Top Quality Sponge Media Abrasives G40 - Stainless steel grit – TAA
Top Quality Sponge Media Abrasives G40 - Stainless steel grit – TAA Detail:
Features
* Can be used to replace a variety of mineral sands & non-metallic abrasives,such as corundum, silicon carbide, arenaceous quartz, glass beads, etc.
* Low dust emissions,improving operating environment, environmental friendly.
* Can replace part of the pickling process.
* Low dust emission and excellent operating environment, reducing the treatment of pickling waste.
* Low comprehensive cost, the service life is 30-100 times that of non-metallic abrasive such as corundum.
* Can Be Used for Different Machines: blast rooms and blast cabinets as well as in centrifugal wheel blast machines.
* Blasting systems:Both Pressure blast system, Airless blast-cleaning equipment workable.
Technical specification
Hardness: >HRC57
Density: ＞ 7.0g/cm3
|
Screen |
In |
mm |
SG18 |
SG25 |
SG40 |
SG50 |
SG80 |
|
14# |
0.0555 |
1.40 |
All pass |
||||
|
16# |
0.0469 |
1.18 |
All pass |
||||
|
18# |
0.0394 |
1.00 |
≥75% |
All pass |
|||
|
20# |
0.0331 |
0.85 |
|||||
|
25# |
0.0280 |
0.71 |
≥85% |
≥70% |
All pass |
||
|
30# |
0.0232 |
0.60 |
|||||
|
35# |
0.0197 |
0.500 |
|||||
|
40# |
0.0165 |
0.425 |
≥80% |
≥70% |
All pass |
||
|
45# |
0.0138 |
0.355 |
|||||
|
50# |
0.0117 |
0.300 |
≥80% |
≥65% |
|||
|
80# |
0.0070 |
0.180 |
≥75% |
≥60% |
|||
|
120# |
0.0049 |
0.125 |
≥70% |
Application
* Surface finishing of non-ferrous components
* Surface preparation prior to paint or coating
* Removal of ceramic from investment castings
* Descaling of non-ferrous heat treat parts
* Cleaning of welded joints
* Etching of plastic components prior to bonding
* Anchor profiling for paint and powder coat adhesion
Product detail pictures:
Related Product Guide:
"Sincerity, Innovation, Rigorousness, and Efficiency" is the persistent conception of our company for the long-term to develop together with customers for mutual reciprocity and mutual benefit for Top Quality Sponge Media Abrasives G40 - Stainless steel grit – TAA , The product will supply to all over the world, such as: Mumbai, Bhutan, Argentina, With a wide range, good quality, reasonable prices and stylish designs, our products are extensively used in beauty and other industries. Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs.
By Polly from azerbaijan - 2018.06.19 10:42
This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.
By Bella from Guatemala - 2018.06.28 19:27
Related products
-
China OEM 0.5mm Carbon Steel Cut Wire - Zinc c...
Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. Features 1. Bright colour and ...
-
Wholesale Price China 100 Grit Garnet Sand - S...
Stainless steel cut wire shot is widely used for the shot/air blasting of various types of non-ferrous metal castings, stainless steel products, aluminum parts, hardware tools, natural stone, etc, highlighting the metal color and achieving smooth, rust-free, matt fi nishing surface treatment eff ect. With good quality stainless steel wire raw material, stainless steel shot is featured with uniform particles and hardness, which guarantees its long service life and good blasting eff ect. The pe...
-
2018 High quality Glass Beads 30# - Bearing st...
Compared with traditional steel grit made by crushing steel shot, bearing steel grit has the following Features: Raw Material Bearing steel grit is made by Chromium bearing steel which has good harden ability due to its high content of Chromium. Technology Bearing steel grit is made by crushing the forged bearing steel directly which is free from casting defects. Low wear The forged state bearing steel grit with sharp edges has higher mechanical property than traditional cast steel gr...
-
Factory For Thinset Grinding Wheel - Cutting d...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
-
Rapid Delivery for Side Plate - Drum type shot...
Advantages of drum shot blast machine Reliable Blasting Technology: Drum shot blast machines are manufactured in several different variants, types and sizes. They are compact and only have a very small footprint. Continuous throughput can be realised by linking several machines. Maintenance-friendly Layout: Regular maintenance is important for preserving the long-term value of the equipment. Large service and inspection doors provide easy access to all of the important components. As a result...
-
Competitive Price for Cut-Off Wheels - Grindin...
Our super-hard alloy tools are produced by brazing. Under certain conditions, a layer of diamond is firmly welded to the metal substrate after a metal solder melting process. This type of product has the characteristics of high grinding efficiency, long service life, safety, environmental protection and pollution-free. Mainly replace the current resin bond corundum cutting and polishing tools, all coarse and medium coarse-grained electroplated diamond tools, and some hot-pressed sintered diam...
