Trending Products Walking Beam Shot Blast Machines - Continuous Overhead Rail Shot Blast Machines – TAA
Trending Products Walking Beam Shot Blast Machines - Continuous Overhead Rail Shot Blast Machines – TAA Detail:
Advantages of Track-passing shot blasting machine
* Reliable blasting technology: Our high performance turbine units are very reliable.
They are highly effficient due to the low number of wearing parts, maintenance-friendly design and high abrasive flow rate.
* Low maintenance: Regular maintenance helps maintain the value of the machines. Large maintenance doors provide easy access to all essential components and facilitate the rapid replacement of wearing parts.
* Innovative filter technology: The innovative filter technology has a convincing and powerful performance.
The special characteristics include the conical filter cartridges which can be replaced quickly and easily via drawer elements outside the casing. These cartridge fi lter systems can also be retrofi tted to older shot blast machines of most makes
* Robust construction: The sturdy construction uses special wear resistant steel with additional linings in areas subject to high wear. All helping to protect the owner’s investment.
There are many versions, types and sizes of catenary shot blasting machines. Their floor space is relatively small.
Because the catenary shot blasting machine is easy to integrate into the logistics system of the factory, it is widely used.
AGTOS Track-passing shot blasting machine are available in different sizes, including the following standard sizes:
| Technical Specifications |
HT 11-13-2-11 | HT 13-17-2-11 | HT 13-21-3-11 | HT 17-17-2-11 | HT 17-23-3-11 | HT 17-27-4-11 | HT 21-23-3-11 | HT 21-23-3-15 |
| Max. hook load (kg) | 400 | 400 | 400 | 800 | 800 | 800 | 800 | 800 |
| Alternative max. hook load (kg) |
800 | 800 | 800 | 1600 | 1600 | 1600 | 1600 | 1600 |
| Work piece diameter (mm) |
1100 | 1300 | 1300 | 1700 | 1700 | 1700 | 2100 | 2100 |
| Height of blasting zone (mm) |
1300 | 1700 | 2100 | 1700 | 2300 | 2700 | 2300 | 2300 |
| Turbine output (kW) | 2×11 | 2×11 | 3×11 | 2×11 | 3×11 | 4×11 | 3×11 | 3×15 |
| Cartridge filter | PF4-09 | PF4-12 | PF4-12 | PF4-12 | PF4-12 | PF4-20 | PF4-20P | PF4-28 |
| Suction output (m5/h) | 2600 | 4500 | 4500 | 4500 | 4500 | 7500 | 7500 | 10000 |
| Residual dust content with secondary filter (mg/m1) |
1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
Product detail pictures:
Related Product Guide:
Being supported by an highly developed and specialist IT team, we could give technical support on pre-sales & after-sales service for Trending Products Walking Beam Shot Blast Machines - Continuous Overhead Rail Shot Blast Machines – TAA , The product will supply to all over the world, such as: Croatia, Latvia, Italy, Our company always concentrate on the development of the international market. We've got a lot of customers in Russia , European countries, the USA, the Middle East countries and Africa countries. We always follow that quality is foundation while service is guarantee to meet all customers.
By Adela from Slovenia - 2018.12.11 14:13
This manufacturer can keep improving and perfecting products and service, it is in line with the rules of market competition, a competitive company.
By Ellen from Southampton - 2017.12.31 14:53
Related products
-
2018 wholesale price Zinc Shot Blasting Media -...
Available Hardness: GP: HRC46-50 Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment. GL: HRC56-60 Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications. GH: HRC63-65 High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment. Production Strength: TAA adopts Arc Furnace Smelti...
-
Factory selling Steel Grit G18 - Stainless ste...
Features * Can be used to replace a variety of mineral sands & non-metallic abrasives,such as corundum, silicon carbide, arenaceous quartz, glass beads, etc. * Low dust emissions,improving operating environment, environmental friendly. * Can replace part of the pickling process. * Low dust emission and excellent operating environment, reducing the treatment of pickling waste. * Low comprehensive cost, the service life is 30-100 times that of non-metallic abrasive such as corundum. * ...
-
Leading Manufacturer for Grinding Wheel For Hss...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
PriceList for Steel Grit Gp18 - Steel Shot ...
Chemical Composition C 0.85-1.20% Si 0.40-1.20% Mn 0.60-1.20% S ≤0.05% P ≤0.05% Hardness HRC 40-50 Microstructure Homogeneous Tempered Martensite or Troostite Density ≥ 7.2g/cm3 External form Spherical Hollow particles<10% Size distribution Screen No. Inch Screen size S70 S110 S170 S230 S280 S330 S390 S460 S550 S660 S780 S930 6 0.132 3.35 All pass 7 0.111 2.80 All pass 8 0.0937 2.36 All...
-
Discount Price Sponge Jet Technology - Carbon ...
We made great improvement in material and the techniques on the basis of the traditional production process. Utilizing high quality alloy steel wire as the substrate that higher the mechanical properties and make it more stable. Improving the wiredrawing craft which make the internal organization more dense. Improving the traditional passivation process that completely relying on impacting to reduce the damage during blasting, enhancing the service life. Item Technical index Chemi...
-
Cheapest Price Glass Bead Abrasive Sizes - Low...
Product feature High strengthen, high tenacity, long service life. Low breakage, low dust, low pollution. Low wear of the equipments, long life of accessory. Reduce dedusting system load, lengthen usage time of dedusting equipments. Technical specification Chemical Composition% C 0.10-0.20% Si 0.10-0.35% Mn 0.35-1.50% S ≤0.05% P ≤0.05% Other alloy elements Adding Cr Mo Ni B Al Cu etc. Hardness HRC42-48/48-54 Microstructure Duple...
