OEM/ODM Factory Conditioned Carbon Steel Cut Wire Shot - Glass beads – TAA
OEM/ODM Factory Conditioned Carbon Steel Cut Wire Shot - Glass beads – TAA Detail:
Advantage
■ clean and smooth, not hurt to the mechanical precision of work piece.
■ high mechanical intensity, hardness, flexibility
■ it can be reused several times, the same effect and is not easily broken.
■ uniform size, after blasting sand around the device to maintain a uniform brightness effect, not easy to leave a watermark.
■ high purity and good quality meet the international standard.
■ stable chemistry property, not pollute the metal processed.
Technical specification
|
Chemical Analysis |
Physical Properties |
||
|
SiO2 |
≥65.0% |
Bulk Density |
1.5g/cm3 |
|
Na2O |
≤14.0% |
Real Density |
2.5g/cm3 |
|
CaO |
≤8.0% |
Mohs Hardness |
6-7 |
|
MgO |
≥2.5% |
HRC hardness |
16 |
|
AL2O3 |
0.5-2.0% |
Roundness |
≥92.5% |
|
Fe2O3 |
≥0.15% |
Bubble |
≤10% |
|
Other |
2.0% |
||
Grades/Sizes of glass bead for sand blasting media
|
Type |
Mesh |
Diameter(um) |
|
30# |
20-40 |
850-425 |
|
40# |
30-40 |
600-425 |
|
60# |
40-60 |
425-250 |
|
80# |
60-100 |
250-150 |
|
100# |
70-140 |
210-105 |
|
120# |
100-140 |
150-100 |
|
150# |
100-200 |
150-70 |
|
180# |
140-200 |
105-70 |
|
220# |
140-270 |
105-50 |
|
280# |
200-325 |
70-45 |
|
320# |
<325 |
<44 |
Applications
1. used for semi-luster surface treatment of stainless steel products.
2. used for cleaning of mould such as forging dies, rubber, plastic, metal casting, extrusion & stamping dies etc.
3. to clear tensile stress of various parts, increase the fatigue life and corrosive power.
4. used for cleaning and removing the flash, burr of integrate circuit and semiconductor device.
5. used for shot peening of medical equipment, textile machinery and all kinds of hardware products etc.
6. used for cleaning and removing burr of all kinds of metal tube, non-ferrous alloy precision casting etc.
Product detail pictures:
Related Product Guide:
To be the stage of realizing dreams of our employees! To build a happier, far more united and far more specialist team! To reach a mutual profit of our customers, suppliers, the society and ourselves for OEM/ODM Factory Conditioned Carbon Steel Cut Wire Shot - Glass beads – TAA , The product will supply to all over the world, such as: Maldives, Barbados, Sierra Leone, If you have any requests, pls email Us with your detailed demands, we will give you the most wholesale Competitive Price with the Super Quality and the Unbeatable First-class Service ! We can give you the most competitive prices and high quality, because we are much more PROFESSIONAL! So please do not hesitate to contact us.
By Sally from Southampton - 2017.11.01 17:04
This supplier offers high quality but low price products, it is really a nice manufacturer and business partner.
By Maggie from New York - 2018.06.12 16:22
Related products
-
Hot New Products Cut Wire Steel Shot - Bearing...
Compared with traditional steel grit made by crushing steel shot, bearing steel grit has the following Features: Raw Material Bearing steel grit is made by Chromium bearing steel which has good harden ability due to its high content of Chromium. Technology Bearing steel grit is made by crushing the forged bearing steel directly which is free from casting defects. Low wear The forged state bearing steel grit with sharp edges has higher mechanical property than traditional cast steel grit with...
-
OEM Manufacturer Glass Bead Blasting Media 80 G...
Chemical Composition C 0.85-1.20% Si 0.40-1.20% Mn 0.60-1.20% S ≤0.05% P ≤0.05% Hardness HRC 40-50 Microstructure Homogeneous Tempered Martensite or Troostite Density ≥ 7.2g/cm3 External form Spherical Hollow particles<10% Size distribution Screen No. Inch Screen size S70 S110 S170 S230 S280 S330 S390 S460 S550 S660 S780 S930 6 0.132 3.35 All pass 7 0.111 2.80 All pass 8 0.0937 2.36 All...
-
Fast delivery Glass Bead Blasting Abrasive - S...
Available Hardness: GP: HRC46-50 Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment. GL: HRC56-60 Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications. GH: HRC63-65 High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment. Production Strength: TAA adopts Arc Furnace Smelting an...
-
OEM/ODM Supplier 180mm Cutting Disc - Grinding...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
OEM/ODM Supplier S70 Steel Shot - Carbon steel...
We made great improvement in material and the techniques on the basis of the traditional production process. Utilizing high quality alloy steel wire as the substrate that higher the mechanical properties and make it more stable. Improving the wiredrawing craft which make the internal organization more dense. Improving the traditional passivation process that completely relying on impacting to reduce the damage during blasting, enhancing the service life. Item Technical index Chemi...
-
Europe style for Sponge Media Abrasives G18 - ...
Stainless steel cut wire shot is widely used for the shot/air blasting of various types of non-ferrous metal castings, stainless steel products, aluminum parts, hardware tools, natural stone, etc, highlighting the metal color and achieving smooth, rust-free, matt fi nishing surface treatment eff ect. With good quality stainless steel wire raw material, stainless steel shot is featured with uniform particles and hardness, which guarantees its long service life and good blasting eff ect. The pe...
