• product-bg
  • product-bg

1200 Brown Fused Aluminum Oxide

To meet the customers' over-expected pleasure , now we have our potent staff to offer our greatest general service which includes internet marketing, sales, planning, output, quality controlling, packing, warehousing and logistics for 1200 Brown Fused Aluminum Oxide, 304 Stainless Steel Cut Wire Shot 0.7mm, Steel Grit G16, Steel Cut Wire, Many years of work experience, we have realized the importance of providing good quality products and the best before-sales and after-sales services. We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of 1200 Brown Fused Aluminum Oxide, Our company abides by the management idea of "keep innovation, pursue excellence". On the basis of assuring the advantages of existing products, we continuously strengthen and extend product development. Our company insists on innovation to promote the sustainable development of enterprise, and make us become the domestic high-quality suppliers.


  • OEM Manufacturer 0.7mm Stainless Steel Cut Wire Shot - Steel Grit – TAA

    OEM Manufacturer 0.7mm Stainless Steel Cut Wire Shot - Steel Grit – TAA

    Available Hardness: GP: HRC46-50 Newly made products with angular, the grit are gradually rounded off in use and its particularly suited for oxide skin pre-treatment. GL: HRC56-60 Harder than GP steel grit, also loses its sharp edges during shot basting and is particularly suited to surface preparation applications.  GH: HRC63-65 High hardness, sharp edges remain during operation, mainly used for compressed air shot blasting equipment. Production Strength: TAA adopts Arc Furnace Smelti...
  • OEM/ODM Supplier High Purity Copper Cut Wire Shot - Low Carbon Steel Shot – TAA

    OEM/ODM Supplier High Purity Copper Cut Wire Shot - Low Carbon Steel Shot – TAA

    Product feature High strengthen, high tenacity, long service life. Low breakage, low dust, low pollution. Low wear of the equipments, long life of accessory. Reduce dedusting system load, lengthen usage time of dedusting equipments. Technical specification Chemical Composition% C 0.10-0.20% Si 0.10-0.35% Mn 0.35-1.50% S ≤0.05% P ≤0.05% Other alloy elements Adding Cr Mo Ni B Al Cu etc. Hardness HRC42-48/48-54 Microstructure Duplex structure co...
  • Discount Price Sponge Jet Technology - Zinc cut wire – TAA

    Discount Price Sponge Jet Technology - Zinc cut wire – TAA

    Made from high grade zinc wire, produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot. These are ideal for deflashing and finishing die castings, normally in wheel blast equipment. Available at competent rates, our products reduce wear and tear on blast equipment compared to most other metallic abrasives. Features 1. Bright colour and ...
  • 100% Original Factory G14 Steel Grit - Copper cut wire – TAA

    100% Original Factory G14 Steel Grit - Copper cut wire – TAA

    Tech Data Product Description Copper Cut Wire Shot Chemical Composition Cu: 58-99%, the rest is Zn Microhardness 110~300HV Tensile Intensity 200~500Mpa Durability 5000 Times Microstructure Deformed αorα+β Density 8.9 g/cm3 Bulk Density 5.1 g/cm3 Available sizes: 1.0mm, 1.5mm, 2.0mm, 2.5mm etc. Advantage 1. Long life time 2. Less Dust 3. Specific gravity higher than other blasting beads 4. Lower hardness than steel shot &glass beads 5. Sh...
  • New Fashion Design for Shot Peening 316 Stainless Steel - Garnet – TAA

    New Fashion Design for Shot Peening 316 Stainless Steel - Garnet – TAA

    Features ■ Low Dust—The high intrinsic tenacity and a high proportion of the material itself fast the settlement rate and significantly reduce the dust emissions and dust coming from the workpiece, minimizing cleaning effort sandblasting, reducing pollution of the work area. ■ Excellent Surface Quality—It can deep into the voids and uneven parts to clean, thereby completely remove rust, soluble salts and other contaminants; surface blasting process without inserts, will not a...
  • Reasonable price for Mesh Garnet Abrasive - Steel Shot – TAA

