Factory Supply 125mm Grinding Wheel - Grinding wheels FW-09 series – TAA
Factory Supply 125mm Grinding Wheel - Grinding wheels FW-09 series – TAA Detail:
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diamond tools.
Advantages
Safty and environment friendly
Fast cutting and grinding,no break off,no pollution
· High efficiency
Improving efficiency of 30%-50% than traditional cutting disk
| Number | Picture | Specification | Safety Rotary Speed（r/min） | Application | Performance comparisons |
| FW100-09 |  |
100×16 | 12000 | Large aread grinding of iron casting (ductile cast iron, Gray Cast iron) | 1. Grinding iron casting surface, TAA is over 70 times than resin disk, efficiency increased by 100% 2. Grinding steel structure weld area, TAA is 40 times than resin disk, efficiency increased by 100%. 3. Grinding fiber glass, TAA is 40 times than resin disk, efficiency increased by 100%. 4. Grinding marble and ceramic, TAA is 3 times than sintered cutter disk , efficiency increased by 100%. |
| FW125-09 | 125×22.23 | 10000 | |||
| FW150-09 | 150×22.23 | 9500 | |||
| FW180-09 | 180×22.23 | 8500 |
· Long service life
Using brazing technology,diamond on the surface not falling down
TAA diamond Grinding wheel
Product detail pictures:
Related Product Guide:
With a positive and progressive attitude to customer's interest, our enterprise continually improves our products excellent to meet the wants of customers and further focuses on safety, reliability, environmental requirements, and innovation of Factory Supply 125mm Grinding Wheel - Grinding wheels FW-09 series – TAA , The product will supply to all over the world, such as: Ecuador, Grenada, Tunisia, If any item be of interest to you, you should let us know. We will try our best to satisfy your requirements with high quality goods, the best prices and prompt delivery. You should feel free to contact us at any time. We will reply you when we receive your inquiries. Make sure you note that samples are available before we start our business.
By Miriam from kazan - 2017.09.28 18:29
We are long-term partners, there is no disappointment every time, we hope to maintain this friendship later!
By Elma from Macedonia - 2018.06.21 17:11
Related products
-
Hot Sale for Medium Glass Bead Blasting Abrasiv...
Advantage ■ clean and smooth, not hurt to the mechanical precision of work piece. ■ high mechanical intensity, hardness, flexibility ■ it can be reused several times, the same effect and is not easily broken. ■ uniform size, after blasting sand around the device to maintain a uniform brightness effect, not easy to leave a watermark. ■ high purity and good quality meet the international standard. ■ stable chemistry property, not pollute the metal processed. Technical specificatio...
-
High Quality Stainless Steel Polishing Shot - ...
Product feature High strengthen, high tenacity, long service life. Low breakage, low dust, low pollution. Low wear of the equipments, long life of accessory. Reduce dedusting system load, lengthen usage time of dedusting equipments. Technical specification Chemical Composition% C 0.10-0.20% Si 0.10-0.35% Mn 0.35-1.50% S ≤0.05% P ≤0.05% Other alloy elements Adding Cr Mo Ni B Al Cu etc. Hardness HRC42-48/48-54 Microstructure Duplex structure co...
-
Wholesale Price China 1.2mm Copper Cut Wire Sho...
Stainless steel cut wire shot is widely used for the shot/air blasting of various types of non-ferrous metal castings, stainless steel products, aluminum parts, hardware tools, natural stone, etc, highlighting the metal color and achieving smooth, rust-free, matt fi nishing surface treatment eff ect. With good quality stainless steel wire raw material, stainless steel shot is featured with uniform particles and hardness, which guarantees its long service life and good blasting eff ect. The pe...
-
Good Wholesale Vendors G50 Sponge Media Abrasiv...
Aluminum cut wire shot also named as aluminum shot,aluminum beads, aluminum granules, aluminum pellet. It is made from superior quality aluminum wire, appearance is bright, is an ideal media for cleaning and reinforcing the surface of nonferrous metal casting parts. It’s mainly applied for the surface treatment of Aluminum, Zinc products or work pieces with thin wall in shot blasting machine. Tech Data Products Aluminium Cut Wire Shot Chemical Composition Al≥99% Microhar...
-
Free sample for Alloy Steel Grit - Brown Fused...
Features Alumina oxide abrasive have high hardness and sharp angular, is widely used for both wet and dry blasting, creating the suitable profile for surface preparation. Alumina oxide abrasive is an idea blasting abrasive media for surface preparation requesting ferrous free. Alumina oxide abrasive is high efficiency blasting abrasives with sharp edges and high density. It is reusable and can be used in different types of blasting machine. Technical specification Type Item Appearance A...
-
Hot sale Steel Shot S390 - Steel Grit – TAA
Available Hardness: GP: HRC46-50 Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment. GL: HRC56-60 Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications. GH: HRC63-65 High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment. Production Strength: TAA adopts Arc Furnace Smelting an...
