English
  • product-bg
  • product-bg

China OEM Brown Fused Alumina China - Steel Grit – TAA

China OEM Brown Fused Alumina China - Steel Grit – TAA Featured Image
  • China OEM Brown Fused Alumina China - Steel Grit – TAA

Short Description:


Download as PDF

Product Detail

Product Tags

Related Video

Feedback (2)

To continually enhance the management technique by virtue of your rule of "sincerely, great faith and high-quality are the base of company development", we widely absorb the essence of similar merchandise internationally, and continuously build new merchandise to meet the demands of customers for Bearing Steel Grit Gl25, Steel Grit Gp, 430 0.3mm Stainless Steel Cut Wire Shot, We acquire high-quality as the foundation of our results. Thus, we focus over the manufacture on the finest top quality goods. A strict quality management system has been created to guarantee the caliber of the merchandise.
China OEM Brown Fused Alumina China - Steel Grit – TAA Detail:

Steel Grit001

Available Hardness:
GP: HRC46-50
Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment.
GL: HRC56-60
Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications.
GH: HRC63-65
High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment.

Production Strength:
TAA adopts Arc Furnace Smelting and Double Quenching technology, which guarantee its metal abrasives’ chemical composition and high strength, high tenacity, long service life.

Tech Data: Steel Grit

Chemical Composition%

C

0.85-1.2

Si

0.40-1.2

Mn

0.60-1.2

S

≤0.050

P

≤0.050

Hardness

GP

HRC 46-50

GL

HRC 53-60

GH

HRC 63-65

Density

≥7.4 g/cm3

microstructure

Homogeneous tempered martensite or Troostite

Appearance

Angular

Size distribution

Screen No.

In

Screen Size

SAE J444

G10

G12

G14

G16

G18

G25

G40

G50

G80

G120

6

0.132

3.35

7

0.111

2.80

All Pass

8

0.0937

2.36

All Pass

10

0.0787

2.00

≥80%

All Pass

12

0.0661

1.70

≥90%

≥80%

All Pass

14

0.0555

1.40

≥90%

≥80%

All Pass

16

0.0469

1.18

≥90%

≥75%

All Pass

18

0.0394

1.00

≥85%

≥75%

All

20

0.0331

0.850

25

0.0280

0.710

≥85%

≥70%

All

Pass

30

0.0232

0.600

35

0.0197

0.500

40

0.0165

0.425

≥80%

≥70%

All Pass

45

0.0138

0.355

50

0.0117

0.300

≥80%

≥65%

All Pass

80

0.007

0.180

≥75%

≥65%

120

0.0049

0.125

≥75%

≥60%

200

0.0029

0.075

≥75%

Application

Blast cleaning: Used for blast cleaning of casting, die-casting, forging; sand removal of casting, steel plate, H type steel, steel structure.
Rust removal: Rust removal of casting, forging, steel plate, H type steel, steel structure.
Sand blasting: Sand blasting of profile steel, ship board, steel board, steel material, steel structure.
Pre-treatment: Pre-treatment of surface, steel board, profile steel, steel structure, before painting or coating.

Product detail pictures:

China OEM Brown Fused Alumina China - Steel Grit – TAA detail pictures

Related Product Guide:
"Based on domestic market and expand overseas business" is our development strategy for China OEM Brown Fused Alumina China - Steel Grit – TAA , The product will supply to all over the world, such as: India, Kuwait, Bhutan, In the new century, we promote our enterprise spirit "United, diligent, high efficiency, innovation", and stick to our policy"basing on quality, be enterprising, striking for first class brand". We would take this golden opportunity to create bright future.
    • The sales person is professional and responsible, warm and polite, we had a pleasant conversation and no language barriers on communication.
    5 Stars By Ricardo from United Kingdom - 2017.08.21 14:13
    Company director has very rich management experience and strict attitude, sales staff are warm and cheerful, technical staff are professional and responsible,so we have no worry about product,a nice manufacturer.
    5 Stars By Astrid from Holland - 2018.10.01 14:14
    Write your message here and send it to us

    Related products

    • Europe style for Disc For Cutting Metal - Cutting disc FS-05 series – TAA

      Europe style for Disc For Cutting Metal - Cutt...

      Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...

      See more products >
    • Good Wholesale Vendors Brick Cutting Disc - Cutting disc FS-05 series – TAA

      Good Wholesale Vendors Brick Cutting Disc - Cu...

      Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...

      See more products >
    • 2018 Latest Design Cut Wire Shot 0.4mm - Steel Grit – TAA

      2018 Latest Design Cut Wire Shot 0.4mm - Steel...

      Available Hardness: GP: HRC46-50 Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment. GL: HRC56-60 Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications. GH: HRC63-65 High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment. Production Strength: TAA adopts Arc Furnace Smelting an...

      See more products >
    • Hot Sale for Flexible Packaging Cast Steel Shot 1mm - Zinc cut wire – TAA

      Hot Sale for Flexible Packaging Cast Steel Shot...

      Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. Features 1. Bright colour and lustre...

      See more products >
    • OEM Factory for Brown Fused Alumina Bulk Density - Zinc cut wire – TAA

      OEM Factory for Brown Fused Alumina Bulk Densit...

      Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. Features 1. Bright colour and lustre...

      See more products >
    • Hot New Products Glass Beads 100# - Stainless steel cut wire shot – TAA

      Hot New Products Glass Beads 100# - Stainless ...

      Stainless steel cut wire shot is widely used for the shot/air blasting of various types of non-ferrous metal castings, stainless steel products, aluminum parts, hardware tools, natural stone, etc, highlighting the metal color and achieving smooth, rust-free, matt fi nishing surface treatment eff ect. With good quality stainless steel wire raw material, stainless steel shot is featured with uniform particles and hardness, which guarantees its long service life and good blasting eff ect. The pe...

      See more products >
    Hit enter to search or ESC to close