OEM Supply Glass Bead Blasting Grit - Glass beads – TAA
OEM Supply Glass Bead Blasting Grit - Glass beads – TAA Detail:
Advantage
■ clean and smooth, not hurt to the mechanical precision of work piece.
■ high mechanical intensity, hardness, flexibility
■ it can be reused several times, the same effect and is not easily broken.
■ uniform size, after blasting sand around the device to maintain a uniform brightness effect, not easy to leave a watermark.
■ high purity and good quality meet the international standard.
■ stable chemistry property, not pollute the metal processed.
Technical specification
|
Chemical Analysis |
Physical Properties |
||
|
SiO2 |
≥65.0% |
Bulk Density |
1.5g/cm3 |
|
Na2O |
≤14.0% |
Real Density |
2.5g/cm3 |
|
CaO |
≤8.0% |
Mohs Hardness |
6-7 |
|
MgO |
≥2.5% |
HRC hardness |
16 |
|
AL2O3 |
0.5-2.0% |
Roundness |
≥92.5% |
|
Fe2O3 |
≥0.15% |
Bubble |
≤10% |
|
Other |
2.0% |
||
Grades/Sizes of glass bead for sand blasting media
|
Type |
Mesh |
Diameter(um) |
|
30# |
20-40 |
850-425 |
|
40# |
30-40 |
600-425 |
|
60# |
40-60 |
425-250 |
|
80# |
60-100 |
250-150 |
|
100# |
70-140 |
210-105 |
|
120# |
100-140 |
150-100 |
|
150# |
100-200 |
150-70 |
|
180# |
140-200 |
105-70 |
|
220# |
140-270 |
105-50 |
|
280# |
200-325 |
70-45 |
|
320# |
<325 |
<44 |
Applications
1. used for semi-luster surface treatment of stainless steel products.
2. used for cleaning of mould such as forging dies, rubber, plastic, metal casting, extrusion & stamping dies etc.
3. to clear tensile stress of various parts, increase the fatigue life and corrosive power.
4. used for cleaning and removing the flash, burr of integrate circuit and semiconductor device.
5. used for shot peening of medical equipment, textile machinery and all kinds of hardware products etc.
6. used for cleaning and removing burr of all kinds of metal tube, non-ferrous alloy precision casting etc.
Product detail pictures:
Related Product Guide:
Being supported by an highly developed and skilled IT group, we could offer you technical support on pre-sales & after-sales support for OEM Supply Glass Bead Blasting Grit - Glass beads – TAA , The product will supply to all over the world, such as: Iceland, Anguilla, Japan, Since its foundation , the company keeps living up to the belief of "honest selling , best quality , people-orientation and benefits to customers. " We're doing everything to supply our customers with best services and best solutions . We promise that we are going to be responsible all the way to the end once our services begin.
By Olive from Ukraine - 2017.10.23 10:29
The after-sale warranty service is timely and thoughtful, encounter problems can be resolved very quickly, we feel reliable and secure.
By Melissa from French - 2018.09.23 18:44
Related products
-
Ordinary Discount Steel Grit G25 - Stainless s...
Stainless steel cut wire shot is widely used for the shot/air blasting of various types of non-ferrous metal castings, stainless steel products, aluminum parts, hardware tools, natural stone, etc, highlighting the metal color and achieving smooth, rust-free, matt fi nishing surface treatment eff ect. With good quality stainless steel wire raw material, stainless steel shot is featured with uniform particles and hardness, which guarantees its long service life and good blasting eff ect. The pe...
-
Wholesale Price Blasting Glass Spherical Beads ...
Compared with traditional steel grit made by crushing steel shot, bearing steel grit has the following Features: Raw Material Bearing steel grit is made by Chromium bearing steel which has good harden ability due to its high content of Chromium. Technology Bearing steel grit is made by crushing the forged bearing steel directly which is free from casting defects. Low wear The forged state bearing steel grit with sharp edges has higher mechanical property than traditional cast steel grit with...
-
Special Design for Aluminum Cut Wire 1.0mm - S...
Available Hardness: GP: HRC46-50 Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment. GL: HRC56-60 Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications. GH: HRC63-65 High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment. Production Strength: TAA adopts Arc Furnace Smelting an...
-
Cheap PriceList for Grinding Wheel 180mm - Cut...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
High Quality for High Pure Copper Shot - Stain...
Stainless steel cut wire shot is widely used for the shot/air blasting of various types of non-ferrous metal castings, stainless steel products, aluminum parts, hardware tools, natural stone, etc, highlighting the metal color and achieving smooth, rust-free, matt fi nishing surface treatment eff ect. With good quality stainless steel wire raw material, stainless steel shot is featured with uniform particles and hardness, which guarantees its long service life and good blasting eff ect. The pe...
-
Manufacturer for Glass Beads 80# - Steel Shot ...
Chemical Composition C 0.85-1.20% Si 0.40-1.20% Mn 0.60-1.20% S ≤0.05% P ≤0.05% Hardness HRC 40-50 Microstructure Homogeneous Tempered Martensite or Troostite Density ≥ 7.2g/cm3 External form Spherical Hollow particles<10% Size distribution Screen No. Inch Screen size S70 S110 S170 S230 S280 S330 S390 S460 S550 S660 S780 S930 6 0.132 3.35 All pass 7 0.111 2.80 All pass 8 0.0937 2.36 All...
