China Factory for Glass Bead Blasting - Copper cut wire – TAA
China Factory for Glass Bead Blasting - Copper cut wire – TAA Detail:
Tech Data
|
Product Description |
Copper Cut Wire Shot |
|
Chemical Composition |
Cu: 58-99%, the rest is Zn |
|
Microhardness |
110~300HV |
|
Tensile Intensity |
200~500Mpa |
|
Durability |
5000 Times |
|
Microstructure |
Deformed αorα+β |
|
Density |
8.9 g/cm3 |
|
Bulk Density |
5.1 g/cm3 |
Available sizes: 1.0mm, 1.5mm, 2.0mm, 2.5mm etc.
Advantage
1. Long life time
2. Less Dust
3. Specific gravity higher than other blasting beads
4. Lower hardness than steel shot &glass beads
5. Shape: Cylindrical/rounded
Application
1. for new and old steel outdoor surface cleaning, descaling, strengthen.
2. as a wear-resistant flooring aggregate, hard floor tiles can be made for the square, garages and other non-slip floor.
3. for counterweight sand, such as cement plants.
4. through after fine processing, suitable for all kinds of denim spray and spray more sophisticated use.
5. the abrasive material (sand, hard abrasive paper, sandpaper, emery cloth).
It is widely used in surface treatment such as descaling, burr removing, elimination of surface defects, internal stress relief, etching, matte, leveling, strengthening and rust prevention before applying in the metal die castings, precision castings, hardware & tools, machinery manufacturing, auto parts, instruments & meters, pumps and valves industries.
Product detail pictures:
Related Product Guide:
With our leading technology as well as our spirit of innovation,mutual cooperation, benefits and development, we will build a prosperous future together with your esteemed company for China Factory for Glass Bead Blasting - Copper cut wire – TAA , The product will supply to all over the world, such as: Malaysia, Pakistan, Jordan, With the support of our highly experienced professionals, we manufacture and supply best quality products. These are quality tested at various occasions to ensure only flawless range is delivered to customers, we also customize the array as per the need of customers to meet the requirement of customers.
By Prudence from Morocco - 2018.06.12 16:22
We have been appreciated the Chinese manufacturing, this time also did not let us disappoint,good job!
By Edward from Moscow - 2017.11.29 11:09
Related products
-
Newly Arrival Metal Abrasive Steel Shot S280 -...
Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. Features 1. Bright colour and lustre...
-
Factory Cheap Cast Zinc Shot - Brown Fused Alu...
Features Alumina oxide abrasive have high hardness and sharp angular, is widely used for both wet and dry blasting, creating the suitable profile for surface preparation. Alumina oxide abrasive is an idea blasting abrasive media for surface preparation requesting ferrous free. Alumina oxide abrasive is high efficiency blasting abrasives with sharp edges and high density. It is reusable and can be used in different types of blasting machine. Technical specification Type Item Appearance A...
-
Popular Design for Sponge Blasting Media - Low...
Product feature High strengthen, high tenacity, long service life. Low breakage, low dust, low pollution. Low wear of the equipments, long life of accessory. Reduce dedusting system load, lengthen usage time of dedusting equipments. Technical specification Chemical Composition% C 0.10-0.20% Si 0.10-0.35% Mn 0.35-1.50% S ≤0.05% P ≤0.05% Other alloy elements Adding Cr Mo Ni B Al Cu etc. Hardness HRC42-48/48-54 Microstructure Duplex structure co...
-
OEM/ODM China Bearing Steel Grit Gh80 - Low Ca...
Product feature High strengthen, high tenacity, long service life. Low breakage, low dust, low pollution. Low wear of the equipments, long life of accessory. Reduce dedusting system load, lengthen usage time of dedusting equipments. Technical specification Chemical Composition% C 0.10-0.20% Si 0.10-0.35% Mn 0.35-1.50% S ≤0.05% P ≤0.05% Other alloy elements Adding Cr Mo Ni B Al Cu etc. Hardness HRC42-48/48-54 Microstructure Duplex structure co...
-
Hot New Products In Drum Shot Blast Machines -...
Advantages of Track-passing shot blasting machine * Reliable blasting technology: Our high performance turbine units are very reliable. They are highly effficient due to the low number of wearing parts, maintenance-friendly design and high abrasive flow rate. * Low maintenance: Regular maintenance helps maintain the value of the machines. Large maintenance doors provide easy access to all essential components and facilitate the rapid replacement of wearing parts. * Innovative filter technolog...
-
Discount Price Horizontal Grinding Wheel - Gri...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
