OEM/ODM Manufacturer 0.4mm Stainless Steel Cut Wire Shot - Copper cut wire – TAA
OEM/ODM Manufacturer 0.4mm Stainless Steel Cut Wire Shot - Copper cut wire – TAA Detail:
Tech Data
|
Product Description |
Copper Cut Wire Shot |
|
Chemical Composition |
Cu: 58-99%, the rest is Zn |
|
Microhardness |
110~300HV |
|
Tensile Intensity |
200~500Mpa |
|
Durability |
5000 Times |
|
Microstructure |
Deformed αorα+β |
|
Density |
8.9 g/cm3 |
|
Bulk Density |
5.1 g/cm3 |
Available sizes: 1.0mm, 1.5mm, 2.0mm, 2.5mm etc.
Advantage
1. Long life time
2. Less Dust
3. Specific gravity higher than other blasting beads
4. Lower hardness than steel shot &glass beads
5. Shape: Cylindrical/rounded
Application
1. for new and old steel outdoor surface cleaning, descaling, strengthen.
2. as a wear-resistant flooring aggregate, hard floor tiles can be made for the square, garages and other non-slip floor.
3. for counterweight sand, such as cement plants.
4. through after fine processing, suitable for all kinds of denim spray and spray more sophisticated use.
5. the abrasive material (sand, hard abrasive paper, sandpaper, emery cloth).
It is widely used in surface treatment such as descaling, burr removing, elimination of surface defects, internal stress relief, etching, matte, leveling, strengthening and rust prevention before applying in the metal die castings, precision castings, hardware & tools, machinery manufacturing, auto parts, instruments & meters, pumps and valves industries.
Product detail pictures:
Related Product Guide:
Our personnel are always in the spirit of "continuous improvement and excellence", and together with the top-quality good quality solutions, favorable selling price and superior after-sales providers, we try to acquire each customer's rely on for OEM/ODM Manufacturer 0.4mm Stainless Steel Cut Wire Shot - Copper cut wire – TAA , The product will supply to all over the world, such as: Oman, Qatar, Sri Lanka, Our factory insists on the principle of "Quality First, Sustainable Development", and takes "Honest Business, Mutual Benefits" as our developable goal. All members sincerely thanks for all old and new customers' support. We will keep working hard and offering you the highest-quality products and service.Thanks.
By Althea from Bangalore - 2017.04.18 16:45
It is really lucky to meet such a good supplier, this is our most satisfied cooperation, I think we will work again!
By Georgia from Nepal - 2018.06.03 10:17
Related products
-
OEM China 0.6mm Carbon Steel Cut Wire - Zinc c...
Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. Features 1. Bright colour and lustre...
-
Wholesale Dealers of Shot Peening Steel Balls -...
Compared with traditional steel grit made by crushing steel shot, bearing steel grit has the following Features: Raw Material Bearing steel grit is made by Chromium bearing steel which has good harden ability due to its high content of Chromium. Technology Bearing steel grit is made by crushing the forged bearing steel directly which is free from casting defects. Low wear The forged state bearing steel grit with sharp edges has higher mechanical property than traditional cast steel gr...
-
Hot New Products Bearing Steel Grit Gh14 - Spo...
Sponge Media abrasive are available in over 20 types,achieving profiles from 0 to 100+ micron. All procides dry, low dust, low rebound blasting. The most commomly used is TAA-S series with aluminum oxide and TAA-G series with steel grit. Type Profiles Abrasive Media Agent Application TAA-S#16 ±100 micron Aluminum Oxide#16 Fast and aggressive for tough industrial coatings. TAA-S#30 ±75 micron Aluminum Oxide#30 Removal of multilayer coatings and profile to 75 micron. TAA-S#30 ±50 micro...
-
Low price for Stainless Steel Grit G40 – ...
Chemical Composition C 0.85-1.20% Si 0.40-1.20% Mn 0.60-1.20% S ≤0.05% P ≤0.05% Hardness HRC 40-50 Microstructure Homogeneous Tempered Martensite or Troostite Density ≥ 7.2g/cm3 External form Spherical Hollow particles<10% Size distribution Screen No. Inch Screen size S70 S110 S170 S230 S280 S330 S390 S460 S550 S660 S780 S930 6 0.132 3.35 All pass 7 0.111 2.80 All pass 8 0.0937 2.36 All pass ≥90% 10 0.0787 2.00 All pa...
-
New Arrival China Proper Grit To Blast Stainles...
Features Alumina oxide abrasive have high hardness and sharp angular, is widely used for both wet and dry blasting, creating the suitable profile for surface preparation. Alumina oxide abrasive is an idea blasting abrasive media for surface preparation requesting ferrous free. Alumina oxide abrasive is high efficiency blasting abrasives with sharp edges and high density. It is reusable and can be used in different types of blasting machine. Technical specification Type Item Appearance A...
-
Factory made hot-sale Steel Grit G50 - Steel G...
Available Hardness: GP: HRC46-50 Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment. GL: HRC56-60 Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications. GH: HRC63-65 High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment. Production Strength: TAA adopts Arc Furnace Smelti...
