Reasonable price Steel Shot S330 - Steel Grit – TAA
Reasonable price Steel Shot S330 - Steel Grit – TAA Detail:
Available Hardness:
GP: HRC46-50
Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment.
GL: HRC56-60
Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications.
GH: HRC63-65
High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment.
Production Strength:
TAA adopts Arc Furnace Smelting and Double Quenching technology, which guarantee its metal abrasives’ chemical composition and high strength, high tenacity, long service life.
Tech Data: Steel Grit
|
Chemical Composition% |
C |
0.85-1.2 |
|
Si |
0.40-1.2 |
|
|
Mn |
0.60-1.2 |
|
|
S |
≤0.050 |
|
|
P |
≤0.050 |
|
|
Hardness |
GP |
HRC 46-50 |
|
GL |
HRC 53-60 |
|
|
GH |
HRC 63-65 |
|
|
Density |
≥7.4 g/cm3 |
|
|
microstructure |
Homogeneous tempered martensite or Troostite |
|
|
Appearance |
Angular |
|
Size distribution
|
Screen No. |
In |
Screen Size |
SAE J444 |
|||||||||
|
G10 |
G12 |
G14 |
G16 |
G18 |
G25 |
G40 |
G50 |
G80 |
G120 |
|||
|
6 |
0.132 |
3.35 |
||||||||||
|
7 |
0.111 |
2.80 |
All Pass |
|||||||||
|
8 |
0.0937 |
2.36 |
All Pass |
|||||||||
|
10 |
0.0787 |
2.00 |
≥80% |
All Pass |
||||||||
|
12 |
0.0661 |
1.70 |
≥90% |
≥80% |
All Pass |
|||||||
|
14 |
0.0555 |
1.40 |
≥90% |
≥80% |
All Pass |
|||||||
|
16 |
0.0469 |
1.18 |
≥90% |
≥75% |
All Pass |
|||||||
|
18 |
0.0394 |
1.00 |
≥85% |
≥75% |
All |
|||||||
|
20 |
0.0331 |
0.850 |
||||||||||
|
25 |
0.0280 |
0.710 |
≥85% |
≥70% |
All Pass |
|||||||
|
30 |
0.0232 |
0.600 |
||||||||||
|
35 |
0.0197 |
0.500 |
||||||||||
|
40 |
0.0165 |
0.425 |
≥80% |
≥70% |
All Pass |
|||||||
|
45 |
0.0138 |
0.355 |
||||||||||
|
50 |
0.0117 |
0.300 |
≥80% |
≥65% |
All Pass |
|||||||
|
80 |
0.007 |
0.180 |
≥75% |
≥65% |
||||||||
|
120 |
0.0049 |
0.125 |
≥75% |
≥60% |
||||||||
|
200 |
0.0029 |
0.075 |
≥75% |
|||||||||
Application
Blast cleaning: Used for blast cleaning of casting, die-casting, forging; sand removal of casting, steel plate, H type steel, steel structure.
Rust removal: Rust removal of casting, forging, steel plate, H type steel, steel structure.
Sand blasting: Sand blasting of profile steel, ship board, steel board, steel material, steel structure.
Pre-treatment: Pre-treatment of surface, steel board, profile steel, steel structure, before painting or coating.
Product detail pictures:
Related Product Guide:
owing to good service, a variety of high quality products, competitive prices and efficient delivery, we enjoy a good reputation among our customers. We are an energetic company with wide market for Reasonable price Steel Shot S330 - Steel Grit – TAA , The product will supply to all over the world, such as: Argentina, Washington, Zambia, With the spirit of "credit first, development through innovation, sincere cooperation and joint growth", our company is striving to create a brilliant future with you, so as to become a most valuable platform for exporting our products in China!
By Stephen from Sao Paulo - 2017.05.02 18:28
Superb technology, perfect after-sales service and efficient work efficiency, we think this is our best choice.
By Edith from Burundi - 2017.11.20 15:58
Related products
-
Best Price for Thermal Conductivity Brown Fused...
Product feature High strengthen, high tenacity, long service life. Low breakage, low dust, low pollution. Low wear of the equipments, long life of accessory. Reduce dedusting system load, lengthen usage time of dedusting equipments. Technical specification Chemical Composition% C 0.10-0.20% Si 0.10-0.35% Mn 0.35-1.50% S ≤0.05% P ≤0.05% Other alloy elements Adding Cr Mo Ni B Al Cu etc. Hardness HRC42-48/48-54 Microstructure Duplex structure co...
-
18 Years Factory S550 Low Carbon Steel Shot - ...
Tech Data Product Description Copper Cut Wire Shot Chemical Composition Cu: 58-99%, the rest is Zn Microhardness 110~300HV Tensile Intensity 200~500Mpa Durability 5000 Times Microstructure Deformed αorα+β Density 8.9 g/cm3 Bulk Density 5.1 g/cm3 Available sizes: 1.0mm, 1.5mm, 2.0mm, 2.5mm etc. Advantage 1. Long life time 2. Less Dust 3. Specific gravity higher than other blasting beads 4. Lower hardness than steel shot &glass beads 5. Sh...
-
Best quality Garnet 80 Mesh Prices - Zinc cut ...
Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. Features 1. Bright colour and lustre...
-
Free sample for Casting Steel Shot S390 For San...
Stainless steel cut wire shot is widely used for the shot/air blasting of various types of non-ferrous metal castings, stainless steel products, aluminum parts, hardware tools, natural stone, etc, highlighting the metal color and achieving smooth, rust-free, matt fi nishing surface treatment eff ect. With good quality stainless steel wire raw material, stainless steel shot is featured with uniform particles and hardness, which guarantees its long service life and good blasting eff ect. The pe...
-
OEM manufacturer Gh120 Steel Grit - Bearing st...
Compared with traditional steel grit made by crushing steel shot, bearing steel grit has the following Features: Raw Material Bearing steel grit is made by Chromium bearing steel which has good harden ability due to its high content of Chromium. Technology Bearing steel grit is made by crushing the forged bearing steel directly which is free from casting defects. Low wear The forged state bearing steel grit with sharp edges has higher mechanical property than traditional cast steel grit with...
-
OEM China 0.6mm Carbon Steel Cut Wire - Steel ...
Chemical Composition C 0.85-1.20% Si 0.40-1.20% Mn 0.60-1.20% S ≤0.05% P ≤0.05% Hardness HRC 40-50 Microstructure Homogeneous Tempered Martensite or Troostite Density ≥ 7.2g/cm3 External form Spherical Hollow particles<10% Size distribution Screen No. Inch Screen size S70 S110 S170 S230 S280 S330 S390 S460 S550 S660 S780 S930 6 0.132 3.35 All pass 7 0.111 2.80 All pass 8 0.0937 2.36 All...
