Hot New Products Bearing Steel Grit Gh14 - Zinc cut wire – TAA
Hot New Products Bearing Steel Grit Gh14 - Zinc cut wire – TAA Detail:
Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot.
These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives.
Features
1. Bright colour and lustre
2. Compact structure
3. Little impurity and high purity
4. No premature breakdown or flaking
5. Less dust than either steel or aluminum abrasives
6. Durability: 6500 times
Technological Index
|
Product Description |
Zinc Cut Wire Shot |
|
Chemical Composition |
Zn≥99.9% |
|
Microhardness |
35~45HV |
|
Tensile Intensity |
90~120Mpa |
|
Durability |
6500 Times |
|
Microstructure |
Deformed α |
|
Density |
7.1 g/cm3 |
|
Bulk Density |
4.1g/cm3 |
|
Hardness |
As cut:38-55HV Conditioned:45-60HV |
Available sizes
1. Zinc cut wire: 1.5mm 1.8mm 2.0mm 2.5mm 3.0mm
2. Zinc Shot: 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm
Shapes: As cut(cylindrical), conditioned(rounded)
Application
It is used for removing oxidation skin, burr, eliminating surface defect, removing stress, etching, strengthen, prevention rust before painting of metal die-casting, precision casting, hardware tool, machinery manufacturing, automobile spare parts, apparatus and pump valves.
Product detail pictures:
Related Product Guide:
We take pleasure in an extremely fantastic standing among the our prospects for our great product top quality, competitive cost and the finest support for Hot New Products Bearing Steel Grit Gh14 - Zinc cut wire – TAA , The product will supply to all over the world, such as: Istanbul, Hanover, Serbia, Whether selecting a current product from our catalog or seeking engineering assistance for your application, you can talk to our customer service center about your sourcing requirements. We are looking forward to cooperating with friends from all over the world.
By Sarah from Sri Lanka - 2018.11.28 16:25
A nice supplier in this industry, after a detail and careful discussion, we reached a consensus agreement. Hope that we cooperate smoothly.
By Kay from Cambodia - 2018.06.09 12:42
Related products
-
Personlized Products Pure Aluminium Cut Wire -...
Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. Features 1. Bright colour and lustre...
-
Low MOQ for Steel Shot Abrasive For Surface Tre...
Advantage ■ clean and smooth, not hurt to the mechanical precision of work piece. ■ high mechanical intensity, hardness, flexibility ■ it can be reused several times, the same effect and is not easily broken. ■ uniform size, after blasting sand around the device to maintain a uniform brightness effect, not easy to leave a watermark. ■ high purity and good quality meet the international standard. ■ stable chemistry property, not pollute the metal processed. Technical specification Chemica...
-
Ordinary Discount Fused Alumina And Aluminum Ox...
Available Hardness: GP: HRC46-50 Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment. GL: HRC56-60 Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications. GH: HRC63-65 High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment. Production Strength: TAA adopts Arc Furnace Smelting an...
-
Manufacturer of Glass Bead Blasting Sizes - Br...
Features Alumina oxide abrasive have high hardness and sharp angular, is widely used for both wet and dry blasting, creating the suitable profile for surface preparation. Alumina oxide abrasive is an idea blasting abrasive media for surface preparation requesting ferrous free. Alumina oxide abrasive is high efficiency blasting abrasives with sharp edges and high density. It is reusable and can be used in different types of blasting machine. Technical specification Type Item Appearance A...
-
High Performance Brown Fused Alumina 220# - St...
Features * Can be used to replace a variety of mineral sands & non-metallic abrasives,such as corundum, silicon carbide, arenaceous quartz, glass beads, etc. * Low dust emissions,improving operating environment, environmental friendly. * Can replace part of the pickling process. * Low dust emission and excellent operating environment, reducing the treatment of pickling waste. * Low comprehensive cost, the service life is 30-100 times that of non-metallic abrasive such as corundum. * Can B...
-
Cheapest Factory 80# Glass Beads - Copper cut ...
Tech Data Product Description Copper Cut Wire Shot Chemical Composition Cu: 58-99%, the rest is Zn Microhardness 110~300HV Tensile Intensity 200~500Mpa Durability 5000 Times Microstructure Deformed αorα+β Density 8.9 g/cm3 Bulk Density 5.1 g/cm3 Available sizes: 1.0mm, 1.5mm, 2.0mm, 2.5mm etc. Advantage 1. Long life time 2. Less Dust 3. Specific gravity higher than other blasting beads 4. Lower hardness than steel shot &glass b...
