Best Price for Thermal Conductivity Brown Fused Alumina - Aluminum cut wire – TAA
Best Price for Thermal Conductivity Brown Fused Alumina - Aluminum cut wire – TAA Detail:
Aluminum cut wire shot also named as aluminum shot,aluminum beads, aluminum granules, aluminum pellet. It is made from superior quality aluminum wire, appearance is bright, is an ideal media for cleaning and reinforcing the surface of nonferrous metal casting parts. It’s mainly applied for the surface treatment of Aluminum, Zinc products or work pieces with thin wall in shot blasting machine.
Tech Data
|
Products |
Aluminium Cut Wire Shot |
|
Chemical Composition |
Al≥99% |
|
Microhardness |
45~50HV |
|
Tensile Intensity |
80~240Mpa |
|
Durability |
6500 Times |
|
Microstructure |
Deformed α |
|
Density |
2.7g/cm3 |
|
Bulk Density |
1.5g/cm3 |
|
Appearance |
cylindrical |
Available sizes: 0.6mm, 0.8mm, 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm
Advantages
■ Most economical and lowest consumption
■ Consumption 3-4 times less compare to cast shot
■ No dust formation
■ Faster cleaning
■ Environmental friendly
■ Uniform hardness
■ Stabilized grain size
■ Increased fatigue life of blasted part
Appearance: As-cut(cylindrical)
Application
Surface cleaning and rust removing for cast iron, cast steel, steel plates and steel pipes, metal die casting; precision casting; hardware machinery manufacturing; auto instrumentation, derusting, intensifying, smoothing and so on. Especially used in shot blasting machine and peening machine.
Application
Surface cleaning and rust removing for cast iron, cast steel, steel plates and steel pipes, especially used in shot blasting machine and peening machine.
Product detail pictures:
Related Product Guide:
To continuously increase the administration process by virtue of the rule of "sincerely, good religion and excellent are the base of company development", we commonly absorb the essence of linked goods internationally, and continually build new solutions to fulfill the requires of shoppers for Best Price for Thermal Conductivity Brown Fused Alumina - Aluminum cut wire – TAA , The product will supply to all over the world, such as: Doha, Ecuador, Ethiopia, We mainly sell in wholesale, with the most popular and easy ways of making payment, which are paying via Money Gram, Western Union, Bank Transfer and Paypal. For any further talk, just feel free to contact our salesmen, who are really good and knowledgeable about our prodcuts.
By Maud from Angola - 2018.09.29 13:24
The supplier cooperation attitude is very good, encountered various problems, always willing to cooperate with us, to us as the real God.
By April from Afghanistan - 2018.06.18 17:25
Related products
-
Good Quality Garnet Blasting Media - Steel Gri...
Available Hardness: GP: HRC46-50 Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment. GL: HRC56-60 Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications. GH: HRC63-65 High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment. Production Strength: TAA adopts Arc Furnace Smelting an...
-
OEM Supply Gh18 Steel Grit - Copper cut wire &...
Tech Data Product Description Copper Cut Wire Shot Chemical Composition Cu: 58-99%, the rest is Zn Microhardness 110~300HV Tensile Intensity 200~500Mpa Durability 5000 Times Microstructure Deformed αorα+β Density 8.9 g/cm3 Bulk Density 5.1 g/cm3 Available sizes: 1.0mm, 1.5mm, 2.0mm, 2.5mm etc. Advantage 1. Long life time 2. Less Dust 3. Specific gravity higher than other blasting beads 4. Lower hardness than steel shot &glass b...
-
Bottom price Sand Blasting Copper Cut Wire Shot...
Product feature High strengthen, high tenacity, long service life. Low breakage, low dust, low pollution. Low wear of the equipments, long life of accessory. Reduce dedusting system load, lengthen usage time of dedusting equipments. Technical specification Chemical Composition% C 0.10-0.20% Si 0.10-0.35% Mn 0.35-1.50% S ≤0.05% P ≤0.05% Other alloy elements Adding Cr Mo Ni B Al Cu etc. Hardness HRC42-48/48-54 Microstructure Duple...
-
Popular Design for Fused Aluminum Oxide Powder ...
Features * Can be used to replace a variety of mineral sands & non-metallic abrasives,such as corundum, silicon carbide, arenaceous quartz, glass beads, etc. * Low dust emissions,improving operating environment, environmental friendly. * Can replace part of the pickling process. * Low dust emission and excellent operating environment, reducing the treatment of pickling waste. * Low comprehensive cost, the service life is 30-100 times that of non-metallic abrasive such as corundum. * Can B...
-
High Quality Blasting Zinc Cut Wire Shot - Ste...
Chemical Composition C 0.85-1.20% Si 0.40-1.20% Mn 0.60-1.20% S ≤0.05% P ≤0.05% Hardness HRC 40-50 Microstructure Homogeneous Tempered Martensite or Troostite Density ≥ 7.2g/cm3 External form Spherical Hollow particles<10% Size distribution Screen No. Inch Screen size S70 S110 S170 S230 S280 S330 S390 S460 S550 S660 S780 S930 6 0.132 3.35 All pass 7 0.111 2.80 All pass 8 0.0937 2.36 All...
-
Factory directly supply Protective Liner Materi...
Advantages of TAA rubber belt tumble blast machines Reliable blasting technology Innovative filter technology Many different variants Automation through harmonisation with in-house transport system. TAA high-performance turbines: Our turbines are solid, well-constructed pieces of machinery. Due to a smaller number of wear parts and high abrasive throughput, they operate extremely economically. Many different variants: Because of the many different variants, it is possible to build the...
