2018 Good Quality Grinding Disc For Drill - Cutting disc FS-05 series – TAA
2018 Good Quality Grinding Disc For Drill - Cutting disc FS-05 series – TAA Detail:
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diamond tools.
Advantages
Safty and environment friendly
Fast cutting and grinding, no break off, no pollution
· High efficiency
Improving efficiency of 30%-50% than traditional cutting disk
· Long service life
Using brazing technology, diamond on the surface not falling down
TAA diamond cutting disc
| Number | Picture | Specification | Safety Rotary Speed(r/min) | Application | Performance comparisons |
| FS100-03 |  |
100×1.2×16/20 | 12000 | Cutting of hard and brittle materials such as iron casting (ductile cast iron, Gray Cast iron and all kinds of iron), marble, fiber glass, ceramic tile, refractory material. Round cutter disk cut more smooth, kerf is flat. | 1. Cutting cast iron parts risers,the life of TAA is over 70 times than resin disk, efficiency increased by 100%. 2. Cutting marble area, the life of TAA is 3 times than sintered cutter disk , efficiency increased by 35%. 3. Cutting steel plate-concrete structure, the life of TAA is 100 times than resin cutting disk , efficiency is 3.5 times than resincutting disk. 4. Cutting fiber glass,the life of TAA is 100 times than resin cutter disk , efficiency increased by100%. |
| FS125-03 | 125×1.5×22.23 | 10000 | |||
| FS150-03 | 150×1.5×22.23 | 9500 | |||
| FS180-03 | 180×1.6×22.23/25.4 | 8500 | |||
| FS230-03 | 230×1.6×22.23/25.4 | 6000 | |||
| FS350-05 |  |
350×2.4X32 | 4500 | ||
| FS400-05 | 400×2.5X32 | 4000 |
Product detail pictures:
Related Product Guide:
We stay with our company spirit of "Quality, Performance, Innovation and Integrity". We goal to create more value for our clients with our abundant resources, advanced machinery, experienced workers and superb solutions for 2018 Good Quality Grinding Disc For Drill - Cutting disc FS-05 series – TAA , The product will supply to all over the world, such as: Lithuania, Karachi, Hamburg, We have customers from more than 20 countries and our reputation has been recognized by our esteemed customers. Never-ending improvement and striving for 0% deficiency are our two main quality policies. Should you need anything, don't hesitate to contact us.
By Ivy from Qatar - 2018.09.21 11:01
This supplier offers high quality but low price products, it is really a nice manufacturer and business partner.
By Sandra from Germany - 2017.11.12 12:31
Related products
-
Factory selling Gp16 Bearing Steel Grit - Low ...
Product feature High strengthen, high tenacity, long service life. Low breakage, low dust, low pollution. Low wear of the equipments, long life of accessory. Reduce dedusting system load, lengthen usage time of dedusting equipments. Technical specification Chemical Composition% C 0.10-0.20% Si 0.10-0.35% Mn 0.35-1.50% S ≤0.05% P ≤0.05% Other alloy elements Adding Cr Mo Ni B Al Cu etc. Hardness HRC42-48/48-54 Microstructure Duplex structure co...
-
18 Years Factory 0.6mm Aluminum Cut Wire - Bea...
Compared with traditional steel grit made by crushing steel shot, bearing steel grit has the following Features: Raw Material Bearing steel grit is made by Chromium bearing steel which has good harden ability due to its high content of Chromium. Technology Bearing steel grit is made by crushing the forged bearing steel directly which is free from casting defects. Low wear The forged state bearing steel grit with sharp edges has higher mechanical property than traditional cast steel gr...
-
OEM/ODM Manufacturer 0.4mm Stainless Steel Cut ...
Features * Can be used to replace a variety of mineral sands & non-metallic abrasives,such as corundum, silicon carbide, arenaceous quartz, glass beads, etc. * Low dust emissions,improving operating environment, environmental friendly. * Can replace part of the pickling process. * Low dust emission and excellent operating environment, reducing the treatment of pickling waste. * Low comprehensive cost, the service life is 30-100 times that of non-metallic abrasive such as corundum. * ...
-
OEM/ODM China Steel Shot Price - Sponge media ...
Sponge Media abrasive are available in over 20 types,achieving profiles from 0 to 100+ micron. All procides dry, low dust, low rebound blasting. The most commomly used is TAA-S series with aluminum oxide and TAA-G series with steel grit. Type Profiles Abrasive Media Agent Application TAA-S#16 ±100 micron Aluminum Oxide#16 Fast and aggressive for tough industrial coatings. TAA-S#30 ±75 micron Aluminum Oxide#30 Removal of multilayer coatings and profile to 75 micron. TAA-S#30 ±50 micro...
-
factory low price Protective Liner Center - Ha...
As a rule, hanger-type blast machines are offered either for batch or continuous processing. However, there are many intermediate designs that are oriented towards different kinds of overhead conveyor systems. In many cases, different processes such as blasting, painting and subsequent drying can be interconnected via the overhead conveyor system. This makes it possible to tap an enormous potential for streamlining the process workflow. Additional processing variants are created by using diff...
-
Hot Sale for Grinding Wheel - Grinding wheels ...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
