-200 |
150-70 |
|
180# |
140-200 |
105-70 |
|
220# |
140-270 |
105-50 |
|
280# |
200-325 |
70-45 |
|
320# |
<325 |
<44 |
Applications
1. used for semi-luster surface treatment of stainless steel products.
2. used for cleaning of mould such as forging dies, rubber, plastic, metal casting, extrusion & stamping dies etc.
3. to clear tensile stress of various parts, increase the fatigue life and corrosive power.
4. used for cleaning and removing the flash, burr of integrate circuit and semiconductor device.
5. used for shot peening of medical equipment, textile machinery and all kinds of hardware products etc.
6. used for cleaning and removing burr of all kinds of metal tube, non-ferrous alloy precision casting etc.
Product detail pictures:
Related Product Guide:
To be a result of ours specialty and repair consciousness, our corporation has won a good popularity amid consumers everywhere in the environment for Newly Arrival Aluminum Cut Wire 2.5mm - Glass beads – TAA , The product will supply to all over the world, such as: Roman, Cyprus, Muscat, We are looking forward to establishing a mutually beneficial relationship with you based on our high-quality products, reasonable prices and best service. We hope that our products will bring you a pleasant experience and carry a feeling of beauty.
By Austin Helman from Bulgaria - 2018.11.22 12:28
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By Sara from Italy - 2018.12.28 15:18
Related products
-
Factory Outlets Glass Bead Sandblasting Media -...
Compared with traditional steel grit made by crushing steel shot, bearing steel grit has the following Features: Raw Material Bearing steel grit is made by Chromium bearing steel which has good harden ability due to its high content of Chromium. Technology Bearing steel grit is made by crushing the forged bearing steel directly which is free from casting defects. Low wear The forged state bearing steel grit with sharp edges has higher mechanical property than traditional cast steel gr...
-
Wholesale Dealers of Cutting Disc 4inch - Grin...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
OEM/ODM China Cutting And Grinding Discs - Gri...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
Bottom price Sand Blasting Copper Cut Wire Shot...
Chemical Composition C 0.85-1.20% Si 0.40-1.20% Mn 0.60-1.20% S ≤0.05% P ≤0.05% Hardness HRC 40-50 Microstructure Homogeneous Tempered Martensite or Troostite Density ≥ 7.2g/cm3 External form Spherical Hollow particles<10% Size distribution Screen No. Inch Screen size S70 S110 S170 S230 S280 S330 S390 S460 S550 S660 S780 S930 6 0.132 3.35 All pass 7 0.111 2.80 All pass 8 0.0937 2.36 All...
-
Best Price on Brown Fused Alumina Grit - Coppe...
Tech Data Product Description Copper Cut Wire Shot Chemical Composition Cu: 58-99%, the rest is Zn Microhardness 110~300HV Tensile Intensity 200~500Mpa Durability 5000 Times Microstructure Deformed αorα+β Density 8.9 g/cm3 Bulk Density 5.1 g/cm3 Available sizes: 1.0mm, 1.5mm, 2.0mm, 2.5mm etc. Advantage 1. Long life time 2. Less Dust 3. Specific gravity higher than other blasting beads 4. Lower hardness than steel shot &glass b...
-
Factory selling Metal Cutting Diamond Blade - ...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
