Rapid Delivery for Sponge Media Silver 120 Mesh - Bearing steel grit – TAA
Rapid Delivery for Sponge Media Silver 120 Mesh - Bearing steel grit – TAA Detail:
Compared with traditional steel grit made by crushing steel shot, bearing steel grit has the following Features:
Raw Material
Bearing steel grit is made by Chromium bearing steel which has good harden ability due to its high content of Chromium.
Technology
Bearing steel grit is made by crushing the forged bearing steel directly which is free from casting defects.
Low wear
The forged state bearing steel grit with sharp edges has higher mechanical property than traditional cast steel grit with ball surfaces.
Technical specification
|
Chemical Composition% |
C |
0.80-1.20 |
|
|
Si |
0.15-1.20 |
||
|
Mn |
0.30-1.20 |
||
|
Cr |
0.60-1.65 |
||
|
S |
<0.050 |
||
|
P |
<0.050 |
||
|
Hardness |
GP:46-50HRC |
GH:>60HRC |
|
|
GL:56-60HRC |
|||
|
GH:>60HRC |
|||
|
Application |
Sand blasting |
Stone cutting |
|
|
Microstructure |
Homogeneous tempered martensite |
||
|
Density |
≥7.5g/cm3 |
||
|
Appearance |
Angular |
||
Application
Sanding blasting for body section, container box body, wild electricity equipment, locomotives, steel structure, port machinery etc.
Stone cutting/granite cutting in gang saw machine
Product detail pictures:
Related Product Guide:
We have been convinced that with joint attempts, the business enterprise between us will bring us mutual benefits. We could guarantee you product or service good quality and aggressive value for Rapid Delivery for Sponge Media Silver 120 Mesh - Bearing steel grit – TAA , The product will supply to all over the world, such as: Rwanda, Mumbai, Bangkok, Nowadays our merchandise sell all over the domestic and abroad thanks for the regular and new customers support. We supply high quality product and competitive price, welcome the regular and new customers cooperate with us!
By Sahid Ruvalcaba from Pakistan - 2017.11.01 17:04
The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
By Eunice from Bangladesh - 2018.06.28 19:27
Related products
-
Wholesale Price China 1.2mm Copper Cut Wire Sho...
Stainless steel cut wire shot is widely used for the shot/air blasting of various types of non-ferrous metal castings, stainless steel products, aluminum parts, hardware tools, natural stone, etc, highlighting the metal color and achieving smooth, rust-free, matt fi nishing surface treatment eff ect. With good quality stainless steel wire raw material, stainless steel shot is featured with uniform particles and hardness, which guarantees its long service life and good blasting eff ect. The pe...
-
Factory wholesale S110 Low Carbon Steel Shot -...
Sponge Media abrasive are available in over 20 types,achieving profiles from 0 to 100+ micron. All procides dry, low dust, low rebound blasting. The most commomly used is TAA-S series with aluminum oxide and TAA-G series with steel grit. Type Profiles Abrasive Media Agent Application TAA-S#16 ±100 micron Aluminum Oxide#16 Fast and aggressive for tough industrial coatings. TAA-S#30 ±75 micron Aluminum Oxide#30 Removal of multilayer coatings and profile to 75 micron. TAA-S#30 ±50 micro...
-
Factory Free sample Carbon Steel Cut Wire 0.4mm...
Features ■ Low Dust—The high intrinsic tenacity and a high proportion of the material itself fast the settlement rate and significantly reduce the dust emissions and dust coming from the workpiece, minimizing cleaning effort sandblasting, reducing pollution of the work area. ■ Excellent Surface Quality—It can deep into the voids and uneven parts to clean, thereby completely remove rust, soluble salts and other contaminants; surface blasting process without inserts, will not advers...
-
Quality Inspection for G18 Bearing Steel Grit -...
Stainless steel cut wire shot is widely used for the shot/air blasting of various types of non-ferrous metal castings, stainless steel products, aluminum parts, hardware tools, natural stone, etc, highlighting the metal color and achieving smooth, rust-free, matt fi nishing surface treatment eff ect. With good quality stainless steel wire raw material, stainless steel shot is featured with uniform particles and hardness, which guarantees its long service life and good blasting eff ect. The pe...
-
Low price for 150mm Grinding Wheel - Cutting d...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
Factory Free sample Carbon Steel Cut Wire 0.4mm...
Sponge Media abrasive are available in over 20 types,achieving profiles from 0 to 100+ micron. All procides dry, low dust, low rebound blasting. The most commomly used is TAA-S series with aluminum oxide and TAA-G series with steel grit. Type Profiles Abrasive Media Agent Application TAA-S#16 ±100 micron Aluminum Oxide#16 Fast and aggressive for tough industrial coatings. TAA-S#30 ±75 micron Aluminum Oxide#30 Removal of multilayer coatings and profile to 75 micron. TAA-S#30 ±50 micro...
