• product-bg
  • product-bg

Bearing Steel Grit G80

With a sound enterprise credit history, exceptional after-sales services and modern production facilities, we've earned an outstanding track record amongst our consumers across the whole world for Bearing Steel Grit G80, Cut Wire Shot 0.4mm, 430 Stainless Steel Cut Wire Shot 0.5mm, Low Carbon Steel Shot S170, While using the improvement of society and economy, our corporation will retain a tenet of "Focus on trust, high quality the first", moreover, we count on to make a glorious long run with each and every customer. Generally customer-oriented, and it's our ultimate goal for being not only the most trusted, trustable and honest provider, but also the partner for our customers for Bearing Steel Grit G80, In the new century, we promote our enterprise spirit "United, diligent, high efficiency, innovation", and stick to our policy"basing on quality, be enterprising, striking for first class brand". We would take this golden opportunity to create bright future.


  • Hot sale Factory Zinc Cut Wire 1.0mm - Bearing steel grit – TAA

    Hot sale Factory Zinc Cut Wire 1.0mm - Bearing steel grit – TAA

    Compared with traditional steel grit made by crushing steel shot, bearing steel grit has the following Features: Raw Material Bearing steel grit is made by Chromium bearing steel which has good harden ability due to its high content of Chromium. Technology Bearing steel grit is made by crushing the forged bearing steel directly which is free from casting defects. Low wear The forged state bearing steel grit with sharp edges has higher mechanical property than traditional cast steel gr...
  • Factory Promotional Buy Glass Beads Online - Steel Shot – TAA

    Factory Promotional Buy Glass Beads Online - Steel Shot – TAA

    Chemical Composition C 0.85-1.20% Si 0.40-1.20% Mn 0.60-1.20% S ≤0.05% P ≤0.05% Hardness HRC 40-50  Microstructure Homogeneous Tempered Martensite or Troostite Density ≥ 7.2g/cm3 External form Spherical Hollow particles<10% Size distribution Screen No. Inch Screen size S70 S110 S170 S230 S280 S330 S390 S460 S550 S660 S780 S930 6 0.132 3.35                       All pass 7 0.111 2.80                     All pass   8 0.0937 2.36                   All...
  • OEM Manufacturer Wheel Blasting Abrasive - Low Carbon Steel Shot – TAA

    OEM Manufacturer Wheel Blasting Abrasive - Low Carbon Steel Shot – TAA

    Product feature High strengthen, high tenacity, long service life. Low breakage, low dust, low pollution. Low wear of the equipments, long life of accessory. Reduce dedusting system load, lengthen usage time of dedusting equipments. Technical specification Chemical Composition% C 0.10-0.20% Si 0.10-0.35% Mn 0.35-1.50% S ≤0.05% P ≤0.05% Other alloy elements Adding Cr Mo Ni B Al Cu etc. Hardness HRC42-48/48-54 Microstructure Duple...
  • China wholesale 240# Glass Beads - Stainless steel cut wire shot – TAA

    China wholesale 240# Glass Beads - Stainless steel cut wire shot – TAA

    Stainless steel cut wire shot is widely used for the shot/air blasting of various types of non-ferrous metal castings, stainless steel products, aluminum parts, hardware tools, natural stone, etc, highlighting the metal color and achieving smooth, rust-free, matt fi nishing surface treatment eff ect. With good quality stainless steel wire raw material, stainless steel shot is featured with uniform particles and hardness, which guarantees its long service life and good blasting eff ect. The pe...
  • OEM Factory for Sandblasting Glass Beads - Stainless steel cut wire shot – TAA

    OEM Factory for Sandblasting Glass Beads - Stainless steel cut wire shot – TAA

    Stainless steel cut wire shot is widely used for the shot/air blasting of various types of non-ferrous metal castings, stainless steel products, aluminum parts, hardware tools, natural stone, etc, highlighting the metal color and achieving smooth, rust-free, matt fi nishing surface treatment eff ect. With good quality stainless steel wire raw material, stainless steel shot is featured with uniform particles and hardness, which guarantees its long service life and good blasting eff ect. The pe...
  • Factory wholesale Garnet 30/60 Mesh - Aluminum cut wire – TAA

