OEM/ODM Supplier Stone Shot Blasting Machine - Continuous Overhead Rail Shot Blast Machines – TAA
OEM/ODM Supplier Stone Shot Blasting Machine - Continuous Overhead Rail Shot Blast Machines – TAA Detail:
Advantages of Track-passing shot blasting machine
* Reliable blasting technology: Our high performance turbine units are very reliable.
They are highly effficient due to the low number of wearing parts, maintenance-friendly design and high abrasive flow rate.
* Low maintenance: Regular maintenance helps maintain the value of the machines. Large maintenance doors provide easy access to all essential components and facilitate the rapid replacement of wearing parts.
* Innovative filter technology: The innovative filter technology has a convincing and powerful performance.
The special characteristics include the conical filter cartridges which can be replaced quickly and easily via drawer elements outside the casing. These cartridge fi lter systems can also be retrofi tted to older shot blast machines of most makes
* Robust construction: The sturdy construction uses special wear resistant steel with additional linings in areas subject to high wear. All helping to protect the owner’s investment.
There are many versions, types and sizes of catenary shot blasting machines. Their floor space is relatively small.
Because the catenary shot blasting machine is easy to integrate into the logistics system of the factory, it is widely used.
AGTOS Track-passing shot blasting machine are available in different sizes, including the following standard sizes:
| Technical Specifications |
HT 11-13-2-11 | HT 13-17-2-11 | HT 13-21-3-11 | HT 17-17-2-11 | HT 17-23-3-11 | HT 17-27-4-11 | HT 21-23-3-11 | HT 21-23-3-15 |
| Max. hook load (kg) | 400 | 400 | 400 | 800 | 800 | 800 | 800 | 800 |
| Alternative max. hook load (kg) |
800 | 800 | 800 | 1600 | 1600 | 1600 | 1600 | 1600 |
| Work piece diameter (mm) |
1100 | 1300 | 1300 | 1700 | 1700 | 1700 | 2100 | 2100 |
| Height of blasting zone (mm) |
1300 | 1700 | 2100 | 1700 | 2300 | 2700 | 2300 | 2300 |
| Turbine output (kW) | 2×11 | 2×11 | 3×11 | 2×11 | 3×11 | 4×11 | 3×11 | 3×15 |
| Cartridge filter | PF4-09 | PF4-12 | PF4-12 | PF4-12 | PF4-12 | PF4-20 | PF4-20P | PF4-28 |
| Suction output (m5/h) | 2600 | 4500 | 4500 | 4500 | 4500 | 7500 | 7500 | 10000 |
| Residual dust content with secondary filter (mg/m1) |
1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
Product detail pictures:
Related Product Guide:
Our company sticks to the principle of "Quality is the life of the company, and reputation is the soul of it" for OEM/ODM Supplier Stone Shot Blasting Machine - Continuous Overhead Rail Shot Blast Machines – TAA , The product will supply to all over the world, such as: Montreal, Azerbaijan, United States, We always adhere to follow the honesty, mutual benefit, common development, after years of development and the tireless efforts of all staff, now has perfect export system, diversified logistics solutions, thorough meet customer shipping, air transport, international express and logistics services. Elaborate one-stop sourcing platform for our customers!
By Dale from Egypt - 2018.06.12 16:22
Factory equipment is advanced in the industry and the product is fine workmanship, moreover the price is very cheap, value for money!
By Eileen from Mozambique - 2018.09.08 17:09
Related products
-
Chinese wholesale Bearing Steel Grit Gh16 - Co...
Tech Data Product Description Copper Cut Wire Shot Chemical Composition Cu: 58-99%, the rest is Zn Microhardness 110~300HV Tensile Intensity 200~500Mpa Durability 5000 Times Microstructure Deformed αorα+β Density 8.9 g/cm3 Bulk Density 5.1 g/cm3 Available sizes: 1.0mm, 1.5mm, 2.0mm, 2.5mm etc. Advantage 1. Long life time 2. Less Dust 3. Specific gravity higher than other blasting beads 4. Lower hardness than steel shot &glass beads 5. Sh...
-
High reputation Cutting & Grinding Discs -...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
Hot sale Factory Concrete Protective Liner - R...
Advantages of AGTOS rubber belt tumble blast machines Reliable blasting technology Innovative filter technology Many different variants Automation through harmonisation with in-house transport system. AGTOS high-performance turbines: Our turbines are solid, well-constructed pieces of machinery. Due to a smaller number of wear parts and high abrasive throughput, they operate extremely economically. Many different variants: Because of the many different variants, it is possible to build the opt...
-
Hot sale Factory Different Grinding Wheels - C...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
Chinese Professional Stainless Steel Grit - Be...
Compared with traditional steel grit made by crushing steel shot, bearing steel grit has the following Features: Raw Material Bearing steel grit is made by Chromium bearing steel which has good harden ability due to its high content of Chromium. Technology Bearing steel grit is made by crushing the forged bearing steel directly which is free from casting defects. Low wear The forged state bearing steel grit with sharp edges has higher mechanical property than traditional cast steel gr...
-
Discountable price Fused Aluminum Oxides - Alu...
Aluminum cut wire shot also named as aluminum shot,aluminum beads, aluminum granules, aluminum pellet. It is made from superior quality aluminum wire, appearance is bright, is an ideal media for cleaning and reinforcing the surface of nonferrous metal casting parts. It’s mainly applied for the surface treatment of Aluminum, Zinc products or work pieces with thin wall in shot blasting machine. Tech Data Products Aluminium Cut Wire Shot Chemical Composition Al≥99% Microhar...
