Online Exporter Types Of Cutting Disc - Grinding wheels FW-09 series – TAA
Online Exporter Types Of Cutting Disc - Grinding wheels FW-09 series – TAA Detail:
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diamond tools.
Advantages
Safty and environment friendly
Fast cutting and grinding,no break off,no pollution
· High efficiency
Improving efficiency of 30%-50% than traditional cutting disk
| Number | Picture | Specification | Safety Rotary Speed（r/min） | Application | Performance comparisons |
| FW100-09 |  |
100×16 | 12000 | Large aread grinding of iron casting (ductile cast iron, Gray Cast iron) | 1. Grinding iron casting surface, TAA is over 70 times than resin disk, efficiency increased by 100% 2. Grinding steel structure weld area, TAA is 40 times than resin disk, efficiency increased by 100%. 3. Grinding fiber glass, TAA is 40 times than resin disk, efficiency increased by 100%. 4. Grinding marble and ceramic, TAA is 3 times than sintered cutter disk , efficiency increased by 100%. |
| FW125-09 | 125×22.23 | 10000 | |||
| FW150-09 | 150×22.23 | 9500 | |||
| FW180-09 | 180×22.23 | 8500 |
· Long service life
Using brazing technology,diamond on the surface not falling down
TAA diamond Grinding wheel
Product detail pictures:
Related Product Guide:
Our company puts emphasis on the management, the introduction of talented personnel, and the construction of staff building, trying hard to improve the quality and liability consciousness of staff members. Our company successfully attained IS9001 Certification and European CE Certification of Online Exporter Types Of Cutting Disc - Grinding wheels FW-09 series – TAA , The product will supply to all over the world, such as: Morocco, Nigeria, Brisbane, You can always find the solutions you have to have in our company! Welcome to inquire us about our product and anything we know and we can help in auto spare parts. We have been looking forward to work with you for a win-win situation.
By Edith from Japan - 2018.09.21 11:44
Problems can be quickly and effectively resolved, it is worth to be trust and working together.
By Prudence from Orlando - 2017.08.28 16:02
Related products
-
Chinese Professional Bearing Steel Grit Gh18 -...
Features ■ Low Dust—The high intrinsic tenacity and a high proportion of the material itself fast the settlement rate and significantly reduce the dust emissions and dust coming from the workpiece, minimizing cleaning effort sandblasting, reducing pollution of the work area. ■ Excellent Surface Quality—It can deep into the voids and uneven parts to clean, thereby completely remove rust, soluble salts and other contaminants; surface blasting process without inserts, will not advers...
-
OEM Customized Metal Cutting Discs - Cutting d...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
Professional China Alloy Zinc Shot - Low Carbo...
Product feature High strengthen, high tenacity, long service life. Low breakage, low dust, low pollution. Low wear of the equipments, long life of accessory. Reduce dedusting system load, lengthen usage time of dedusting equipments. Technical specification Chemical Composition% C 0.10-0.20% Si 0.10-0.35% Mn 0.35-1.50% S ≤0.05% P ≤0.05% Other alloy elements Adding Cr Mo Ni B Al Cu etc. Hardness HRC42-48/48-54 Microstructure Duplex structure co...
-
Low MOQ for Steel Shot Abrasive For Surface Tre...
Features * Can be used to replace a variety of mineral sands & non-metallic abrasives,such as corundum, silicon carbide, arenaceous quartz, glass beads, etc. * Low dust emissions,improving operating environment, environmental friendly. * Can replace part of the pickling process. * Low dust emission and excellent operating environment, reducing the treatment of pickling waste. * Low comprehensive cost, the service life is 30-100 times that of non-metallic abrasive such as corundum. * Can B...
-
China Gold Supplier for Face Grinding Wheel - ...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
PriceList for Gh25 Bearing Steel Grit - Zinc c...
Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. Features 1. Bright colour and lustre...
