One of Hottest for 24# Brown Fused Alumina - Carbon steel cut wire shot – TAA
One of Hottest for 24# Brown Fused Alumina - Carbon steel cut wire shot – TAA Detail:
We made great improvement in material and the techniques on the basis of the traditional production process.
Utilizing high quality alloy steel wire as the substrate that higher the mechanical properties and make it more stable.
Improving the wiredrawing craft which make the internal organization more dense.
Improving the traditional passivation process that completely relying on impacting to reduce the damage during blasting, enhancing the service life.
|
Item |
Technical index |
|
|
Chemical Composition% |
C |
0.45-0.85% |
|
Si |
0.15-0.55% |
|
|
Mn |
0.30-1.30% |
|
|
S |
≤0.05% |
|
|
P |
≤0.04% |
|
|
Alloy elements |
appropriate amount |
|
|
Hardness |
HRC38-50/50-55/55-60/58-63/60-65 |
|
|
Microstructure |
Deformation pearlite |
|
|
Density |
≥ 7.6g/cm3 |
|
|
Unit weight |
4.4kg/L |
|
Main sizes we can supply: 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.7mm, 0.8mm, 1.0mm.
Application
Product detail pictures:
Related Product Guide:
We retain improving upon and perfecting our items and repair. At the same time, we perform actively to do research and progress for One of Hottest for 24# Brown Fused Alumina - Carbon steel cut wire shot – TAA , The product will supply to all over the world, such as: Houston, Provence, Slovakia, We have won a good reputation among overseas and domestic clients. Adhering to the management tenet of "credit oriented, customer first, high efficiency and mature services", we warmly welcome friends from all walks of life to cooperate with us.
By tobin from Boston - 2018.02.08 16:45
We feel easy to cooperate with this company, the supplier is very responsible, thanks.There will be more in-depth cooperation.
By Federico Michael Di Marco from Las Vegas - 2017.07.07 13:00
Related products
-
Best quality Bulk Grinding Wheels - Grinding w...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
OEM/ODM Manufacturer 0.4mm Stainless Steel Cut ...
Compared with traditional steel grit made by crushing steel shot, bearing steel grit has the following Features: Raw Material Bearing steel grit is made by Chromium bearing steel which has good harden ability due to its high content of Chromium. Technology Bearing steel grit is made by crushing the forged bearing steel directly which is free from casting defects. Low wear The forged state bearing steel grit with sharp edges has higher mechanical property than traditional cast steel gr...
-
Reliable Supplier Grit Steel - Zinc cut wire &...
Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. Features 1. Bright colour and lustre...
-
PriceList for Gh25 Bearing Steel Grit - Low Ca...
Product feature High strengthen, high tenacity, long service life. Low breakage, low dust, low pollution. Low wear of the equipments, long life of accessory. Reduce dedusting system load, lengthen usage time of dedusting equipments. Technical specification Chemical Composition% C 0.10-0.20% Si 0.10-0.35% Mn 0.35-1.50% S ≤0.05% P ≤0.05% Other alloy elements Adding Cr Mo Ni B Al Cu etc. Hardness HRC42-48/48-54 Microstructure Duplex structure co...
-
Popular Design for G14 Bearing Steel Grit - St...
Stainless steel cut wire shot is widely used for the shot/air blasting of various types of non-ferrous metal castings, stainless steel products, aluminum parts, hardware tools, natural stone, etc, highlighting the metal color and achieving smooth, rust-free, matt fi nishing surface treatment eff ect. With good quality stainless steel wire raw material, stainless steel shot is featured with uniform particles and hardness, which guarantees its long service life and good blasting eff ect. The pe...
-
OEM manufacturer Glass Bead Blasting Process -...
Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. Features 1. Bright colour and lustre...
