OEM China 1.2mm Stainless Steel Cut Wire Shot - Stainless steel grit – TAA
OEM China 1.2mm Stainless Steel Cut Wire Shot - Stainless steel grit – TAA Detail:
Features
* Can be used to replace a variety of mineral sands & non-metallic abrasives,such as corundum, silicon carbide, arenaceous quartz, glass beads, etc.
* Low dust emissions,improving operating environment, environmental friendly.
* Can replace part of the pickling process.
* Low dust emission and excellent operating environment, reducing the treatment of pickling waste.
* Low comprehensive cost, the service life is 30-100 times that of non-metallic abrasive such as corundum.
* Can Be Used for Different Machines: blast rooms and blast cabinets as well as in centrifugal wheel blast machines.
* Blasting systems:Both Pressure blast system, Airless blast-cleaning equipment workable.
Technical specification
Hardness: >HRC57
Density: ＞ 7.0g/cm3
|
Screen |
In |
mm |
SG18 |
SG25 |
SG40 |
SG50 |
SG80 |
|
14# |
0.0555 |
1.40 |
All pass |
|
|
|
|
|
16# |
0.0469 |
1.18 |
|
All pass |
|
|
|
|
18# |
0.0394 |
1.00 |
≥75% |
|
All pass |
|
|
|
20# |
0.0331 |
0.85 |
|
|
|
|
|
|
25# |
0.0280 |
0.71 |
≥85% |
≥70% |
|
All pass |
|
|
30# |
0.0232 |
0.60 |
|
|
|
|
|
|
35# |
0.0197 |
0.500 |
|
|
|
|
|
|
40# |
0.0165 |
0.425 |
|
≥80% |
≥70% |
|
All pass |
|
45# |
0.0138 |
0.355 |
|
|
|
|
|
|
50# |
0.0117 |
0.300 |
|
|
≥80% |
≥65% |
|
|
80# |
0.0070 |
0.180 |
|
|
|
≥75% |
≥60% |
|
120# |
0.0049 |
0.125 |
|
|
|
|
≥70% |
Application
* Surface finishing of non-ferrous components
* Surface preparation prior to paint or coating
* Removal of ceramic from investment castings
* Descaling of non-ferrous heat treat parts
* Cleaning of welded joints
* Etching of plastic components prior to bonding
* Anchor profiling for paint and powder coat adhesion
Product detail pictures:
Related Product Guide:
The very rich projects management experiences and one to one service model make the high importance of business communication and our easy understanding of your expectations for OEM China 1.2mm Stainless Steel Cut Wire Shot - Stainless steel grit – TAA , The product will supply to all over the world, such as: Rwanda, Macedonia, Bolivia, Our team knows well the market demands in different countries, and is capable of supplying suitable quality products at the best prices to different markets. Our company has already set up a professional, creative and responsible team to develop clients with the multi-win principle.
By Martina from Portland - 2017.09.22 11:32
This supplier's raw material quality is stable and reliable, has always been in accordance with the requirements of our company to provide the goods that quality meet our requirements.
By Hazel from Jeddah - 2017.06.29 18:55
Related products
-
High Quality Stainless Steel Polishing Shot - ...
Product feature High strengthen, high tenacity, long service life. Low breakage, low dust, low pollution. Low wear of the equipments, long life of accessory. Reduce dedusting system load, lengthen usage time of dedusting equipments. Technical specification Chemical Composition% C 0.10-0.20% Si 0.10-0.35% Mn 0.35-1.50% S ≤0.05% P ≤0.05% Other alloy elements Adding Cr Mo Ni B Al Cu etc. Hardness HRC42-48/48-54 Microstructure Duplex structure co...
-
2018 Good Quality Glass Beads 60# - Zinc cut w...
Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. Features 1. Bright colour and ...
-
Manufacturer of Steel Shot Peening Material - ...
Sponge Media abrasive are available in over 20 types,achieving profiles from 0 to 100+ micron. All procides dry, low dust, low rebound blasting. The most commomly used is TAA-S series with aluminum oxide and TAA-G series with steel grit. Type Profiles Abrasive Media Agent Application TAA-S#16 ±100 micron Aluminum Oxide#16 Fast and aggressive for tough industrial coatings. TAA-S#30 ±75 micron Aluminum Oxide#30 Removal of multilayer coatings and profile to 75 micron. TAA-S#30 ±50 micro...
-
Top Suppliers Stainless Steel Cut Wire Shot 0.4...
Features * Can be used to replace a variety of mineral sands & non-metallic abrasives,such as corundum, silicon carbide, arenaceous quartz, glass beads, etc. * Low dust emissions,improving operating environment, environmental friendly. * Can replace part of the pickling process. * Low dust emission and excellent operating environment, reducing the treatment of pickling waste. * Low comprehensive cost, the service life is 30-100 times that of non-metallic abrasive such as corundum. * ...
-
Manufacturing Companies for Electric Blasting M...
Available Spare parts materials Content of Cr-12%, 20%, 25% or as request. Product Features Advanced & scientific precision casting Process and technology . High efficiency and automatic single station drying production line. Special high chromium abrasion casting iron spare parts, making up gaps in the domestic industry. Original Equipment Manufactured (OEM) parts are available. We also offer quality aftermarket parts for other brand machines.
-
Rapid Delivery for 410 0.7mm Stainless Steel Cu...
Features Alumina oxide abrasive have high hardness and sharp angular, is widely used for both wet and dry blasting, creating the suitable profile for surface preparation. Alumina oxide abrasive is an idea blasting abrasive media for surface preparation requesting ferrous free. Alumina oxide abrasive is high efficiency blasting abrasives with sharp edges and high density. It is reusable and can be used in different types of blasting machine. Technical specification Type Item Appearance A...
