Reliable Supplier Blade Blast - Continuous Overhead Rail Shot Blast Machines – TAA
Reliable Supplier Blade Blast - Continuous Overhead Rail Shot Blast Machines – TAA Detail:
Advantages of Track-passing shot blasting machine
* Reliable blasting technology: Our high performance turbine units are very reliable.
They are highly effficient due to the low number of wearing parts, maintenance-friendly design and high abrasive flow rate.
* Low maintenance: Regular maintenance helps maintain the value of the machines. Large maintenance doors provide easy access to all essential components and facilitate the rapid replacement of wearing parts.
* Innovative filter technology: The innovative filter technology has a convincing and powerful performance.
The special characteristics include the conical filter cartridges which can be replaced quickly and easily via drawer elements outside the casing. These cartridge fi lter systems can also be retrofi tted to older shot blast machines of most makes
* Robust construction: The sturdy construction uses special wear resistant steel with additional linings in areas subject to high wear. All helping to protect the owner’s investment.
There are many versions, types and sizes of catenary shot blasting machines. Their floor space is relatively small.
Because the catenary shot blasting machine is easy to integrate into the logistics system of the factory, it is widely used.
AGTOS Track-passing shot blasting machine are available in different sizes, including the following standard sizes:
| Technical Specifications |
HT 11-13-2-11 | HT 13-17-2-11 | HT 13-21-3-11 | HT 17-17-2-11 | HT 17-23-3-11 | HT 17-27-4-11 | HT 21-23-3-11 | HT 21-23-3-15 |
| Max. hook load (kg) | 400 | 400 | 400 | 800 | 800 | 800 | 800 | 800 |
| Alternative max. hook load (kg) |
800 | 800 | 800 | 1600 | 1600 | 1600 | 1600 | 1600 |
| Work piece diameter (mm) |
1100 | 1300 | 1300 | 1700 | 1700 | 1700 | 2100 | 2100 |
| Height of blasting zone (mm) |
1300 | 1700 | 2100 | 1700 | 2300 | 2700 | 2300 | 2300 |
| Turbine output (kW) | 2×11 | 2×11 | 3×11 | 2×11 | 3×11 | 4×11 | 3×11 | 3×15 |
| Cartridge filter | PF4-09 | PF4-12 | PF4-12 | PF4-12 | PF4-12 | PF4-20 | PF4-20P | PF4-28 |
| Suction output (m5/h) | 2600 | 4500 | 4500 | 4500 | 4500 | 7500 | 7500 | 10000 |
| Residual dust content with secondary filter (mg/m1) |
1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
Product detail pictures:
Related Product Guide:
We keep on with the basic principle of "quality to start with, support very first, continuous improvement and innovation to meet the customers" for your management and "zero defect, zero complaints" as the quality objective. To great our service, we offer the items with all the superior top quality at the reasonable selling price for Reliable Supplier Blade Blast - Continuous Overhead Rail Shot Blast Machines – TAA , The product will supply to all over the world, such as: Sierra Leone, Qatar, Karachi, Strict quality control is executed in each link of the whole production process.We sincerely hope to establish the friendly and mutual-beneficial cooperation with you. Based on high quality products and perfect pre-sales /after-sales service is our idea, some clients had cooperated with us for more than 5 years.
By Adelaide from Uruguay - 2018.10.01 14:14
The product manager is a very hot and professional person, we have a pleasant conversation, and finally we reached a consensus agreement.
By Klemen Hrovat from Holland - 2018.06.28 19:27
Related products
-
2018 wholesale price Industrial Grinding Wheel ...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
OEM Factory for Sandblasting Glass Beads - Low...
Product feature High strengthen, high tenacity, long service life. Low breakage, low dust, low pollution. Low wear of the equipments, long life of accessory. Reduce dedusting system load, lengthen usage time of dedusting equipments. Technical specification Chemical Composition% C 0.10-0.20% Si 0.10-0.35% Mn 0.35-1.50% S ≤0.05% P ≤0.05% Other alloy elements Adding Cr Mo Ni B Al Cu etc. Hardness HRC42-48/48-54 Microstructure Duple...
-
Factory Free sample Stainless Steel Cut Wire Sh...
Stainless steel cut wire shot is widely used for the shot/air blasting of various types of non-ferrous metal castings, stainless steel products, aluminum parts, hardware tools, natural stone, etc, highlighting the metal color and achieving smooth, rust-free, matt fi nishing surface treatment eff ect. With good quality stainless steel wire raw material, stainless steel shot is featured with uniform particles and hardness, which guarantees its long service life and good blasting eff ect. The pe...
-
Europe style for Aluminum Cut Wire - Stainless...
Stainless steel cut wire shot is widely used for the shot/air blasting of various types of non-ferrous metal castings, stainless steel products, aluminum parts, hardware tools, natural stone, etc, highlighting the metal color and achieving smooth, rust-free, matt fi nishing surface treatment eff ect. With good quality stainless steel wire raw material, stainless steel shot is featured with uniform particles and hardness, which guarantees its long service life and good blasting eff ect. The pe...
-
OEM China 1.2mm Stainless Steel Cut Wire Shot -...
Tech Data Product Description Copper Cut Wire Shot Chemical Composition Cu: 58-99%, the rest is Zn Microhardness 110~300HV Tensile Intensity 200~500Mpa Durability 5000 Times Microstructure Deformed αorα+β Density 8.9 g/cm3 Bulk Density 5.1 g/cm3 Available sizes: 1.0mm, 1.5mm, 2.0mm, 2.5mm etc. Advantage 1. Long life time 2. Less Dust 3. Specific gravity higher than other blasting beads 4. Lower hardness than steel shot &glass beads 5. Sh...
-
100% Original Dustless Blasting Glass Bead - S...
Sponge Media abrasive are available in over 20 types,achieving profiles from 0 to 100+ micron. All procides dry, low dust, low rebound blasting. The most commomly used is TAA-S series with aluminum oxide and TAA-G series with steel grit. Type Profiles Abrasive Media Agent Application TAA-S#16 ±100 micron Aluminum Oxide#16 Fast and aggressive for tough industrial coatings. TAA-S#30 ±75 micron Aluminum Oxide#30 Removal of multilayer coatings and profile to 75 micron. TAA-S#30 ±50 micro...
