100% Original Factory G14 Steel Grit - Steel Grit – TAA
100% Original Factory G14 Steel Grit - Steel Grit – TAA Detail:
Available Hardness:
GP: HRC46-50
Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment.
GL: HRC56-60
Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications.
GH: HRC63-65
High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment.
Production Strength:
TAA adopts Arc Furnace Smelting and Double Quenching technology, which guarantee its metal abrasives’ chemical composition and high strength, high tenacity, long service life.
Tech Data: Steel Grit
|
Chemical Composition% |
C |
0.85-1.2 |
|
Si |
0.40-1.2 |
|
|
Mn |
0.60-1.2 |
|
|
S |
≤0.050 |
|
|
P |
≤0.050 |
|
|
Hardness |
GP |
HRC 46-50 |
|
GL |
HRC 53-60 |
|
|
GH |
HRC 63-65 |
|
|
Density |
≥7.4 g/cm3 |
|
|
microstructure |
Homogeneous tempered martensite or Troostite |
|
|
Appearance |
Angular |
|
Size distribution
|
Screen No. |
In |
Screen Size |
SAE J444 |
|||||||||
|
G10 |
G12 |
G14 |
G16 |
G18 |
G25 |
G40 |
G50 |
G80 |
G120 |
|||
|
6 |
0.132 |
3.35 |
||||||||||
|
7 |
0.111 |
2.80 |
All Pass |
|||||||||
|
8 |
0.0937 |
2.36 |
All Pass |
|||||||||
|
10 |
0.0787 |
2.00 |
≥80% |
All Pass |
||||||||
|
12 |
0.0661 |
1.70 |
≥90% |
≥80% |
All Pass |
|||||||
|
14 |
0.0555 |
1.40 |
≥90% |
≥80% |
All Pass |
|||||||
|
16 |
0.0469 |
1.18 |
≥90% |
≥75% |
All Pass |
|||||||
|
18 |
0.0394 |
1.00 |
≥85% |
≥75% |
All |
|||||||
|
20 |
0.0331 |
0.850 |
||||||||||
|
25 |
0.0280 |
0.710 |
≥85% |
≥70% |
All Pass |
|||||||
|
30 |
0.0232 |
0.600 |
||||||||||
|
35 |
0.0197 |
0.500 |
||||||||||
|
40 |
0.0165 |
0.425 |
≥80% |
≥70% |
All Pass |
|||||||
|
45 |
0.0138 |
0.355 |
||||||||||
|
50 |
0.0117 |
0.300 |
≥80% |
≥65% |
All Pass |
|||||||
|
80 |
0.007 |
0.180 |
≥75% |
≥65% |
||||||||
|
120 |
0.0049 |
0.125 |
≥75% |
≥60% |
||||||||
|
200 |
0.0029 |
0.075 |
≥75% |
|||||||||
Application
Blast cleaning: Used for blast cleaning of casting, die-casting, forging; sand removal of casting, steel plate, H type steel, steel structure.
Rust removal: Rust removal of casting, forging, steel plate, H type steel, steel structure.
Sand blasting: Sand blasting of profile steel, ship board, steel board, steel material, steel structure.
Pre-treatment: Pre-treatment of surface, steel board, profile steel, steel structure, before painting or coating.
Product detail pictures:
Related Product Guide:
Our intention is usually to satisfy our buyers by offering golden provider, great rate and good quality for 100% Original Factory G14 Steel Grit - Steel Grit – TAA , The product will supply to all over the world, such as: Greenland, Barbados, Mauritius, We have got constantly insisted on the evolution of solutions, spent good funds and human resource in technological upgrading, and facilitate production improvement, meeting the wants of prospects from all countries and regions.
By Penelope from Kuwait - 2018.06.09 12:42
The company can keep up with the changes in this industry market, product updates fast and the price is cheap, this is our second cooperation, it's good.
By Miriam from Orlando - 2017.09.22 11:32
Related products
-
Special Design for Glass Bead Media For Blastin...
Features ■ Low Dust—The high intrinsic tenacity and a high proportion of the material itself fast the settlement rate and significantly reduce the dust emissions and dust coming from the workpiece, minimizing cleaning effort sandblasting, reducing pollution of the work area. ■ Excellent Surface Quality—It can deep into the voids and uneven parts to clean, thereby completely remove rust, soluble salts and other contaminants; surface blasting process without inserts, will not a...
-
2018 High quality Steel Shots And Grits - Stai...
Stainless steel cut wire shot is widely used for the shot/air blasting of various types of non-ferrous metal castings, stainless steel products, aluminum parts, hardware tools, natural stone, etc, highlighting the metal color and achieving smooth, rust-free, matt fi nishing surface treatment eff ect. With good quality stainless steel wire raw material, stainless steel shot is featured with uniform particles and hardness, which guarantees its long service life and good blasting eff ect. The pe...
-
Chinese wholesale Glass Beads 120# - Aluminum ...
Aluminum cut wire shot also named as aluminum shot,aluminum beads, aluminum granules, aluminum pellet. It is made from superior quality aluminum wire, appearance is bright, is an ideal media for cleaning and reinforcing the surface of nonferrous metal casting parts. It’s mainly applied for the surface treatment of Aluminum, Zinc products or work pieces with thin wall in shot blasting machine. Tech Data Products Aluminium Cut Wire Shot Chemical Composition Al≥99% Mic...
-
100% Original Factory Stainless Steel Shot For ...
Sponge Media abrasive are available in over 20 types,achieving profiles from 0 to 100+ micron. All procides dry, low dust, low rebound blasting. The most commomly used is TAA-S series with aluminum oxide and TAA-G series with steel grit. Type Profiles Abrasive Media Agent Application TAA-S#16 ±100 micron Aluminum Oxide#16 Fast and aggressive for tough industrial coatings. TAA-S#30 ±75 micron Aluminum Oxide#30 Removal of multilayer coatings and profile to 75 micron. TAA-S#30 ±50 micro...
-
OEM Customized Diamond Asphalt Cutting Blade -...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
Super Purchasing for 25kg Brown Fused Alumina -...
Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. Features 1. Bright colour and lustre...