    Factory wholesale Garnet 30/60 Mesh - Aluminum cut wire – TAA

    Aluminum cut wire shot also named as aluminum shot,aluminum beads, aluminum granules, aluminum pellet. It is made from superior quality aluminum wire, appearance is bright, is an ideal media for cleaning and reinforcing the surface of nonferrous metal casting parts. It’s mainly applied for the surface treatment of Aluminum, Zinc products or work pieces with thin wall in shot blasting machine. Tech Data Products Aluminium Cut Wire Shot Chemical Composition Al≥99% Microhar...
  • China Manufacturer for Aluminum Cut Wire 2.0mm - Zinc cut wire – TAA

    China Manufacturer for Aluminum Cut Wire 2.0mm - Zinc cut wire – TAA

    Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. Features 1. Bright colour and ...
  • Factory making Zinc Cut Wire 0.4mm - Carbon steel cut wire shot – TAA

    Factory making Zinc Cut Wire 0.4mm - Carbon steel cut wire shot – TAA

    We made great improvement in material and the techniques on the basis of the traditional production process. Utilizing high quality alloy steel wire as the substrate that higher the mechanical properties and make it more stable. Improving the wiredrawing craft which make the internal organization more dense. Improving the traditional passivation process that completely relying on impacting to reduce the damage during blasting, enhancing the service life.  Item Technical index Chemi...
  • 18 Years Factory High Carbon Cast Steel Shot With High Quality - Stainless steel cut wire shot – TAA

    18 Years Factory High Carbon Cast Steel Shot With High Quality - Stainless steel cut wire shot – TAA

    Stainless steel cut wire shot is widely used for the shot/air blasting of various types of non-ferrous metal castings, stainless steel products, aluminum parts, hardware tools, natural stone, etc, highlighting the metal color and achieving smooth, rust-free, matt fi nishing surface treatment eff ect. With good quality stainless steel wire raw material, stainless steel shot is featured with uniform particles and hardness, which guarantees its long service life and good blasting eff ect. The pe...
  • Manufacturing Companies for Low Carbon Steel Shot - Stainless steel grit – TAA

    Manufacturing Companies for Low Carbon Steel Shot - Stainless steel grit – TAA

    Features * Can be used to replace a variety of mineral sands & non-metallic abrasives,such as corundum, silicon carbide, arenaceous quartz, glass beads, etc. * Low dust emissions,improving operating environment, environmental friendly. * Can replace part of the pickling process. * Low dust emission and excellent operating environment, reducing the treatment of pickling waste. * Low comprehensive cost, the service life is 30-100 times that of non-metallic abrasive such as corundum. * Can B...
  • OEM/ODM China Ervin Stainless Steel Grit - Garnet – TAA

    OEM/ODM China Ervin Stainless Steel Grit - Garnet – TAA

    Features ■ Low Dust—The high intrinsic tenacity and a high proportion of the material itself fast the settlement rate and significantly reduce the dust emissions and dust coming from the workpiece, minimizing cleaning effort sandblasting, reducing pollution of the work area. ■ Excellent Surface Quality—It can deep into the voids and uneven parts to clean, thereby completely remove rust, soluble salts and other contaminants; surface blasting process without inserts, will not a...
  • Special Price for Sponge Media Abrasives 220 Mesh - Sponge media abrasives – TAA

    Special Price for Sponge Media Abrasives 220 Mesh - Sponge media abrasives – TAA

    Sponge Media abrasive are available in over 20 types,achieving profiles from 0 to 100+ micron. All procides dry, low dust, low rebound blasting. The most commomly used is TAA-S series with aluminum oxide and TAA-G series with steel grit. Type Profiles Abrasive Media Agent Application TAA-S#16 ±100 micron Aluminum Oxide#16 Fast and aggressive for tough industrial coatings. TAA-S#30 ±75 micron Aluminum Oxide#30 Removal of multilayer coatings and profile to 75 micron. TAA-S#30 ±50 micro...