OEM China China Abrasive Materials Grit of Sand Blasting Steel Grit
We persist with the principle of “quality 1st, assistance initially, continual improvement and innovation to meet the customers” for your management and “zero defect, zero complaints” as the standard objective. To great our service, we present the products and solutions while using the very good top quality at the reasonable cost for OEM China China Abrasive Materials Grit of Sand Blasting Steel Grit, We are also constantly looking to establish relationship with new suppliers to provide innovative and smart solution to our valued customers.
We persist with the principle of “quality 1st, assistance initially, continual improvement and innovation to meet the customers” for your management and “zero defect, zero complaints” as the standard objective. To great our service, we present the products and solutions while using the very good top quality at the reasonable cost for China manufacturer,sand blasting grit, We are seeking the chances to meet all the friends from both at home and abroad for the win-win cooperation. We sincerely hope to have long-term cooperation with all of you on the bases of mutual benefit and common development.
Available Hardness:
GP: HRC46-50
Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment.
GL: HRC56-60
Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications.
GH: HRC63-65
High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment.
Production Strength:
TAA adopts Arc Furnace Smelting and Double Quenching technology, which guarantee its metal abrasives’ chemical composition and high strength, high tenacity, long service life.
Tech Data: Steel Grit
Chemical Composition% |
C |
0.85-1.2 |
Si |
0.40-1.2 |
|
Mn |
0.60-1.2 |
|
S |
≤0.050 |
|
P |
≤0.050 |
|
Hardness |
GP |
HRC 46-50 |
GL |
HRC 53-60 |
|
GH |
HRC 63-65 |
|
Density |
≥7.4 g/cm3 |
|
microstructure |
Homogeneous tempered martensite or Troostite |
|
Appearance |
Angular |
Size distribution
Screen No. |
In |
Screen Size |
SAE J444 |
|||||||||
G10 |
G12 |
G14 |
G16 |
G18 |
G25 |
G40 |
G50 |
G80 |
G120 |
|||
6 |
0.132 |
3.35 |
|
|
|
|
|
|
|
|
|
|
7 |
0.111 |
2.80 |
All Pass |
|
|
|
|
|
|
|
|
|
8 |
0.0937 |
2.36 |
|
All Pass |
|
|
|
|
|
|
|
|
10 |
0.0787 |
2.00 |
≥80% |
|
All Pass |
|
|
|
|
|
|
|
12 |
0.0661 |
1.70 |
≥90% |
≥80% |
|
All Pass |
|
|
|
|
|
|
14 |
0.0555 |
1.40 |
|
≥90% |
≥80% |
|
All Pass |
|
|
|
|
|
16 |
0.0469 |
1.18 |
|
|
≥90% |
≥75% |
|
All Pass |
|
|
|
|
18 |
0.0394 |
1.00 |
|
|
|
≥85% |
≥75% |
|
All |
|
|
|
20 |
0.0331 |
0.850 |
|
|
|
|
|
|
|
|
|
|
25 |
0.0280 |
0.710 |
|
|
|
|
≥85% |
≥70% |
|
All Pass |
|
|
30 |
0.0232 |
0.600 |
|
|
|
|
|
|
|
|
|
|
35 |
0.0197 |
0.500 |
|
|
|
|
|
|
|
|
|
|
40 |
0.0165 |
0.425 |
|
|
|
|
|
≥80% |
≥70% |
|
All Pass |
|
45 |
0.0138 |
0.355 |
|
|
|
|
|
|
|
|
|
|
50 |
0.0117 |
0.300 |
|
|
|
|
|
|
≥80% |
≥65% |
|
All Pass |
80 |
0.007 |
0.180 |
|
|
|
|
|
|
|
≥75% |
≥65% |
|
120 |
0.0049 |
0.125 |
|
|
|
|
|
|
|
|
≥75% |
≥60% |
200 |
0.0029 |
0.075 |
|
|
|
|
|
|
|
|
|
≥75% |
Application
Blast cleaning: Used for blast cleaning of casting, die-casting, forging; sand removal of casting, steel plate, H type steel, steel structure.
Rust removal: Rust removal of casting, forging, steel plate, H type steel, steel structure.
Sand blasting: Sand blasting of profile steel, ship board, steel board, steel material, steel structure.
Pre-treatment: Pre-treatment of surface, steel board, profile steel, steel structure, before painting or coating.