Top Quality S390 High Carbon Steel Shot - Stainless steel cut wire shot – TAA
Top Quality S390 High Carbon Steel Shot - Stainless steel cut wire shot – TAA Detail:
Stainless steel cut wire shot is widely used for the shot/air blasting of various types of non-ferrous metal castings, stainless steel products, aluminum parts, hardware tools, natural stone, etc, highlighting the metal color and achieving smooth, rust-free, matt fi nishing surface treatment eff ect. With good quality stainless steel wire raw material, stainless steel shot is featured with uniform particles and hardness, which guarantees its long service life and good blasting eff ect. The pellets after conditioning have low wear to the blasting machines.
Stainless steel cut wire
Stainless steel cut wire G1
Stainless steel cut wire G2
Stainless steel cut wire G3
Stainless steel cut wire-As cut, cylindrical
G1 Shape-After the treatment for cut surface’s edges, to get the edges passivated
G2 Shape-Semi conditioned
G3 Shape-Get rid of all the edges to make it become ball type, almost spherical
Technical specification
|
SUS304 |
SUS430 |
SUS410 |
|||||
|
Chemical Composition |
C |
≤0.08% |
≤0.12% |
≤0.15% |
|||
|
Si |
≤1.00% |
≤1.00% |
≤1.00% |
||||
|
Mn |
≤2.00% |
≤1.00% |
≤1.00% |
||||
|
S |
≤0.030% |
≤0.030% |
≤0.030% |
||||
|
P |
≤0.045% |
≤0.040% |
≤0.040% |
||||
|
Cr |
18-20% |
16-18% |
11.5-13.5% |
||||
|
Ni |
8-11% |
/ |
/ |
||||
|
Hardness |
HRC38-52 |
HRC25-35 |
HRC20-30 |
||||
|
External form |
Cylindrical/Spherical |
||||||
|
Microstructure |
Austenitic |
Ferrite |
Deformed martensite |
||||
|
Density |
≥7.80g/cm3 |
||||||
Advantages
Produces with very bright surfaces
Dust free surfaces and lower dust when blasting
Longer life than cast abrasives and carbon cut wire shot
No ferrous contamination
No hollow,splits or twins
Available “as cut” or “conditioned”
Available sizes: 0.3mm,0.4mm,0.5mm,0.6mm,0.8mm,1.0mm,1.2mm,1.4mm, 1.5mm
Packing: 25kgs/bag,40bags/wooden pallet or as request.
Product detail pictures:
Related Product Guide:
Bear "Customer initially, High quality first" in mind, we do the job closely with our customers and supply them with efficient and skilled providers for Top Quality S390 High Carbon Steel Shot - Stainless steel cut wire shot – TAA , The product will supply to all over the world, such as: Paris, Korea, Russia, We warmly welcome your patronage and will serve our clients both at home and abroad with products of superior quality and excellent service geared to the trend of further development as always. We believe you will benefit from our professionalism soon.
By Yannick Vergoz from Durban - 2017.06.16 18:23
The company has a good reputation in this industry, and finally it tured out that choose them is a good choice.
By Andy from Albania - 2018.07.27 12:26
Related products
-
Hot Selling for Disc Cutting Blades - Cutting ...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
Original Factory White Fused Aluminum Oxide Use...
Features * Can be used to replace a variety of mineral sands & non-metallic abrasives,such as corundum, silicon carbide, arenaceous quartz, glass beads, etc. * Low dust emissions,improving operating environment, environmental friendly. * Can replace part of the pickling process. * Low dust emission and excellent operating environment, reducing the treatment of pickling waste. * Low comprehensive cost, the service life is 30-100 times that of non-metallic abrasive such as corundum. * Can B...
-
Top Suppliers Stainless Steel Cut Wire Shot 0.4...
Available Hardness: GP: HRC46-50 Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment. GL: HRC56-60 Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications. GH: HRC63-65 High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment. Production Strength: TAA adopts Arc Furnace Smelting an...
-
Factory Promotional Protective Liners For Blast...
Advantages of Track-passing shot blasting machine * Reliable blasting technology: Our high performance turbine units are very reliable. They are highly effficient due to the low number of wearing parts, maintenance-friendly design and high abrasive flow rate. * Low maintenance: Regular maintenance helps maintain the value of the machines. Large maintenance doors provide easy access to all essential components and facilitate the rapid replacement of wearing parts. * Innovative filter tec...
-
Personlized Products Pure Aluminium Cut Wire -...
Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. Features 1. Bright colour and lustre...
-
Super Lowest Price G80 Stainless Steel Grit - ...
Advantage ■ clean and smooth, not hurt to the mechanical precision of work piece. ■ high mechanical intensity, hardness, flexibility ■ it can be reused several times, the same effect and is not easily broken. ■ uniform size, after blasting sand around the device to maintain a uniform brightness effect, not easy to leave a watermark. ■ high purity and good quality meet the international standard. ■ stable chemistry property, not pollute the metal processed. Technical specificatio...
