Top Suppliers Stainless Steel Cut Wire Shot 0.4mm - Aluminum cut wire – TAA
Top Suppliers Stainless Steel Cut Wire Shot 0.4mm - Aluminum cut wire – TAA Detail:
Aluminum cut wire shot also named as aluminum shot,aluminum beads, aluminum granules, aluminum pellet. It is made from superior quality aluminum wire, appearance is bright, is an ideal media for cleaning and reinforcing the surface of nonferrous metal casting parts. It’s mainly applied for the surface treatment of Aluminum, Zinc products or work pieces with thin wall in shot blasting machine.
Tech Data
|
Products |
Aluminium Cut Wire Shot |
|
Chemical Composition |
Al≥99% |
|
Microhardness |
45~50HV |
|
Tensile Intensity |
80~240Mpa |
|
Durability |
6500 Times |
|
Microstructure |
Deformed α |
|
Density |
2.7g/cm3 |
|
Bulk Density |
1.5g/cm3 |
|
Appearance |
cylindrical |
Available sizes: 0.6mm, 0.8mm, 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm
Advantages
■ Most economical and lowest consumption
■ Consumption 3-4 times less compare to cast shot
■ No dust formation
■ Faster cleaning
■ Environmental friendly
■ Uniform hardness
■ Stabilized grain size
■ Increased fatigue life of blasted part
Appearance: As-cut(cylindrical)
Application
Surface cleaning and rust removing for cast iron, cast steel, steel plates and steel pipes, metal die casting; precision casting; hardware machinery manufacturing; auto instrumentation, derusting, intensifying, smoothing and so on. Especially used in shot blasting machine and peening machine.
Application
Surface cleaning and rust removing for cast iron, cast steel, steel plates and steel pipes, especially used in shot blasting machine and peening machine.
Product detail pictures:
Related Product Guide:
"Based on domestic market and expand abroad business" is our enhancement strategy for Top Suppliers Stainless Steel Cut Wire Shot 0.4mm - Aluminum cut wire – TAA , The product will supply to all over the world, such as: Sacramento, Islamabad, Slovenia, Qualified R&D engineer will be there for your consultation service and we will try our best to meet your requirements. So please feel free to contact us for inquiries. You'll be able to send us emails or call us for small business. Also you are able to come to our business by yourself to get further knowing of us. And we will surely give you the best quotation and after-sale service. We're ready to build stable and friendly relations with our merchants. To achieve mutual success, we will make our best efforts to build a solid co-operation and transparent communication work with our companions. Above all, we are here to welcome your inquiries for any of our goods and service.
By Agnes from azerbaijan - 2018.09.23 18:44
The factory workers have rich industry knowledge and operational experience, we learned a lot in working with them,we are extremely grateful that we can encount a good company has excellent wokers.
By Laura from Wellington - 2017.09.09 10:18
Related products
-
China wholesale Garnet 120 Mesh - Copper cut w...
Tech Data Product Description Copper Cut Wire Shot Chemical Composition Cu: 58-99%, the rest is Zn Microhardness 110~300HV Tensile Intensity 200~500Mpa Durability 5000 Times Microstructure Deformed αorα+β Density 8.9 g/cm3 Bulk Density 5.1 g/cm3 Available sizes: 1.0mm, 1.5mm, 2.0mm, 2.5mm etc. Advantage 1. Long life time 2. Less Dust 3. Specific gravity higher than other blasting beads 4. Lower hardness than steel shot &glass beads 5. Sh...
-
Factory made hot-sale River Garnet - Garnet &#...
Features ■ Low Dust—The high intrinsic tenacity and a high proportion of the material itself fast the settlement rate and significantly reduce the dust emissions and dust coming from the workpiece, minimizing cleaning effort sandblasting, reducing pollution of the work area. ■ Excellent Surface Quality—It can deep into the voids and uneven parts to clean, thereby completely remove rust, soluble salts and other contaminants; surface blasting process without inserts, will not a...
-
Factory Promotional Zinc Cut Wire 0.5mm - Stee...
Available Hardness: GP: HRC46-50 Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment. GL: HRC56-60 Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications. GH: HRC63-65 High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment. Production Strength: TAA adopts Arc Furnace Smelti...
-
Manufacturer for Glass Beads 80# - Garnet R...
Features ■ Low Dust—The high intrinsic tenacity and a high proportion of the material itself fast the settlement rate and significantly reduce the dust emissions and dust coming from the workpiece, minimizing cleaning effort sandblasting, reducing pollution of the work area. ■ Excellent Surface Quality—It can deep into the voids and uneven parts to clean, thereby completely remove rust, soluble salts and other contaminants; surface blasting process without inserts, will not advers...
-
PriceList for Air Blasting Machine - Blast whe...
TAA high performance blast wheel have proven themselves on the market to be robust, economically efficient and maintenance-friendly. They are available with different turbine wheel diameters and a variety of spare and wear materials (e. g. hard metal). TAA high performance blast wheels are very popular for modernizing conventional shot-blasting machines as well. Product Features Improving shot blasting speed obviously Good wear resistance Reducing energy consumption greatly Extraordinary serv...
-
OEM manufacturer Media Blasting Machine - Blas...
Available Spare parts materials Content of Cr-12%, 20%, 25% or as request. Product Features Advanced & scientific precision casting Process and technology . High efficiency and automatic single station drying production line. Special high chromium abrasion casting iron spare parts, making up gaps in the domestic industry. Original Equipment Manufactured (OEM) parts are available. We also offer quality aftermarket parts for other brand machines.
