• product-bg
  • product-bg

Bearing Steel Grit Gl25

Assume full accountability to satisfy all demands of our consumers; reach ongoing advancements by endorsing the expansion of our purchasers; come to be the final permanent cooperative partner of clients and maximize the interests of clientele for Bearing Steel Grit Gl25, Aluminum Cut Wire 0.6mm, 410 0.2mm Stainless Steel Cut Wire Shot, Cast Steel Shot For Surface Cleaning, We hope to establish additional organization interactions with prospects all over the entire world. So as to provide you with ease and enlarge our business, we even have inspectors in QC Crew and guarantee you our best company and solution for Bearing Steel Grit Gl25, we always keep our credit and mutual benefit to our client, insist our high quality service to moving our clients. always welcome the our friends and clients to come and visit our company and guid our business, if you are interested in our products, you can also submit your purchase information online, and we will contact you immediately, we keep our highly sincere cooperation and wish everything in your side are all well.


  • 2018 Latest Design Cut Wire Shot 0.4mm - Zinc cut wire – TAA

    2018 Latest Design Cut Wire Shot 0.4mm - Zinc cut wire – TAA

    Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. Features 1. Bright colour and ...
  • 8 Year Exporter Carbon Steel Cut Wire 0.5mm - Sponge media abrasives – TAA

    8 Year Exporter Carbon Steel Cut Wire 0.5mm - Sponge media abrasives – TAA

    Sponge Media abrasive are available in over 20 types,achieving profiles from 0 to 100+ micron. All procides dry, low dust, low rebound blasting. The most commomly used is TAA-S series with aluminum oxide and TAA-G series with steel grit. Type Profiles Abrasive Media Agent Application TAA-S#16 ±100 micron Aluminum Oxide#16 Fast and aggressive for tough industrial coatings. TAA-S#30 ±75 micron Aluminum Oxide#30 Removal of multilayer coatings and profile to 75 micron. TAA-S#30 ±50 micro...
  • 100% Original Cylindrical Copper Cut Wire Shot - Zinc cut wire – TAA

    100% Original Cylindrical Copper Cut Wire Shot - Zinc cut wire – TAA

    Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. Features 1. Bright colour and ...
  • Factory best selling Bearing Steel Grit Gl50 - Bearing steel grit – TAA

    Factory best selling Bearing Steel Grit Gl50 - Bearing steel grit – TAA

    Compared with traditional steel grit made by crushing steel shot, bearing steel grit has the following Features: Raw Material Bearing steel grit is made by Chromium bearing steel which has good harden ability due to its high content of Chromium. Technology Bearing steel grit is made by crushing the forged bearing steel directly which is free from casting defects. Low wear The forged state bearing steel grit with sharp edges has higher mechanical property than traditional cast steel gr...
  • Factory made hot-sale Crushed Glass Beads - Low Carbon Steel Shot – TAA

    Factory made hot-sale Crushed Glass Beads - Low Carbon Steel Shot – TAA

    Product feature High strengthen, high tenacity, long service life. Low breakage, low dust, low pollution. Low wear of the equipments, long life of accessory. Reduce dedusting system load, lengthen usage time of dedusting equipments. Technical specification Chemical Composition% C 0.10-0.20% Si 0.10-0.35% Mn 0.35-1.50% S ≤0.05% P ≤0.05% Other alloy elements Adding Cr Mo Ni B Al Cu etc. Hardness HRC42-48/48-54 Microstructure Duple...
  • Hot sale Factory Cutting Garnet - Steel Grit – TAA

    Hot sale Factory Cutting Garnet - Steel Grit – TAA

    Available Hardness: GP: HRC46-50 Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment. GL: HRC56-60 Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications.  GH: HRC63-65 High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment. Production Strength: TAA adopts Arc Furnace Smelti...
  • Factory For Garnet - Steel Grit – TAA

    Factory For Garnet - Steel Grit – TAA

    Available Hardness: GP: HRC46-50 Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment. GL: HRC56-60 Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications. GH: HRC63-65 High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment. Production Strength: TAA adopts Arc Furnace Smelting an...
  • OEM Supply Steel Cut Wire Shot - Glass beads – TAA

    OEM Supply Steel Cut Wire Shot - Glass beads – TAA

    Advantage ■ clean and smooth, not hurt to the mechanical precision of work piece. ■ high mechanical intensity, hardness, flexibility ■ it can be reused several times, the same effect and is not easily broken. ■ uniform size, after blasting sand around the device to maintain a uniform brightness effect, not easy to leave a watermark. ■ high purity and good quality meet the international standard. ■ stable chemistry property, not pollute the metal processed. Technical specification Chemica...
  • Special Design for Aluminum Cut Wire 1.0mm - Stainless steel cut wire shot – TAA

    Special Design for Aluminum Cut Wire 1.0mm - Stainless steel cut wire shot – TAA

    Stainless steel cut wire shot is widely used for the shot/air blasting of various types of non-ferrous metal castings, stainless steel products, aluminum parts, hardware tools, natural stone, etc, highlighting the metal color and achieving smooth, rust-free, matt fi nishing surface treatment eff ect. With good quality stainless steel wire raw material, stainless steel shot is featured with uniform particles and hardness, which guarantees its long service life and good blasting eff ect. The pe...
  • Hot-selling Gp16 Steel Grit - Brown Fused Alumina – TAA

    Hot-selling Gp16 Steel Grit - Brown Fused Alumina – TAA

    Features Alumina oxide abrasive have high hardness and sharp angular, is widely used for both wet and dry blasting, creating the suitable profile for surface preparation. Alumina oxide abrasive is an idea blasting abrasive media for surface preparation requesting ferrous free. Alumina oxide abrasive is high efficiency blasting abrasives with sharp edges and high density. It is reusable and can be used in different types of blasting machine. Technical specification Type Item Appearance A...
  • Hot sale Steel Grit Gp40 - Copper cut wire – TAA

    Hot sale Steel Grit Gp40 - Copper cut wire – TAA

    Tech Data Product Description Copper Cut Wire Shot Chemical Composition Cu: 58-99%, the rest is Zn Microhardness 110~300HV Tensile Intensity 200~500Mpa Durability 5000 Times Microstructure Deformed αorα+β Density 8.9 g/cm3 Bulk Density 5.1 g/cm3 Available sizes: 1.0mm, 1.5mm, 2.0mm, 2.5mm etc. Advantage 1. Long life time 2. Less Dust 3. Specific gravity higher than other blasting beads 4. Lower hardness than steel shot &glass beads 5. Sh...
  • High reputation Stainless Steel Cut Wire Shot Sus304 - Stainless steel cut wire shot – TAA

    High reputation Stainless Steel Cut Wire Shot Sus304 - Stainless steel cut wire shot – TAA

    Stainless steel cut wire shot is widely used for the shot/air blasting of various types of non-ferrous metal castings, stainless steel products, aluminum parts, hardware tools, natural stone, etc, highlighting the metal color and achieving smooth, rust-free, matt fi nishing surface treatment eff ect. With good quality stainless steel wire raw material, stainless steel shot is featured with uniform particles and hardness, which guarantees its long service life and good blasting eff ect. The pe...