OEM China Diamond Blade Wet Tile Cutter - Cutting disc FS-03 series – TAA
OEM China Diamond Blade Wet Tile Cutter - Cutting disc FS-03 series – TAA Detail:
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diamond tools.
Advantages
Safty and environment friendly
Fast cutting and grinding,no break off,no pollution
· High efficiency
Improving efficiency of 30%-50% than traditional cutting disk
· Long service life
Using brazing technology,diamond on the surface not falling down
TAA diamond cutting disc
| Number | Picture | Specification | Safety Rotary Speed(r/min) | Application | Performance comparisons |
| FS100-03 |  |
100×1.2×16/20 | 12000 | Cutting of hard and brittle materials such as iron casting (ductile cast iron, Gray Cast iron and all kinds of iron), marble, fiber glass, ceramic tile, refractory material. Round cutter disk cut more smooth, kerf is flat. | 1. Cutting cast iron parts risers,the life of TAA is over 70 times than resin disk, efficiency increased by 100%. 2. Cutting marble area, the life of TAA is 3 times than sintered cutter disk , efficiency increased by 35%. 3. Cutting steel plate-concrete structure, the life of TAA is 100 times than resin cutting disk , efficiency is 3.5 times than resincutting disk. 4. Cutting fiber glass,the life of TAA is 100 times than resin cutter disk , efficiency increased by100%. |
| FS125-03 | 125×1.5×22.23 | 10000 | |||
| FS150-03 | 150×1.5×22.23 | 9500 | |||
| FS180-03 | 180×1.6×22.23/25.4 | 8500 | |||
| FS230-03 | 230×1.6×22.23/25.4 | 6000 | |||
| FS350-05 |  |
350×2.4X32 | 4500 | ||
| FS400-05 | 400×2.5X32 | 4000 |
Product detail pictures:
Related Product Guide:
As a result of ours specialty and service consciousness, our company has won a good reputation among customers all over the world for OEM China Diamond Blade Wet Tile Cutter - Cutting disc FS-03 series – TAA , The product will supply to all over the world, such as: Macedonia, Grenada, Hongkong, Our products are widely recognized and trusted by users and can meet continuously changing of economic and social needs. We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!
By Poppy from Uruguay - 2018.10.01 14:14
Good quality and fast delivery, it's very nice. Some products have a little bit problem, but the supplier replaced timely, overall, we are satisfied.
By Alice from New Delhi - 2018.09.16 11:31
Related products
-
Hot-selling Steel Shot S110 - Stainless steel ...
Features * Can be used to replace a variety of mineral sands & non-metallic abrasives,such as corundum, silicon carbide, arenaceous quartz, glass beads, etc. * Low dust emissions,improving operating environment, environmental friendly. * Can replace part of the pickling process. * Low dust emission and excellent operating environment, reducing the treatment of pickling waste. * Low comprehensive cost, the service life is 30-100 times that of non-metallic abrasive such as corundum. * Can B...
-
Good Wholesale Vendors 304 0.5mm Stainless Stee...
Available Hardness: GP: HRC46-50 Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment. GL: HRC56-60 Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications. GH: HRC63-65 High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment. Production Strength: TAA adopts Arc Furnace Smelting an...
-
Wholesale Price China 1.2mm Copper Cut Wire Sho...
Tech Data Product Description Copper Cut Wire Shot Chemical Composition Cu: 58-99%, the rest is Zn Microhardness 110~300HV Tensile Intensity 200~500Mpa Durability 5000 Times Microstructure Deformed αorα+β Density 8.9 g/cm3 Bulk Density 5.1 g/cm3 Available sizes: 1.0mm, 1.5mm, 2.0mm, 2.5mm etc. Advantage 1. Long life time 2. Less Dust 3. Specific gravity higher than other blasting beads 4. Lower hardness than steel shot &glass b...
-
Manufacturer for Tile Grinding Disc - Grinding...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
Manufactur standard Surfex Shot Blasting Machin...
As a rule, hanger-type blast machines are offered either for batch or continuous processing. However, there are many intermediate designs that are oriented towards different kinds of overhead conveyor systems. In many cases, different processes such as blasting, painting and subsequent drying can be interconnected via the overhead conveyor system. This makes it possible to tap an enormous potential for streamlining the process workflow. Additional processing variants are created by using diff...
-
Professional Design Grinder With Cutting Disc -...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
