China wholesale Gl16 Bearing Steel Grit - Bearing steel grit – TAA
China wholesale Gl16 Bearing Steel Grit - Bearing steel grit – TAA Detail:
Compared with traditional steel grit made by crushing steel shot, bearing steel grit has the following Features:
Raw Material
Bearing steel grit is made by Chromium bearing steel which has good harden ability due to its high content of Chromium.
Technology
Bearing steel grit is made by crushing the forged bearing steel directly which is free from casting defects.
Low wear
The forged state bearing steel grit with sharp edges has higher mechanical property than traditional cast steel grit with ball surfaces.
Technical specification
|
Chemical Composition% |
C |
0.80-1.20 |
|
|
Si |
0.15-1.20 |
||
|
Mn |
0.30-1.20 |
||
|
Cr |
0.60-1.65 |
||
|
S |
<0.050 |
||
|
P |
<0.050 |
||
|
Hardness |
GP:46-50HRC |
GH:>60HRC |
|
|
GL:56-60HRC |
|||
|
GH:>60HRC |
|||
|
Application |
Sand blasting |
Stone cutting |
|
|
Microstructure |
Homogeneous tempered martensite |
||
|
Density |
≥7.5g/cm3 |
||
|
Appearance |
Angular |
||
Application
Sanding blasting for body section, container box body, wild electricity equipment, locomotives, steel structure, port machinery etc.
Stone cutting/granite cutting in gang saw machine
Product detail pictures:
Related Product Guide:
We're also concentrating on improving the things administration and QC program to ensure we could maintain terrific gain from the fiercely-competitive company for China wholesale Gl16 Bearing Steel Grit - Bearing steel grit – TAA , The product will supply to all over the world, such as: Albania, Qatar, Albania, We sincerely hope to cooperate with customers all over the world, if you would like to have more information, please kindly contact us, we are looking forward to building up a great business relationship with you.
By Frederica from Barcelona - 2017.06.29 18:55
The company comply with the contract strict, a very reputable manufacturers, worthy a long-term cooperation.
By Amelia from Florida - 2017.06.19 13:51
Related products
-
Factory supplied Grinding Wheel Company - Cutt...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
Factory wholesale Round Copper Cut Wire Shot -...
Available Hardness: GP: HRC46-50 Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment. GL: HRC56-60 Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications. GH: HRC63-65 High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment. Production Strength: TAA adopts Arc Furnace Smelting an...
-
PriceList for Cut Wire Shot - Low Carbon Steel...
Product feature High strengthen, high tenacity, long service life. Low breakage, low dust, low pollution. Low wear of the equipments, long life of accessory. Reduce dedusting system load, lengthen usage time of dedusting equipments. Technical specification Chemical Composition% C 0.10-0.20% Si 0.10-0.35% Mn 0.35-1.50% S ≤0.05% P ≤0.05% Other alloy elements Adding Cr Mo Ni B Al Cu etc. Hardness HRC42-48/48-54 Microstructure Duplex structure co...
-
OEM Supply 0.6mm Stainless Steel Cut Wire Shot ...
Advantage ■ clean and smooth, not hurt to the mechanical precision of work piece. ■ high mechanical intensity, hardness, flexibility ■ it can be reused several times, the same effect and is not easily broken. ■ uniform size, after blasting sand around the device to maintain a uniform brightness effect, not easy to leave a watermark. ■ high purity and good quality meet the international standard. ■ stable chemistry property, not pollute the metal processed. Technical specification Chemica...
-
Excellent quality Diamond Disc Cutter Blades -...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
Discount Price Brown Fused Aluminum Oxide Powde...
Features * Can be used to replace a variety of mineral sands & non-metallic abrasives,such as corundum, silicon carbide, arenaceous quartz, glass beads, etc. * Low dust emissions,improving operating environment, environmental friendly. * Can replace part of the pickling process. * Low dust emission and excellent operating environment, reducing the treatment of pickling waste. * Low comprehensive cost, the service life is 30-100 times that of non-metallic abrasive such as corundum. * Can B...
