Wholesale Stainless Steel Grit Sandblasting - Steel Grit – TAA
Wholesale Stainless Steel Grit Sandblasting - Steel Grit – TAA Detail:
Available Hardness:
GP: HRC46-50
Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment.
GL: HRC56-60
Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications.
GH: HRC63-65
High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment.
Production Strength:
TAA adopts Arc Furnace Smelting and Double Quenching technology, which guarantee its metal abrasives’ chemical composition and high strength, high tenacity, long service life.
Tech Data: Steel Grit
|
Chemical Composition% |
C |
0.85-1.2 |
|
Si |
0.40-1.2 |
|
|
Mn |
0.60-1.2 |
|
|
S |
≤0.050 |
|
|
P |
≤0.050 |
|
|
Hardness |
GP |
HRC 46-50 |
|
GL |
HRC 53-60 |
|
|
GH |
HRC 63-65 |
|
|
Density |
≥7.4 g/cm3 |
|
|
microstructure |
Homogeneous tempered martensite or Troostite |
|
|
Appearance |
Angular |
|
Size distribution
|
Screen No. |
In |
Screen Size |
SAE J444 |
|||||||||
|
G10 |
G12 |
G14 |
G16 |
G18 |
G25 |
G40 |
G50 |
G80 |
G120 |
|||
|
6 |
0.132 |
3.35 |
||||||||||
|
7 |
0.111 |
2.80 |
All Pass |
|||||||||
|
8 |
0.0937 |
2.36 |
All Pass |
|||||||||
|
10 |
0.0787 |
2.00 |
≥80% |
All Pass |
||||||||
|
12 |
0.0661 |
1.70 |
≥90% |
≥80% |
All Pass |
|||||||
|
14 |
0.0555 |
1.40 |
≥90% |
≥80% |
All Pass |
|||||||
|
16 |
0.0469 |
1.18 |
≥90% |
≥75% |
All Pass |
|||||||
|
18 |
0.0394 |
1.00 |
≥85% |
≥75% |
All |
|||||||
|
20 |
0.0331 |
0.850 |
||||||||||
|
25 |
0.0280 |
0.710 |
≥85% |
≥70% |
All Pass |
|||||||
|
30 |
0.0232 |
0.600 |
||||||||||
|
35 |
0.0197 |
0.500 |
||||||||||
|
40 |
0.0165 |
0.425 |
≥80% |
≥70% |
All Pass |
|||||||
|
45 |
0.0138 |
0.355 |
||||||||||
|
50 |
0.0117 |
0.300 |
≥80% |
≥65% |
All Pass |
|||||||
|
80 |
0.007 |
0.180 |
≥75% |
≥65% |
||||||||
|
120 |
0.0049 |
0.125 |
≥75% |
≥60% |
||||||||
|
200 |
0.0029 |
0.075 |
≥75% |
|||||||||
Application
Blast cleaning: Used for blast cleaning of casting, die-casting, forging; sand removal of casting, steel plate, H type steel, steel structure.
Rust removal: Rust removal of casting, forging, steel plate, H type steel, steel structure.
Sand blasting: Sand blasting of profile steel, ship board, steel board, steel material, steel structure.
Pre-treatment: Pre-treatment of surface, steel board, profile steel, steel structure, before painting or coating.
Product detail pictures:
Related Product Guide:
We constantly carry out our spirit of ''Innovation bringing advancement, Highly-quality guaranteeing subsistence, Administration selling advantage, Credit rating attracting buyers for Wholesale Stainless Steel Grit Sandblasting - Steel Grit – TAA , The product will supply to all over the world, such as: Vancouver, Algeria, Bangalore, They are sturdy modeling and promoting effectively all over the world. Never ever disappearing major functions within a quick time, it's a have to in your case of fantastic good quality. Guided by the principle of Prudence, Efficiency, Union and Innovation. the corporation. ake an excellent efforts to expand its international trade, raise its organization. rofit and raise its export scale. We've been confident that we've been going to have a bright prospect and to be distributed all over the world in the years to come.
By Jane from Amman - 2018.07.12 12:19
Goods just received, we are very satisfied, a very good supplier, hope to make persistent efforts to do better.
By Nora from Rio de Janeiro - 2017.09.26 12:12
Related products
-
Hot Sale for Flexible Packaging Cast Steel Shot...
Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. Features 1. Bright colour and lustre...
-
OEM manufacturer 9inch Cutting Disc - Grinding...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
factory Outlets for Tapered Grinding Wheel - G...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
New Fashion Design for Shot Peening 316 Stainle...
Features Alumina oxide abrasive have high hardness and sharp angular, is widely used for both wet and dry blasting, creating the suitable profile for surface preparation. Alumina oxide abrasive is an idea blasting abrasive media for surface preparation requesting ferrous free. Alumina oxide abrasive is high efficiency blasting abrasives with sharp edges and high density. It is reusable and can be used in different types of blasting machine. Technical specification Type Item Appearance A...
-
OEM Supply Steel Shot Beads - Glass beads R...
Advantage ■ clean and smooth, not hurt to the mechanical precision of work piece. ■ high mechanical intensity, hardness, flexibility ■ it can be reused several times, the same effect and is not easily broken. ■ uniform size, after blasting sand around the device to maintain a uniform brightness effect, not easy to leave a watermark. ■ high purity and good quality meet the international standard. ■ stable chemistry property, not pollute the metal processed. Technical specification Chemica...
-
Best quality Diamond Cutting Disc 4.5 - Cuttin...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