    Reasonable price for Mesh Garnet Abrasive - Steel Shot – TAA

    Chemical Composition C 0.85-1.20% Si 0.40-1.20% Mn 0.60-1.20% S ≤0.05% P ≤0.05% Hardness HRC 40-50  Microstructure Homogeneous Tempered Martensite or Troostite Density ≥ 7.2g/cm3 External form Spherical Hollow particles<10% Size distribution Screen No. Inch Screen size S70 S110 S170 S230 S280 S330 S390 S460 S550 S660 S780 S930 6 0.132 3.35                       All pass 7 0.111 2.80                     All pass   8 0.0937 2.36                   All...
  • Hot-selling Stainless Steel Grit G18 - Brown Fused Alumina – TAA

    Hot-selling Stainless Steel Grit G18 - Brown Fused Alumina – TAA

    Features Alumina oxide abrasive have high hardness and sharp angular, is widely used for both wet and dry blasting, creating the suitable profile for surface preparation. Alumina oxide abrasive is an idea blasting abrasive media for surface preparation requesting ferrous free. Alumina oxide abrasive is high efficiency blasting abrasives with sharp edges and high density. It is reusable and can be used in different types of blasting machine. Technical specification Type It...
  • Factory wholesale Glass Bead For Sand Blasting - Aluminum cut wire – TAA

    Factory wholesale Glass Bead For Sand Blasting - Aluminum cut wire – TAA

    Aluminum cut wire shot also named as aluminum shot,aluminum beads, aluminum granules, aluminum pellet. It is made from superior quality aluminum wire, appearance is bright, is an ideal media for cleaning and reinforcing the surface of nonferrous metal casting parts. It’s mainly applied for the surface treatment of Aluminum, Zinc products or work pieces with thin wall in shot blasting machine. Tech Data Products Aluminium Cut Wire Shot Chemical Composition Al≥99% Microhar...
  • China Manufacturer for Granite Cutting Grit - Sponge media abrasives – TAA

    China Manufacturer for Granite Cutting Grit - Sponge media abrasives – TAA

    Sponge Media abrasive are available in over 20 types,achieving profiles from 0 to 100+ micron. All procides dry, low dust, low rebound blasting. The most commomly used is TAA-S series with aluminum oxide and TAA-G series with steel grit. Type Profiles Abrasive Media Agent Application TAA-S#16 ±100 micron Aluminum Oxide#16 Fast and aggressive for tough industrial coatings. TAA-S#30 ±75 micron Aluminum Oxide#30 Removal of multilayer coatings and profile to 75 micron. TAA-S#30 ±50 micro...
  • Super Lowest Price Glass Bead Blasting Chrome - Stainless steel cut wire shot – TAA

    Super Lowest Price Glass Bead Blasting Chrome - Stainless steel cut wire shot – TAA

    Stainless steel cut wire shot is widely used for the shot/air blasting of various types of non-ferrous metal castings, stainless steel products, aluminum parts, hardware tools, natural stone, etc, highlighting the metal color and achieving smooth, rust-free, matt fi nishing surface treatment eff ect. With good quality stainless steel wire raw material, stainless steel shot is featured with uniform particles and hardness, which guarantees its long service life and good blasting eff ect. The pe...
  • Bottom price 70/100 Mesh Garnet - Stainless steel grit – TAA

    Bottom price 70/100 Mesh Garnet - Stainless steel grit – TAA

    Features * Can be used to replace a variety of mineral sands & non-metallic abrasives,such as corundum, silicon carbide, arenaceous quartz, glass beads, etc. * Low dust emissions,improving operating environment, environmental friendly. * Can replace part of the pickling process. * Low dust emission and excellent operating environment, reducing the treatment of pickling waste. * Low comprehensive cost, the service life is 30-100 times that of non-metallic abrasive such as corundum. * ...
  • Factory best selling 120# Glass Beads - Aluminum cut wire – TAA

    Factory best selling 120# Glass Beads - Aluminum cut wire – TAA

    Aluminum cut wire shot also named as aluminum shot,aluminum beads, aluminum granules, aluminum pellet. It is made from superior quality aluminum wire, appearance is bright, is an ideal media for cleaning and reinforcing the surface of nonferrous metal casting parts. It’s mainly applied for the surface treatment of Aluminum, Zinc products or work pieces with thin wall in shot blasting machine. Tech Data Products Aluminium Cut Wire Shot Chemical Composition Al≥99% Microhar...