Well-designed Parkside Cutting Discs - Grinding wheels FW-07 series – TAA
Well-designed Parkside Cutting Discs - Grinding wheels FW-07 series – TAA Detail:
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diamond tools
Advantages
Safty and environment friendly
Fast cutting and grinding, no break off, no pollution
· High efficiency
|
Number |
Picture |
Specification |
Safety Rotary Speed(r/min) |
Application |
Performance comparisons |
|
FW100-07 |
|
100×2.5×16 |
12000 |
Flat grinding and deburring of iron casting(ductile cast iron, Gray Cast iron) |
1. Grinding iron casting surface, TAA is over 70 times than resin disk, efficiency increased by 100% 2. Grinding steel structure weld area, TAA is 40 times than resin disk, efficiency increased by 100%. 3. Grinding fiber glass, TAA is 40 times than resin disk, efficiency increased by 100%. 4. Grinding marble and ceramic, TAA is 3 times than sintered cutter disk , efficiency increas
|
|
FW125-07 |
125×2.5×22.23 |
10000 |
|||
|
FW150-07 |
150×3.0×22.23 |
9500 |
|||
|
FW180-07 |
180×3.0×22.23 |
8500 |
|||
|
FW100-09 |
|
100×2.5×16 |
12000 |
Large aread grinding of iron casting (ductile cast iron, Gray Cast iron) |
|
|
FW125-09 |
125×2.5×22.23 |
10000 |
|||
|
FW150-09 |
150×3.0×22.23 |
9500 |
|||
|
FW180-09 |
180×3.0×22.23 |
8500 |
Improving efficiency of 30%-50% than traditional cutting disk
·Long service life
Using brazing technology,diamond on the surface not falling down
TAA diamond Grinding wheel
Product detail pictures:
Related Product Guide:
Persisting in "High quality, Prompt Delivery, Aggressive Price", we have established long-term cooperation with clientele from both equally overseas and domestically and get new and old clients' higher comments for Well-designed Parkside Cutting Discs - Grinding wheels FW-07 series – TAA , The product will supply to all over the world, such as: The Swiss, Zambia, Cannes, If you are for any reason unsure which product to select, do not hesitate to contact us and we are going to be delighted to advise and assist you. This way we are going to be providing you with all the knowledge needed to make the best choice. Our company strictly follows "Survive by good quality, Develop by keeping good credit. " operation policy. Welcome all the clients old and new to visit our company and talk about the business. We have been looking for more and more customers to create the glorious future.
By Mabel from Turkey - 2018.02.04 14:13
This supplier stick to the principle of "Quality first, Honesty as base", it is absolutely to be trust.
By Alan from Jamaica - 2017.01.11 17:15
Related products
-
Best quality Gh16 Bearing Steel Grit - Brown F...
Features Alumina oxide abrasive have high hardness and sharp angular, is widely used for both wet and dry blasting, creating the suitable profile for surface preparation. Alumina oxide abrasive is an idea blasting abrasive media for surface preparation requesting ferrous free. Alumina oxide abrasive is high efficiency blasting abrasives with sharp edges and high density. It is reusable and can be used in different types of blasting machine. Technical specification Type Item Appearance A...
-
Factory supplied Gp40 Bearing Steel Grit - Ste...
Chemical Composition C 0.85-1.20% Si 0.40-1.20% Mn 0.60-1.20% S ≤0.05% P ≤0.05% Hardness HRC 40-50 Microstructure Homogeneous Tempered Martensite or Troostite Density ≥ 7.2g/cm3 External form Spherical Hollow particles<10% Size distribution Screen No. Inch Screen size S70 S110 S170 S230 S280 S330 S390 S460 S550 S660 S780 S930 6 0.132 3.35 All pass 7 0.111 2.80 All pass 8 0.0937 2.36 All...
-
Free sample for Carbon Steel Cut Wire 0.3mm - ...
Product feature High strengthen, high tenacity, long service life. Low breakage, low dust, low pollution. Low wear of the equipments, long life of accessory. Reduce dedusting system load, lengthen usage time of dedusting equipments. Technical specification Chemical Composition% C 0.10-0.20% Si 0.10-0.35% Mn 0.35-1.50% S ≤0.05% P ≤0.05% Other alloy elements Adding Cr Mo Ni B Al Cu etc. Hardness HRC42-48/48-54 Microstructure Duplex structure co...
-
Factory Supply Copper Cut Wire Shot - Low Carb...
Product feature High strengthen, high tenacity, long service life. Low breakage, low dust, low pollution. Low wear of the equipments, long life of accessory. Reduce dedusting system load, lengthen usage time of dedusting equipments. Technical specification Chemical Composition% C 0.10-0.20% Si 0.10-0.35% Mn 0.35-1.50% S ≤0.05% P ≤0.05% Other alloy elements Adding Cr Mo Ni B Al Cu etc. Hardness HRC42-48/48-54 Microstructure Duplex structure co...
-
Super Purchasing for 25kg Brown Fused Alumina -...
Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. Features 1. Bright colour and lustre...
-
Factory Cheap Hot Sandblasting Garnet For Sale ...
Features ■ Low Dust—The high intrinsic tenacity and a high proportion of the material itself fast the settlement rate and significantly reduce the dust emissions and dust coming from the workpiece, minimizing cleaning effort sandblasting, reducing pollution of the work area. ■ Excellent Surface Quality—It can deep into the voids and uneven parts to clean, thereby completely remove rust, soluble salts and other contaminants; surface blasting process without inserts, will not advers...
