OEM Factory for 0.8mm Stainless Steel Cut Wire Shot - Stainless steel grit – TAA
OEM Factory for 0.8mm Stainless Steel Cut Wire Shot - Stainless steel grit – TAA Detail:
Features
* Can be used to replace a variety of mineral sands & non-metallic abrasives,such as corundum, silicon carbide, arenaceous quartz, glass beads, etc.
* Low dust emissions,improving operating environment, environmental friendly.
* Can replace part of the pickling process.
* Low dust emission and excellent operating environment, reducing the treatment of pickling waste.
* Low comprehensive cost, the service life is 30-100 times that of non-metallic abrasive such as corundum.
* Can Be Used for Different Machines: blast rooms and blast cabinets as well as in centrifugal wheel blast machines.
* Blasting systems:Both Pressure blast system, Airless blast-cleaning equipment workable.
Technical specification
Hardness: >HRC57
Density: ＞ 7.0g/cm3
|
Screen |
In |
mm |
SG18 |
SG25 |
SG40 |
SG50 |
SG80 |
|
14# |
0.0555 |
1.40 |
All pass |
||||
|
16# |
0.0469 |
1.18 |
All pass |
||||
|
18# |
0.0394 |
1.00 |
≥75% |
All pass |
|||
|
20# |
0.0331 |
0.85 |
|||||
|
25# |
0.0280 |
0.71 |
≥85% |
≥70% |
All pass |
||
|
30# |
0.0232 |
0.60 |
|||||
|
35# |
0.0197 |
0.500 |
|||||
|
40# |
0.0165 |
0.425 |
≥80% |
≥70% |
All pass |
||
|
45# |
0.0138 |
0.355 |
|||||
|
50# |
0.0117 |
0.300 |
≥80% |
≥65% |
|||
|
80# |
0.0070 |
0.180 |
≥75% |
≥60% |
|||
|
120# |
0.0049 |
0.125 |
≥70% |
Application
* Surface finishing of non-ferrous components
* Surface preparation prior to paint or coating
* Removal of ceramic from investment castings
* Descaling of non-ferrous heat treat parts
* Cleaning of welded joints
* Etching of plastic components prior to bonding
* Anchor profiling for paint and powder coat adhesion
Product detail pictures:
Related Product Guide:
Our pursuit and firm aim should be to "Always fulfill our buyer requirements". We carry on to produce and structure top-quality excellent solutions for equally our aged and new consumers and accomplish a win-win prospect for our consumers as well as us for OEM Factory for 0.8mm Stainless Steel Cut Wire Shot - Stainless steel grit – TAA , The product will supply to all over the world, such as: Atlanta, Vancouver, Berlin, We've a good reputation for stable quality solutions, well received by customers at home and abroad. Our company would be guided by the idea of "Standing in Domestic Markets, Walking into International Markets". We sincerely hope that we could do business with customers both at home and abroad. We expect sincere cooperation and common development!
By Donna from Norwegian - 2017.09.29 11:19
After the signing of the contract, we received satisfactory goods in a short term, this is a commendable manufacturer.
By Sara from Guinea - 2018.10.09 19:07
Related products
-
High reputation Stainless Steel Cut Wire Shot S...
Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. Features 1. Bright colour and lustre...
-
100% Original Factory Gp50 Bearing Steel Grit -...
We made great improvement in material and the techniques on the basis of the traditional production process. Utilizing high quality alloy steel wire as the substrate that higher the mechanical properties and make it more stable. Improving the wiredrawing craft which make the internal organization more dense. Improving the traditional passivation process that completely relying on impacting to reduce the damage during blasting, enhancing the service life. Item Technical index Chemi...
-
Cheap PriceList for Steel Grit Gh50 - Steel Gr...
Available Hardness: GP: HRC46-50 Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment. GL: HRC56-60 Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications. GH: HRC63-65 High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment. Production Strength: TAA adopts Arc Furnace Smelti...
-
Hot sale Gh50 Bearing Steel Grit - Steel Grit ...
Available Hardness: GP: HRC46-50 Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment. GL: HRC56-60 Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications. GH: HRC63-65 High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment. Production Strength: TAA adopts Arc Furnace Smelting an...
-
Online Exporter Shot Blasting Plants - Roller ...
Important Advantages AGTOS blasting technology: Our turbines are strong power units which are highly cost-effective due to fewer wear parts and a high abrasive flfl ow. Easy to maintain The innovative filtering technology convinces through strong performances. Automation Blasting of flfl ame cut pieces in a basket Blasting machine with adjustable passage height Bar blasting machine Blast machine for metal sheets, sections and constructions with a passage height of up to 1000 m Diabolo b...
-
PriceList for S110 Steel Shot - Stainless stee...
Stainless steel cut wire shot is widely used for the shot/air blasting of various types of non-ferrous metal castings, stainless steel products, aluminum parts, hardware tools, natural stone, etc, highlighting the metal color and achieving smooth, rust-free, matt fi nishing surface treatment eff ect. With good quality stainless steel wire raw material, stainless steel shot is featured with uniform particles and hardness, which guarantees its long service life and good blasting eff ect. The pe...
